Jump to content

[RESOLVED]Anybody Who Can Understand Logs?


Recommended Posts

I'm getting pauses on my new system. Here is my log for one 5 min flight in F-15 just flying around low.

 

Can anybody spot the problem? The log is loaded with errors and warnings.

 

 

 

=== Log opened UTC 2017-04-21 01:14:39

00000.000 INFO VFS: Using 'Saved Games': "C:\Users\Pete\Saved Games"

00000.072 INFO DCS: DCS/1.5.6.3930 (x86_64; Windows/10.0.15063)

00000.072 INFO DCS: CPU cores: 4, threads: 8, System RAM: 32700 MB

00000.077 INFO EDCORE: (dDispatcher)enterToState_:0

00000.080 INFO Dispatcher: 2017/4/20 19:14 V1508170900

00000.084 INFO INPUT: Device [Keyboard] created deviceId = 1

00000.092 INFO INPUT: Device [Throttle - HOTAS Warthog {4CB7C600-195B-11e7-8006-444553540000}] created deviceId = 2

00000.092 INFO INPUT: Joystick created[Throttle - HOTAS Warthog {4CB7C600-195B-11e7-8006-444553540000}], ForceFeedBack: no

00000.092 INFO INPUT: Device [Joystick - HOTAS Warthog {4CB7C600-195B-11e7-8005-444553540000}] created deviceId = 3

00000.092 INFO INPUT: Joystick created[Joystick - HOTAS Warthog {4CB7C600-195B-11e7-8005-444553540000}], ForceFeedBack: no

