Captain Orso Posted February 27, 2021 Share Posted February 27, 2021 Does Liberation really have a Discord server? The links I've found don't work, and I can find it searching in Discord Where do you actually want to have questions and reports posted? Some posts say, 'in Discord', but you seem to want to keep Discord a secret - see above. Very frustrating, these things, which should be simple and straightforward. When you hit the wrong button on take-off System Specs. Spoiler System board: MSI X670E ACE Memory: 64GB DDR5-6000 G.Skill Ripjaw System disk: Crucial P5 M.2 2TB CPU: AMD Ryzen 7 7800X3D PSU: Corsair HX1200 PSU Monitor: ASUS MG279Q, 27" CPU cooling: Noctua NH-D15S Graphics card: MSI RTX 3090Ti SuprimX VR: Oculus Rift CV1 Link to comment Share on other sites More sharing options...
carlos85 Posted February 27, 2021 Share Posted February 27, 2021 Hi guys, First of all thanks for the great mission. Just one thing, Im playing liberation where you have to conquer the whole persian gulf map, is there a way to 'land a ground units' on the Iran's side of the map (there is no land between them where ground units could travel)? I've lost the north frontline at the beginning of the mission (i was focused too much on the south side and wasn't paying attention). I've noticed you can buy ground units for the LHA-7 amphibious ship but im not sure if there is a way to deploy them? Sorry if this been asked before, I've read the manual and tried to google it with no luck, most likely i've missed something Link to comment Share on other sites More sharing options...
VeeSPIKE Posted February 27, 2021 Share Posted February 27, 2021 12 hours ago, Captain Orso said: Does Liberation really have a Discord server? The links I've found don't work, and I can find it searching in Discord Where do you actually want to have questions and reports posted? Some posts say, 'in Discord', but you seem to want to keep Discord a secret - see above. Very frustrating, these things, which should be simple and straightforward. It does. - https://discord.gg/JDSs7utg 1 Link to comment Share on other sites More sharing options...
Captain Orso Posted February 28, 2021 Share Posted February 28, 2021 5 hours ago, VeeSPIKE said: It does. - https://discord.gg/JDSs7utg Thank you! When you hit the wrong button on take-off System Specs. Spoiler System board: MSI X670E ACE Memory: 64GB DDR5-6000 G.Skill Ripjaw System disk: Crucial P5 M.2 2TB CPU: AMD Ryzen 7 7800X3D PSU: Corsair HX1200 PSU Monitor: ASUS MG279Q, 27" CPU cooling: Noctua NH-D15S Graphics card: MSI RTX 3090Ti SuprimX VR: Oculus Rift CV1 Link to comment Share on other sites More sharing options...
Wood Posted February 28, 2021 Share Posted February 28, 2021 Hey All. This is incredible work but I have lots of questions as this Liberation I'm just getting into. I'd like to ask those of you that have been using this for some time. 1. After creating the Campaign and opening the mission in ME and making changes. Obviously the .liberation file will be different from the mission being generated and the changes made. So, I was wondering if the changes are saved either for multiplayer or SP once you accept the results in the jason file? 2. There is alot of default settings when creating a .liberation campaign. Things like frequencies or tacan channels. Where if at all would I find the file to change those default settings. I've looked in every folder and cant seem to find it. Thanks [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
ZeroReady Posted March 10, 2021 Share Posted March 10, 2021 On 2/28/2021 at 1:35 PM, Wood said: Hey All. This is incredible work but I have lots of questions as this Liberation I'm just getting into. I'd like to ask those of you that have been using this for some time. 1. After creating the Campaign and opening the mission in ME and making changes. Obviously the .liberation file will be different from the mission being generated and the changes made. So, I was wondering if the changes are saved either for multiplayer or SP once you accept the results in the jason file? 2. There is alot of default settings when creating a .liberation campaign. Things like frequencies or tacan channels. Where if at all would I find the file to change those default settings. I've looked in every folder and cant seem to find it. Thanks As long as you aren't adding or removing units it won't matter to Liberation if you change things like waypoints and TOT's. It knows what units are there at the start and knows what gets destroyed, that's all it needs. Open the mission in the ME, make your changes, save and fly. Link to comment Share on other sites More sharing options...
Goofeyfoot Posted March 20, 2021 Share Posted March 20, 2021 (edited) On 2/27/2021 at 11:49 PM, Captain Orso said: Thank you! You posted a link to Discord. The link seems to be outdated? Edited March 20, 2021 by Goofeyfoot Link to comment Share on other sites More sharing options...
VeeSPIKE Posted March 20, 2021 Share Posted March 20, 2021 4 hours ago, Goofeyfoot said: You posted a link to Discord. The link seems to be outdated? The links expire after a while. This one should be current: https://discord.gg/rUHw3nB3 Otherwise, if you search in Discord for DCS: Liberation, you should be able to find the channel that way. Link to comment Share on other sites More sharing options...
Goofeyfoot Posted March 21, 2021 Share Posted March 21, 2021 Got it. Thanks. Link to comment Share on other sites More sharing options...
Cantankerous Posted March 27, 2021 Share Posted March 27, 2021 Hi everyone. Can anyone describe how you can change planes ie fly more than one mission in the turn. in-game ? What I have tried to do is create two client slots in the Liberation mission planner / turn manager at times that would allow me to finish one mission then star another in a different plane/ flight. However I cant seem to figure out how to do it . Is there a vid or a description of this anywhere ? I could not find anything on youtube... Thanks in advance, Cantankerous 1 Link to comment Share on other sites More sharing options...
