Tumbleweed Posted November 19, 2015 Share Posted November 19, 2015 Make sure you explore all the cockpit view options as well then. And remember. If a modifier (e.g. jitter ) works with one camera it might as well work with the other cameras. I'd also try numpad arrows etc. in each and every view you explore, including those you are seemingly locked onto something (e.g. F5). As for the special effects. Why don't you record two similar short stints and compare? Personally, since the ridiculous gloom-rather-tham-hdr is gone with 1.5, I don't mind the post effects. Two additional tips: - as with everything else, the new effects are probably also controlled via parameters in view.lua - high sensitivity mouse camera moves look terrible; sensitivity can be adjusted but I'm pretty sure view.lua contains provisions for camera inertia as well Sorry for repeating the same lie but Thank you Bucic :thumbup: I'll have an experiment this weekend when I have some free time. My Hangar: P-51D Mustang - KA-50 Blackshark - A-10C Warthog - F-86F Sabre - FC3 - Combined Arms - UH-1H My Flying Adventures: www.dcs-pilot.com :pilotfly: Link to comment Share on other sites More sharing options...
Hungaromaus Posted November 21, 2015 Share Posted November 21, 2015 There is a good option in War Thunder. You push a button on the joystick, and as long as you hold it down, the pilots sight follows the locked target. So it is a kind of "target head tracking". For me it was binded on my Thrustmaster Hotas X throttle stick button 9. Can i do this in DCS too ? Link to comment Share on other sites More sharing options...
Echo38 Posted November 21, 2015 Share Posted November 21, 2015 (edited) Every flight sim/game I've used since the turn of the century has had padlock in some form, but in each one it works a little differently. I haven't used padlock in DCS, so I don't know exactly how it works, but if it works like it did in Lock On: Modern Air Combat (and I expect it does, because the rest of the camera system hasn't changed), then it will be a toggle rather than a hold-down-the-button thing. Look in your control bindings, under the view categories. You may need to use functions from the View category as well as from View Padlock, or the View Padlock keys may work without any further keys. I don't know; try it out. It probably will only work if you've already got the enemy aircraft within your unobstructed FoV. Edited November 21, 2015 by Echo38 Link to comment Share on other sites More sharing options...
Hungaromaus Posted November 21, 2015 Share Posted November 21, 2015 Every flight sim/game I've used since the turn of the century has had padlock in some form, but in each one it works a little differently. I haven't used padlock in DCS, so I don't know exactly how it works, but if it works like it did in Lock On: Modern Air Combat (and I expect it does, because the rest of the camera system hasn't changed), then it will be a toggle rather than a hold-down-the-button thing. Look in your control bindings, under the view categories. You may need to use functions from the View category as well as from View Padlock, or the View Padlock keys may work without any further keys. I don't know; try it out. It probably will only work if you've already got the enemy aircraft within your unobstructed FoV. Thanks Echo38 ! I will try some bindings and we will see. Link to comment Share on other sites More sharing options...
Bucic Posted November 21, 2015 Author Share Posted November 21, 2015 Thanks Echo38 ! I will try some bindings and we will see. The 1.5 open beta has added a search function in the controls menu. Go wild! ;) https://akaagar.github.io/briefing-room-for-dcs/ F-5E simpit project https://forum.dcs.world/topic/318106-f-5e-simpit-cockpit-dimensions-and-flight-controls/ Link to comment Share on other sites More sharing options...
Bucic Posted November 21, 2015 Author Share Posted November 21, 2015 (edited) Cockpit Visual Recon and Status Bar http://forums.eagle.ru/showthread.php?t=152728 Cockpit exploration: Middle mouse button (scroll wheel) - click twice cycle between camera control and clickable cockpit cursor Middle mouse button (scroll wheel) - hold to quickly move in the vertical lateral plane ; equivalent to [RCtrl + Rshift + Num arrows] [RCtrl + Rshift + Num *] and [RCtrl + Rshift + Num /] - move forward/aft Edited November 24, 2015 by Bucic https://akaagar.github.io/briefing-room-for-dcs/ F-5E simpit project https://forum.dcs.world/topic/318106-f-5e-simpit-cockpit-dimensions-and-flight-controls/ Link to comment Share on other sites More sharing options...