00000.093 INFO INPUT: Device [CH PRO PEDALS USB {4CB7C600-195B-11e7-8007-444553540000}] created deviceId = 4

00000.093 INFO INPUT: Joystick created[CH PRO PEDALS USB {4CB7C600-195B-11e7-8007-444553540000}], ForceFeedBack: no

00000.093 INFO INPUT: Device [Mouse] created deviceId = 5

00000.094 INFO INPUT: Device [TrackIR] created deviceId = 6

00000.180 INFO SOUND: loaded 1125 sdefs from "sounds\sdef"

00000.198 INFO SOUND: Using driver: xaudio29

00000.207 INFO SOUND: XAudio2: channel layout: Headphones/Stereo

00000.208 INFO SOUND: Using SSE FTZ/DAZ mode.

00000.440 INFO SOUND: loaded 9 sdefs from ".\coremods\aircraft\c-101\sounds\sdef"

00000.449 INFO SOUND: loaded 19 sdefs from ".\coremods\aircraft\m-2000c\sounds\sdef"

00000.449 ERROR VFS: Can't mount './CoreMods/aircraft/M-2000C/Skins/1/ME' to '/textures/'.

00000.449 ERROR VFS: Can't mount './CoreMods/aircraft/M-2000C/Textures/Weapons' to '/textures/'.

00000.451 INFO SOUND: loaded 10 sdefs from ".\coremods\aircraft\mig-21bis\sounds\sdef"

00000.457 INFO SOUND: loaded 7 sdefs from ".\coremods\aircraft\sa342\sounds\sdef"

00000.626 INFO WorldPlugIns: No 'registryPath' for 'AVIODEV_C-101'

00003.192 INFO GRAPHICSVISTA: Creating Resource "Unicode" of type 1

00003.193 INFO DX11BACKEND: TRUNK renderer init: showShaderError coreCount=1

00003.430 INFO DX11BACKEND: Driver Concurrent Creates - 1

00003.430 INFO DX11BACKEND: Driver Command Lists - 1

00003.431 INFO DX11BACKEND: DX11ShaderBinaries::loadShaders

00003.431 INFO DX11BACKEND: DX11ShaderBinaries::loadCache Bazar/shaders/fxo

00005.469 INFO DX11BACKEND: DX11ShaderBinaries::loadCache done

00005.470 INFO DX11BACKEND: DX11ShaderBinaries::loadCache C:\Users\Pete\Saved Games\DCS\fxo

00005.493 INFO DX11BACKEND: DX11ShaderBinaries::loadCache done

00005.493 INFO DX11BACKEND: DX11ShaderBinaries::loadShaders finished

00005.498 ERROR VFS: Can't mount './Bazar/Textures/Buildings_textures' to '/textures/'.

00005.569 ERROR VFS: Can't mount './Bazar/World/textures/Kilo_636' to '/textures/'.

00005.593 INFO DX11BACKEND: commonPool: 68-128, cbPool: 5-14, samplerPool: 5-16

00005.593 INFO RENDERER: Global metashader cache enabled

00005.593 INFO RENDERER: Loading metashader cache from C:\Users\Pete\Saved Games\DCS\metashaders/

00005.593 INFO RENDERER: Metashader cache: 0 (0) cached shaders out of date

00005.597 ERROR_ONCE DX11BACKEND: rendertarget 'HeatAir' not found

00005.638 ERROR_ONCE DX11BACKEND: rendertarget 'rtDynamicCloudMap' not found

00005.639 INFO EDTERRAINGRAPHICS3: edtg::CreateSurfaceRenderItem()

00005.653 INFO DCS: gDescription: "NVIDIA GeForce GTX 1060 6GB" gVendorId: 4318 gDeviceId: 7171 gMemory: 6084 MB

00005.664 ERROR EDOBJECTS: Destruction shape not found AVIASHTAB_CRASH

00005.665 INFO TERRAIN: lSystem::lSystem

00005.747 INFO EDCORE: (dDispatcher)enterToState_:1

00005.830 ERROR VFS: add_location {"My Missions", "C:\Users\Pete\Saved Games\DCS\Missions"}: path already added as "My Missions"

00006.804 INFO GUI_RENDER: Cannot load font [C:\Program Files\Eagle Dynamics\DCS World\dxgui\skins\fonts\]!

00007.350 INFO EDTERRAINGRAPHICS3: edtg::CreateSurfaceRenderItem()

00008.176 INFO EDCORE: (dDispatcher)enterToState_:2

00008.227 INFO EDCORE: (dDispatcher)enterToState_:3

00009.820 INFO NET: Login success.

00596.489 INFO TERRAIN: lSystem::Init

00596.489 INFO EDTERRAINGRAPHICS3: edtg::Init()

00596.489 INFO EDTERRAINGRAPHICS3: lma: .///Bazar/Graphics/lma/edge_land.lua

00596.489 INFO EDTERRAINGRAPHICS3: lma: .///Bazar/Graphics/lma/edge_landheight.lua

00596.490 INFO EDTERRAINGRAPHICS3: lma: .///Bazar/Graphics/lma/edge_lights.lua

00596.490 INFO EDTERRAINGRAPHICS3: lma: .///Bazar/Graphics/lma/edge_map.lua

00596.491 INFO EDTERRAINGRAPHICS3: lma: .///Bazar/Graphics/lma/edge_mfd.lua

00596.491 INFO EDTERRAINGRAPHICS3: lma: .///Bazar/Graphics/lma/edge_shelf.lua

00596.491 INFO EDTERRAINGRAPHICS3: lma: .///Bazar/Graphics/lma/edge_landmask.lua

00596.491 INFO EDTERRAINGRAPHICS3: lma: .///Bazar/Graphics/lma/edge_grassheight.lua

00596.492 INFO EDTERRAINGRAPHICS3: lma: .///Bazar/Graphics/lma/edge_cascadshadows.lua

00596.492 INFO EDTERRAINGRAPHICS3: lma: .///Bazar/Graphics/lma/edge_radar.lua

00596.492 INFO EDTERRAIN: CreateTerraDispatch

00596.492 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 create

00596.492 INFO EDTERRAIN: SetTerraDispatch

00596.492 INFO TERRAIN: lSystem::Load()

00596.494 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(file=./Mods/terrains/CaucasusBase\terrain.cfg.lua, season=spring, quality=high, lang=en)

00596.495 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(landfile3)

00596.525 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(roads3)

00596.555 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(vfstextures)