Gianky Posted March 27, 2021 Share Posted March 27, 2021 Hi Cantankerous! IIRC, once you land after your first mission, if you're in time for the second one, just press ESC to call the menu, then you should see a "choose slot" option in it. Just press it and you'll be able to select your second aircraft. 1 Link to comment Share on other sites More sharing options...
Cantankerous Posted March 27, 2021 Share Posted March 27, 2021 (edited) Thanks Gianky, I watched a recorded Live stream from Tourniquet and saw the same there. Thanks anyway for your quick reply Edited March 27, 2021 by Cantankerous 1 Link to comment Share on other sites More sharing options...
C525 Posted March 28, 2021 Share Posted March 28, 2021 So first of all, like everybody, I love this mod. Problem, when I try to set up a Multiplayer Mission, we can't get the A-10C to work as Client. My buddy can join the server but as soon as he's selecting the spot the game just breaks for him. I tried the same flight, same package, different package...nothing works. As I am running the server, do I have personally need the A-10? Other Aircraft seem to work fine. Cheers Link to comment Share on other sites More sharing options...
Cal1664 Posted April 7, 2021 Share Posted April 7, 2021 Can I get a discord invite please. Link to comment Share on other sites More sharing options...
ZeroReady Posted April 7, 2021 Share Posted April 7, 2021 https://discord.gg/gbVfPBxg 1 Link to comment Share on other sites More sharing options...
Smokey43 Posted April 19, 2021 Share Posted April 19, 2021 Hello Everyone!! I just recently came across this fine addition, haven't installed as I am just now watching some videos to understand how it works. Rather than going thru all of these pages, can anyone tell me if this will generate missions for the Huey? Haven't seen much other than a post that was unanswered. Thanks in advance to anyone who chooses to respond. Link to comment Share on other sites More sharing options...
RedeyeStorm Posted April 20, 2021 Share Posted April 20, 2021 Right now it doesn’t work due to 2.7. It’s being worked on. You can fly choppers and there is an option for ctld. But flying time is long because no FARPS. Link to comment Share on other sites More sharing options...
Smokey43 Posted April 20, 2021 Share Posted April 20, 2021 3 hours ago, RedeyeStorm said: Right now it doesn’t work due to 2.7. It’s being worked on. You can fly choppers and there is an option for ctld. But flying time is long because no FARPS. Thank You for responding. Not much content for the Huey, was hoping I could generate something with a WW2 setting. Link to comment Share on other sites More sharing options...
RedeyeStorm Posted April 20, 2021 Share Posted April 20, 2021 1 hour ago, Smokey43 said: Thank You for responding. Not much content for the Huey, was hoping I could generate something with a WW2 setting. Well that is possible as you can make your own factions quit easily. Link to comment Share on other sites More sharing options...
Mith86Arg Posted April 21, 2021 Share Posted April 21, 2021 (edited) IDK if this answered before (sry if yes) First, not making any changes on flights or anything, just adding a client slot (SP) to the flight i wanna join, no problems so far on full fidelity planes, but today wanted to do a 'relaxing' escort mission, the escort planes are F15C, everything nice and cool 'till i select slot when the mission goes live (the camera got stuck and start flying up then client death). Please guide me on troubleshooting this? In addition, i'm having a few BARCAP flights, off the maps limits Edited April 21, 2021 by Mith86Arg Link to comment Share on other sites More sharing options...
ak22 Posted April 23, 2021 Share Posted April 23, 2021 Thank you for making this i am enjoying liberation, I have few questions how do i capture a airbase? How can i get my ground untis to advance and push towards the enermys buildings etc. 1 Link to comment Share on other sites More sharing options...
VeeSPIKE Posted April 24, 2021 Share Posted April 24, 2021 9 hours ago, ak22 said: Thank you for making this i am enjoying liberation, I have few questions how do i capture a airbase? How can i get my ground untis to advance and push towards the enermys buildings etc. DCS logic for Base captures is: 1) Destroy *ALL* the enemy units assigned to that base; 2) Occupy that base with at least one of your own units. It is important to make sure you killed everything, otherwise it won't work. Advancing is done from your Base Menu. On the Ground Forces HQ tab, set your Frontline Operations to Aggressive, Elimination, or Breakthrough - as explained here: https://github.com/Khopa/dcs_liberation/wiki/Frontline-Strategies-Stances 1 Link to comment Share on other sites More sharing options...
ak22 Posted April 24, 2021 Share Posted April 24, 2021 (edited) 15 hours ago, VeeSPIKE said: DCS logic for Base captures is: 1) Destroy *ALL* the enemy units assigned to that base; 2) Occupy that base with at least one of your own units. It is important to make sure you killed everything, otherwise it won't work. Advancing is done from your Base Menu. On the Ground Forces HQ tab, set your Frontline Operations to Aggressive, Elimination, or Breakthrough - as explained here: https://github.com/Khopa/dcs_liberation/wiki/Frontline-Strategies-Stances thank you when you say occupy the base do i have land on it? or will the AI Vehicels enter it once the enermy hase been cleared? Edited April 24, 2021 by ak22 Link to comment Share on other sites More sharing options...
Gianky Posted April 24, 2021 Share Posted April 24, 2021 The latter, you don't need to land there. Check the F10 map to see when the airbase becomes friendly. Link to comment Share on other sites More sharing options...
ak22 Posted April 24, 2021 Share Posted April 24, 2021 (edited) Edit: I Captured the base! my tanks rolled in and shot the place up Edited April 24, 2021 by ak22 1 Link to comment Share on other sites More sharing options...
Recommended Posts