Bucic Posted November 29, 2015 Author Share Posted November 29, 2015 (edited) F4 Look back view [LShift + F4] Move using the same key combinations that are used for in-cockpit 6 DOF movement i.e.: [RCtrl + Rshift + Num arrows] [RCtrl + Rshift + Num *] and [RCtrl + Rshift + Num /] Despite the name by default this camera is set by the A/C engine just below exhaust pipes (in WW2 planes), pointing forward. The most interesting part about the camera is that unlike the F2 external camera this one does not have any floating, bobbing or jitter by default and/U] it retains it angular orientation with respect to the A/C. In other words it's a camera that shows the world as if it was actually attached to the A/C on a set of rods. This particular feature is invaluable in assesment of your flight performance. Start a playback of your takeoff run and use the camera. It's going to show a tiniest motion of your aircraft. It also going to show you that in fact your piloting skills are pitiful, so beware ;) Rudder Coordination Exercises- what the heck is the rudder for???? - ED Forums A question I have: Whatever I did in-game the rotation reference point remained pretty much unchanged. Can I move it in-game somehow? Or is there a mode similar to the LAlt + F2 mode where you lock translation movement of the camera and only rotate? Edited November 30, 2015 by Bucic 1 https://akaagar.github.io/briefing-room-for-dcs/ F-5E simpit project https://forum.dcs.world/topic/318106-f-5e-simpit-cockpit-dimensions-and-flight-controls/ Link to comment Share on other sites More sharing options...
Eight Ball Posted November 30, 2015 Share Posted November 30, 2015 (edited) :clap: Thank you so much Bucic, I had no idea it was possible to move the "F-4" camera around ! It's amazing ! Thanks ED ! Edited November 30, 2015 by Eight Ball Find The Links To All My Mods And Liveries Here (in the gallery) Link to comment Share on other sites More sharing options...
Bucic Posted December 9, 2015 Author Share Posted December 9, 2015 (edited) My recent discovery - the infobar works while in the cockpit view :) So... In cockpit: [LCtrl + ENTER] - controls indicator [LCtrl + Y] - infobar, cycle modes Edited May 4, 2016 by Bucic https://akaagar.github.io/briefing-room-for-dcs/ F-5E simpit project https://forum.dcs.world/topic/318106-f-5e-simpit-cockpit-dimensions-and-flight-controls/ Link to comment Share on other sites More sharing options...
Bucic Posted May 4, 2016 Author Share Posted May 4, 2016 Thank you SiThSpAwN! :thumbup: https://akaagar.github.io/briefing-room-for-dcs/ F-5E simpit project https://forum.dcs.world/topic/318106-f-5e-simpit-cockpit-dimensions-and-flight-controls/ Link to comment Share on other sites More sharing options...
Bucic Posted May 5, 2016 Author Share Posted May 5, 2016 The MiG-15 trailer partial analysis (how it's made) http://forums.eagle.ru/showthread.php?p=2743756#post2743756 https://akaagar.github.io/briefing-room-for-dcs/ F-5E simpit project https://forum.dcs.world/topic/318106-f-5e-simpit-cockpit-dimensions-and-flight-controls/ Link to comment Share on other sites More sharing options...
=DECOY= Posted June 11, 2016 Share Posted June 11, 2016 [ame]https://m.youtube.com/watch?v=aXBaaGoFYUQ&feature=youtu.be[/ame] 1 Water cooled i9-9900K | Maximus Code XI MB | RTX3090 | 64GB | HP Reverb G2 Link to comment Share on other sites More sharing options...
Neon67 Posted July 31, 2016 Share Posted July 31, 2016 How do you lock an aircraft ? is it still actual ? I tried this and the ctrl +F3 once in free view without success LCtrl - F11 free camera - you can place the camera >anywhere< or even fly it. LCtrl - F11 camera can LOCK on an object - 'Numpad .' This way you can make an 'airshow camera'. When the mission begins, and you are on the ground, runway, whatever - hit CTRL-F11, and you are now in the "free cam view". Move the camera to wherever you want, ground, air, doesn't matter. Now hit CTRL-F3 and the camera will start following (tracking) your plane (or whatever object the camera was locked to in the first place). Link to comment Share on other sites More sharing options...
Zabuzard Posted January 19, 2017 Share Posted January 19, 2017 (edited) Sorry, posted in the wrong forum section. Edited January 19, 2017 by Zabuza Link to comment Share on other sites More sharing options...
pegasus1 Posted February 1, 2017 Share Posted February 1, 2017 How can i record at 60fps Ive made a couple of nice videos at 30fps but when i create an AVI at 60fps (irrespective of graphical setting/resolution) the playback stops about every second. My rig is fast enough (2700k@5ghz/16GB 2133mhz Ram/ 780gtx massively OVed and OCed SSD etc) Im using uncompressed AVI but anything over 30fps causes issues on playback. AMD 3800x, Asrock 570X Taichi, 32GB Corsair Platinum, MSI 1080Ti, Corsair MP600 Gen 4 1TB NVMe. Samsung 970 EVO Plus 1TB NVMe, Samsung 860 1TB SSD, Custom Watercooling, AOC 32" 4K Screen. Link to comment Share on other sites More sharing options...