00596.698 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(superficial3)

00596.745 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(map3)

00597.017 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(smallshit)

00597.018 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(scene3)

00597.018 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(districts)

00597.050 INFO EDOBJECTS: shape trees_1_blk not found in shapetables

00597.050 INFO EDOBJECTS: shape trees_3_blk not found in shapetables

00597.050 INFO EDOBJECTS: shape trees_5_blk not found in shapetables

00597.050 INFO EDOBJECTS: shape trees_6_blk not found in shapetables

00597.050 INFO EDOBJECTS: shape trees_7_blk not found in shapetables

00597.050 INFO EDOBJECTS: shape trees_8_blk not found in shapetables

00597.050 INFO EDOBJECTS: shape trees_9_blk not found in shapetables

00597.050 INFO EDOBJECTS: shape trees_2_blk not found in shapetables

00597.050 INFO EDOBJECTS: shape trees_4_blk not found in shapetables

00597.056 INFO EDTERRAINGRAPHICS3: edtg::InitTerrain()

00597.056 INFO TERRAIN: lSystem::InitSurface()

00597.064 INFO TERRAIN: lSystem::InitScenes()

00597.287 INFO EDTERRAINGRAPHICS3: edtg::DeleteSurfaceRenderItem()

00597.288 INFO WORLDGENERAL: loading mission from: "C:\Users\Pete\AppData\Local\Temp\DCS\tempMission.miz"

00597.363 INFO EDCORE: (dDispatcher)enterToState_:4

00597.558 ERROR WORLDGENERAL: SA342L : net_animation exceed 32 args!

00597.559 ERROR WORLDGENERAL: SA342Mistral : net_animation exceed 32 args!

00597.562 INFO wInfo: multiple adapters

00597.687 WARNING LOG: 1 duplicate message(s) skipped.

00597.687 INFO TERRAIN: lSystem::Load()

00597.687 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Exit(vfstextures)

00597.687 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(file=./Mods/terrains/CaucasusBase\terrain.cfg.lua, season=spring, quality=high, lang=english)

00597.689 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(vfstextures)

00597.783 INFO DX11BACKEND: Reloading textures ...

00597.790 INFO TERRAIN: lSystem::InitSurface()

00597.791 INFO TERRAIN: lSystem::InitScenes()

00597.844 INFO EDTERRAINGRAPHICS3: edtg::CreateSurfaceRenderItem()

00601.522 WARNING LOG: 12 duplicate message(s) skipped.

00601.522 ERROR_ONCE DX11BACKEND: rendertarget 'SmokeTrailNoiseTex' not found

00601.536 ERROR_ONCE DX11BACKEND: texture 'wic/normal_huge.png' not found

00601.538 ERROR_ONCE DX11BACKEND: texture 'normal_tmp.png' not found

00601.540 ERROR_ONCE DX11BACKEND: texture 'testAtlas.dds' not found

00601.543 ERROR VFS: Can't open file models/groundExplosion_03_01.lua.

00601.543 ERROR EFFECTS: FFX: file 'models/groundExplosion_03_01.lua' is not exist

00601.543 ERROR EFFECTS: FFX effect 'groundExplosion_03_01' not loaded

00601.544 ERROR VFS: Can't open file models/groundExplosion_03_02.lua.

00601.544 ERROR EFFECTS: FFX: file 'models/groundExplosion_03_02.lua' is not exist

00601.544 ERROR EFFECTS: FFX effect 'groundExplosion_03_02' not loaded

00601.545 ERROR VFS: Can't open file models/groundExplosion_03_03.lua.

00601.545 ERROR EFFECTS: FFX: file 'models/groundExplosion_03_03.lua' is not exist

00601.545 ERROR EFFECTS: FFX effect 'groundExplosion_03_03' not loaded

00601.545 ERROR VFS: Can't open file models/groundExplosion_03_04.lua.

00601.545 ERROR EFFECTS: FFX: file 'models/groundExplosion_03_04.lua' is not exist

00601.545 ERROR EFFECTS: FFX effect 'groundExplosion_03_04' not loaded

00601.546 ERROR VFS: Can't open file models/groundExplosion_03_05.lua.

00601.546 ERROR EFFECTS: FFX: file 'models/groundExplosion_03_05.lua' is not exist

00601.546 ERROR EFFECTS: FFX effect 'groundExplosion_03_05' not loaded

00601.548 ERROR EFFECTS: OParticleSystem: error reading 'groundExplosion' emitter in Config/Effects/ParticleSystem2/groundExplosion.lua