Spasticatedtoad Posted February 1, 2017 Share Posted February 1, 2017 Link to comment Share on other sites More sharing options...
pegasus1 Posted February 1, 2017 Share Posted February 1, 2017 I may be wrong, but I seem to recall that most media players on a PC have a lot of trouble playing large uncompressed AVI files. I used to have the same issue on my old PC. But when I processed the video using a program such as Sony Vegas Movie Studio and created an .mp4 @ 30fps, it would play just fine. As I said, I could be wrong, but it's worth a try. ������ Bang on, once id run it through Handbrake it was silky smooth. Max settings at 1440p and 60fps. Thanks. AMD 3800x, Asrock 570X Taichi, 32GB Corsair Platinum, MSI 1080Ti, Corsair MP600 Gen 4 1TB NVMe. Samsung 970 EVO Plus 1TB NVMe, Samsung 860 1TB SSD, Custom Watercooling, AOC 32" 4K Screen. Link to comment Share on other sites More sharing options...
SnorreSelmer Posted February 1, 2017 Share Posted February 1, 2017 I did the numbers on the RAW AVI in 1080p60, and that alone was 200-250MB/sec. You need an SSD, a fast RAID or 10Gb LAN to pass data that fast. Then, I found that MPC-HC outperforms VLC in most instances. You can also recompress the RAW AVI with the Lagarith lossless codec. Reduces filesize quite a bit, but VLC doesn't doesn't like Lagarith. Sent from my Nexus 5 using Tapatalk ASUS Z170-P w/ Intel i7-7700, 32GB DDR4 RAM, SSDs out the wazoo and a GTX 1080Ti, Oculus Rift CV1, TM Warthog stick and throttle, TM Cougar MFDs, MFG Crosswind pedals and WheelStandPro Warthog (w/ the custom small Warthog plate) Former F-16 Ground Crew @ RNoAF [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
Spasticatedtoad Posted February 2, 2017 Share Posted February 2, 2017 Bang on, once id run it through Handbrake it was silky smooth. Max settings at 1440p and 60fps. Thanks. Awesome! Glad I could help. Link to comment Share on other sites More sharing options...
Baz000 Posted February 11, 2017 Share Posted February 11, 2017 for the life of me I can't figure out the in-game camera system, I made this video but the camera work... I don't like it Link to comment Share on other sites More sharing options...
tmansteve Posted February 26, 2017 Share Posted February 26, 2017 Hi All I have been trying out the camera controls, but when I select Lctrl + F3 after LCtrl + F11 anything beneath my viewpoint is blurred and looks way bad. When I return by F11, it's clear again. Is this normal and does it appear in the final movie. Using 1.5.4 Cheers Steve Link to comment Share on other sites More sharing options...
SnorreSelmer Posted February 26, 2017 Share Posted February 26, 2017 Sounds like a Depth of Field issue.. DoF is calculated from the the player cockpit, not camera location. Sent from my Nexus 5 using Tapatalk ASUS Z170-P w/ Intel i7-7700, 32GB DDR4 RAM, SSDs out the wazoo and a GTX 1080Ti, Oculus Rift CV1, TM Warthog stick and throttle, TM Cougar MFDs, MFG Crosswind pedals and WheelStandPro Warthog (w/ the custom small Warthog plate) Former F-16 Ground Crew @ RNoAF [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
tmansteve Posted February 28, 2017 Share Posted February 28, 2017 This is when I am making a video recording of a Saved Track. All other views are great. Link to comment Share on other sites More sharing options...
DoctorStrop Posted April 1, 2017 Share Posted April 1, 2017 (edited) I did this video to show some of the camera angles. I will probably do it again, as it does not cover the combat aspect. I show how the fly past views half way through. I hope it helps people. Edited May 29, 2017 by DoctorStrop wrong link 1 Windows 10 64bit, Intel i7 6700K, 32GB Corsair 2400Mhz, 970 NVMe 500Gb SSD, GeForce 2080 super, HP Reverb, VKB GF PRO, Thrustmaster Warthog throttle, Thrustmaster Pendular rudders, Windows + DCS :thumbup: My youtube channel Link to comment Share on other sites More sharing options...
REDEYE_CVW-66 Posted April 1, 2017 Share Posted April 1, 2017 Could someone help me with what needs editing so that the default Shift-F4 view for the spirfire become something like this: (If its possible) Link to comment Share on other sites More sharing options...
Recommended Posts