00601.550 ERROR VFS: Can't open file models/barrel01.psm.

00601.550 ERROR EFFECTS: OParticleSystem: file models/barrel01.psm not exist

00601.569 INFO DCS: Dispatcher: initial random seed = 7880725

00601.569 INFO DCS: Dispatcher: apply random seed = 7880725

00601.570 INFO WORLDGENERAL: loaded from mission Scripts/World/GPS_GNSS.lua

00601.570 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Init(navigation)

00601.651 ERROR VFS: Can't open file //models/tech.edm.json.

00601.654 WARNING WRADIO: Can't create NDB "BS Belosarayskaya" beacon on the water!

00601.964 INFO WORLDGENERAL: loaded from mission Config/View/SnapViewsDefault.lua

00601.965 INFO WORLDGENERAL: loaded from mission Config/View/View.lua

00601.965 INFO WORLDGENERAL: loaded from mission Config/View/Server.lua

00602.013 INFO Config: netview started

00602.015 ERROR VFS: Can't open file //models/maz-6303.edm.json.

00602.017 ERROR VFS: Can't open file //models/ural_4320_k.edm.json.

00602.019 ERROR VFS: Can't open file //models/ural_4320_b.edm.json.

00602.021 ERROR VFS: Can't open file //models/kamaz-tent.edm.json.

00602.022 ERROR VFS: Can't open file //models/uaz-469.edm.json.

00602.024 ERROR VFS: Can't open file //models/vaz.edm.json.

00602.026 ERROR VFS: Can't open file //models/ural_4320_t.edm.json.

00602.028 ERROR VFS: Can't open file //models/gaz-66.edm.json.

00602.029 ERROR VFS: Can't open file //models/ural_atz-10.edm.json.

00602.031 ERROR VFS: Can't open file //models/gaz-3307.edm.json.

00602.032 ERROR VFS: Can't open file //models/zil_kung.edm.json.

00602.033 ERROR VFS: Can't open file //models/gaz-3308.edm.json.

00602.035 ERROR VFS: Can't open file //models/ural_atmz-5.edm.json.

00602.036 ERROR VFS: Can't open file //models/ikarus.edm.json.

00602.095 ERROR VFS: Can't open file //models/kamaz-fire.edm.json.

00602.502 ERROR VFS: Can't open file //models/ukrytie.edm.json.

00602.591 ERROR VFS: Can't open file //models/ural-apa.edm.json.

00602.660 ERROR VFS: Can't open file //models/gaz-66_searchlight.edm.json.

00603.197 WARNING NGMODEL: Model '//models/trees_1_blk.edm' has invalid bounding box.

00603.197 WARNING NGMODEL: Model '//models/trees_3_blk.edm' has invalid bounding box.

00603.198 WARNING NGMODEL: Model '//models/trees_5_blk.edm' has invalid bounding box.

00603.198 WARNING NGMODEL: Model '//models/trees_6_blk.edm' has invalid bounding box.

00603.199 WARNING NGMODEL: Model '//models/trees_7_blk.edm' has invalid bounding box.

00603.205 WARNING NGMODEL: Model '//models/trees_8_blk.edm' has invalid bounding box.

00603.206 WARNING NGMODEL: Model '//models/trees_9_blk.edm' has invalid bounding box.

00603.211 WARNING NGMODEL: Model '//models/trees_2_blk.edm' has invalid bounding box.

00603.212 WARNING NGMODEL: Model '//models/trees_4_blk.edm' has invalid bounding box.

00603.216 INFO DCS: ComplexTask::open_state(). Precached tasks data loading.

00603.216 INFO DCS: ComplexTask::load_task_data(). "Follow_Line" task data loaded.

00603.217 INFO DCS: ComplexTask::load_task_data(). "Follow_Vector" task data loaded.

00603.217 INFO DCS: ComplexTask::load_task_data(). "Follow_Vector_Old" task data loaded.

00603.217 INFO DCS: ComplexTask::load_task_data(). "Approach" task data loaded.

00603.217 INFO DCS: ComplexTask::load_task_data(). "Cannon_Ground_Attack" task data loaded.

00603.217 INFO DCS: ComplexTask::load_task_data(). "Rocket_Attack" task data loaded.

00603.218 INFO DCS: ComplexTask::load_task_data(). "Level_Bombing" task data loaded.

00603.218 INFO DCS: ComplexTask::load_task_data(). "Dive_Bombing" task data loaded.

00603.218 INFO DCS: ComplexTask::load_task_data(). "Missile_Ground_Target_Attack" task data loaded.

00603.218 INFO DCS: ComplexTask::load_task_data(). "Missile_Ground_Target_Level_Attack" task data loaded.

00603.245 ERROR VFS: Can't open file //models/atz-60.edm.json.

00603.259 ERROR VFS: Can't open file //models/btr-80.edm.json.

00603.307 ERROR VFS: Can't open file //models/zwezdny.edm.json.

00603.319 ERROR VFS: Can't open file //models/kaponir.edm.json.

00603.399 ERROR VFS: Can't open file //models/elnya.edm.json.

00603.531 ERROR VFS: Can't open file //models/il-76md.edm.json.

00603.760 ERROR VFS: Can't open file //models/an-26b.edm.json.

00604.030 ERROR GRAPHICSVISTA: Can't open model LAP-CABLES.

00604.459 ERROR_ONCE DX11BACKEND: texture 'su25-paint4-def-01' not found

00604.495 ERROR_ONCE DX11BACKEND: texture 'su25-paint1-def-base' not found

00604.497 ERROR_ONCE DX11BACKEND: texture 'su25-paint6-def-01-base' not found

00605.229 ERROR VFS: Can't open file //models/mig-29.edm.json.

00605.277 ERROR VFS: Can't open file //models/ptb-1500.edm.json.

00605.285 ERROR VFS: Can't open file //models/su-27.edm.json.

00605.404 ERROR Lua::Config: Call error Sounder_create:Can't find sounder GroundUnits/IFV/BTR-80.

00605.408 WARNING LOG: 1 duplicate message(s) skipped.

00605.408 INFO GRAPHICSVISTA: Creating Resource "Unicode" of type 1

00605.533 ERROR VFS: Can't open file //models/f-15.edm.json.

00606.524 ERROR GRAPHICSVISTA: Can't open model TU-22-OBLOMOK-WING-R.

00606.524 ERROR GRAPHICSVISTA: Can't open model TU-22-OBLOMOK-WING-L.

00606.530 ERROR GRAPHICSVISTA: Can't open model TU-22-OBLOMOK-WING-R.

00606.530 ERROR GRAPHICSVISTA: Can't open model TU-22-OBLOMOK-WING-L.

00606.542 ERROR VFS: Can't open file //models/e-3.edm.json.

00608.181 INFO WORLDGENERAL: loaded from mission Scripts/World/birds.lua

00608.181 INFO DCS: dbox failed Initialize -7

00608.296 INFO EDTERRAINGRAPHICS3: Force loading pipeline 'lockon'. Radius 60000.000000. Pos=-301229.750000,5487.785156,665055.750000!

00608.561 INFO EDTERRAINGRAPHICS3: force loading finished!

00608.561 INFO EDTERRAINGRAPHICS3: Force loading pipeline 'map'. Radius 12000.000000. Pos=-301229.750000,5487.785156,665055.750000!

00608.581 INFO EDTERRAINGRAPHICS3: force loading finished!

00610.861 ERROR EDTERRAINGRAPHICS3: Material: edgemat FxMaterial_Runway31 terrain/shaders31/Runway31.fx|FOG_ENABLE|LIGHT_TEXTURE airfield_asphalt_06.png airfield_asphalt_06_nm.png black.png black.png 0

00610.861 ERROR EDTERRAINGRAPHICS3: dont bind geometry edgelgeom 0000000069636698

00610.861 ERROR EDTERRAINGRAPHICS3: no T stream

00610.867 ERROR EDTERRAINGRAPHICS3: Material: edgemat FxMaterial_Runway31 terrain/shaders31/Runway31.fx|FOG_ENABLE|LIGHT_TEXTURE airfield_asphalt_06.png airfield_asphalt_06_nm.png black.png black.png 0

00610.867 ERROR EDTERRAINGRAPHICS3: dont bind geometry edgelgeom 0000000069635E88

00610.867 ERROR EDTERRAINGRAPHICS3: no T stream

00611.027 INFO EDTERRAINGRAPHICS3: edtg::SH::initRenderItems()

00611.031 INFO EDTERRAINGRAPHICS3: edtg::CreateSurfaceRenderItem()

00634.117 INFO DCS: AWACSDBG: added id - 16777472, whois - Tu-22M3 Pilot #1

00634.117 INFO DCS: AWACSDBG: added id - 16777728, whois - Tu-22M3 Pilot #2

00634.214 INFO DCS: AWACSDBG: added id - 16777984, whois - MiG-23MLD Pilot #3

00634.920 INFO DCS: AWACSDBG: added id - 16780288, whois - F-15C Pilot #5

00659.218 INFO DCS: AWACSDBG: removed id - 16777728, whois -

00659.218 INFO DCS: AWACSDBG: removed id - 16777984, whois -

00659.218 INFO DCS: AWACSDBG: removed id - 16780288, whois -

00664.419 INFO DCS: AWACSDBG: added id - 16777472, whois - Tu-22M3 Pilot #1

00664.515 INFO DCS: AWACSDBG: added id - 16778240, whois - MiG-23MLD Pilot #4

00665.016 INFO DCS: AWACSDBG: added id - 16780544, whois - F-15C Pilot #6

00739.321 INFO DCS: AWACSDBG: removed id - 16778240, whois -

00744.020 INFO DCS: AWACSDBG: added id - 16777472, whois - Tu-22M3 Pilot #1

00744.020 INFO DCS: AWACSDBG: added id - 16777728, whois - Tu-22M3 Pilot #2

00744.220 INFO DCS: AWACSDBG: added id - 16777984, whois - MiG-23MLD Pilot #3

00798.917 INFO DCS: AWACSDBG: removed id - 16780288, whois -

00799.115 INFO DCS: AWACSDBG: removed id - 16780544, whois -

00809.118 INFO DCS: AWACSDBG: removed id - 0, whois -

00823.615 INFO DCS: AWACSDBG: added id - 16780288, whois - F-15C Pilot #5

00853.517 INFO DCS: AWACSDBG: added id - 16780544, whois - F-15C Pilot #6

00963.174 INFO Config: netview stopped

00963.234 INFO EDTERRAINGRAPHICS3: edtg::DeleteSurfaceRenderItem()

00963.305 WARNING LOG: 12 duplicate message(s) skipped.

00963.305 ERROR_ONCE DX11BACKEND: rendertarget 'HeatAir' not found

00963.317 INFO EDCORE: (dDispatcher)enterToState_:3

00969.651 INFO EDCORE: (dDispatcher)enterToState_:5

00969.703 INFO SOUND: detaching sdef path ".\mods\aircraft\tf-51d\sounds\sdef"

00969.703 INFO SOUND: detaching sdef path ".\mods\aircraft\p-51d\sounds\sdef"

00969.703 INFO SOUND: detaching sdef path ".\mods\aircraft\flaming cliffs\sounds\sdef"

00969.703 INFO SOUND: detaching sdef path ".\mods\aircraft\a-10c\sounds\sdef"

00969.703 INFO SOUND: detaching sdef path ".\coremods\aircraft\sa342\sounds\sdef"

00969.703 INFO SOUND: detaching sdef path ".\coremods\aircraft\mig-21bis\sounds\sdef"

00969.703 INFO SOUND: detaching sdef path ".\coremods\aircraft\m-2000c\sounds\sdef"

00969.703 INFO SOUND: detaching sdef path ".\coremods\aircraft\c-101\sounds\sdef"

00969.703 INFO SOUND: detaching sdef path "sounds\sdef"

00969.725 INFO TERRAIN: lSystem::Exit()

00969.725 INFO TERRAIN: lSystem::CleanScenes()

00969.725 INFO EDTERRAINGRAPHICS3: edtg::Exit()

00969.750 INFO EDTERRAIN: DeleteTerraDispatch

00969.759 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 Exit(vfstextures)

00969.771 INFO EDTERRAIN: TerraDispatch 000000004CE26EA0 destroy

00970.297 INFO EDTERRAINGRAPHICS3: edtg::DeleteSurfaceRenderItem()

00970.347 WARNING LOG: 1 duplicate message(s) skipped.

00970.347 INFO EDTERRAINGRAPHICS3: edtg::Exit()

=== Log closed.


Edited by BIGNEWY
TITLE

Buzz

Link to comment
Share on other sites

  • Replies 177
  • Created
  • Last Reply

Top Posters In This Topic

@Buzzu

have you ever tried LALT+ENTER to switch in TRUE full screen mode ?

each time i have stutters it disappears with this little turnaround

 

 i7-10700KF CPU  3.80GHz - 32 GO Ram - - nVidia RTX 2070 -  SSD Samsung EVO with LG  TV screen 40"  in 3840x2150 -  cockpit scale 1:1

- MS FFB2 Joystick  - COUGAR F16 throttle  - Saitek Pro Flight Rudder Pedals

 

Link to comment
Share on other sites

I have and it didn't take them away. I've also tried every possible combination of settings in DCS and the Nvidia. Sometimes I think I found the right combination because I won't get any stutters for a couple of minutes, but then they start up again.

 

What's upsetting is I get these stutters while getting 200fps. If I use vync it never moves off of 60fps ever, but it still stutters. Without vync the fps are high but jumping up and down 50fps at a time. it never settles down.

 

ILO2 BOS and COD, iRacing, Asstto Corsa all run as smooth as glass on max setting. That's what confuses me. If there was something wrong with my system why doesn't it affect those games?

Buzz

Link to comment
Share on other sites

try also this force in game: anisotropic to 8x (not 16x). see also the same in nvidia panel

it worked on a friend's high end PC against stutter.

 

don't forget to grab latest nvidia driver for your card also

 

 i7-10700KF CPU  3.80GHz - 32 GO Ram - - nVidia RTX 2070 -  SSD Samsung EVO with LG  TV screen 40"  in 3840x2150 -  cockpit scale 1:1

- MS FFB2 Joystick  - COUGAR F16 throttle  - Saitek Pro Flight Rudder Pedals

 

Link to comment
Share on other sites

should help to know your system spec

here my ingames settings if it could help, I hope

reglagesgraphiques.thumb.jpg.e8fee046cbe90859fed1088417ccb4f5.jpg

 

 i7-10700KF CPU  3.80GHz - 32 GO Ram - - nVidia RTX 2070 -  SSD Samsung EVO with LG  TV screen 40"  in 3840x2150 -  cockpit scale 1:1

- MS FFB2 Joystick  - COUGAR F16 throttle  - Saitek Pro Flight Rudder Pedals

 

Link to comment
Share on other sites

In nvidia settings, try changing:

 

Power Management Mode: Prefer Maximum Performance.

Multiple display/mixed GPU acceleration: Single display performance mode.

Maximum pre-rendered frames: 2

Vertical Sync: Adaptive

 

Make sure you are changing all this for profile: DCS Blackshark.

 

Turn off Lens Effects and Depth of Field in DCS settings, they are not really necessary when flying in the cockpit.

 

If after changing even those and you still have the problem, I'm really not sure comrade!!!


Edited by Kunz
Link to comment
Share on other sites

I give up. I set everything like yours. No change. I'm so disappointed with all this.

 

I really wanted to learn the A-10C. That's why I bought the TM Warthog and this system.

 

I sent my log to ED and have gotten no response. They don't care. They just want to sell modules.

 

Thanks for the help bud.

Buzz

Link to comment
Share on other sites

I had tried that before when I found that video. I just tried it again and it's a big improvement. Maybe only 3-4 stutters for 5 min flying. In my system all the boxes were checked, so I had to remove some. The opposite of what the guy in the video did. The problem is it won't hold the setting. It has to be done everytime I enter a game.

 

I also turned off game mode that came with the Creator update. That helped some too.

 

My CPU is supposed to be 4.2, but in the performance tab in task manager it says 4.45. No mention in advertising this system it was OC'd.

Buzz

Link to comment
Share on other sites

We're headed in the right direction. I just looked at the log for the last flight and these recent settings changes. It only had 7 errors and no warnings. The old log has 300-400 errors and warnings.

 

It might be a placebo, but I swear the plane was easier to fly.

Buzz

Link to comment
Share on other sites

After all, the machine stutters at 200 fps...arghhhhh

 

Given that a Gsync is not an option here is what I would do trying to find the actual reason.

 

A: Hook it up to your TV with HDMI preferably and see if you have the same stutter with a different screen. If you happen to have a 2nd monitor, try that one too. Check if the stutter is consistent across different screens.

 

Let's assume it sticks to your screen and TV was fine.

- Try changing the Hz of your Monitor to a slightly different settings, 59Hz instead of 60.

You can try every Hz value you can dial in, see if that helps. Often, or mostly, stutter is a "teething" problem of gears. Change a gear and see if it likes each other better now.

 

If it happens across all monitors..hmmm..I wonder of Gsync or Freesync would also have it ?

Still, that is no option, just curious.

My Nvidia NV panel is default other than

-SingleDisplay Performance Mode ( default is MultiMonitor )

-High Performance Mode ( default is OPTIMIZED )

 

one more that is for Gsync and refresh rates, you can also try chaanging values there.

 

 

Your PC should have no performance issue CPU GPU SSD or RAM wise, that is all top notch.

 

There is either some Latency on the board that causes hiccups ( Bios update ! ) or some other crucial misunderstanding deep down in your I/O subsystem. Those are hard to find Buzzu and best to do is change as much as you can to get rid off. New Bios, new GPU driver, new Peripherie driver, new SSD Firmware..etc... all those have the potential to cause such lag/latency/stutter.

 

Have you deleted your ../saved games/DCS... folder yet ????

 

 

Bit

  • Like 1

Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Asus 1080ti EK-waterblock - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus PG278Q 27" QHD Gsync 144Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X 

Link to comment
Share on other sites

4.45 is ALL OK ...LoL

 

One core by default can TurboBoost to this speed, NO OVERCLOCKING !!! ALL Intel !!!

 

;)

Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Asus 1080ti EK-waterblock - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus PG278Q 27" QHD Gsync 144Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X 

Link to comment
Share on other sites

No way to try my TV. Trust me. I don't have another monitor. If that was the problem wouldn't it show up in other games? Vid drivers are the latest ones that fix Creator update.

 

Delete the whole DCS folder? Isn't that like deleting the game? All my settings are in there. This is the 3rd install and they all stuttered.

 

The last trick in the above video has just about stopped the stutters. What does that tell us?

Buzz

Link to comment
Share on other sites

just thinking, and throw an other idea looking at the vid.

maybe you have an other process on the same priority thread, i've ever had a probleme like that, can't really remember , but it was something like facetracknoIr + FSX, once I moved one of the two on a second priority thread processor all was OK

have a look on other program working at the same time

 

 i7-10700KF CPU  3.80GHz - 32 GO Ram - - nVidia RTX 2070 -  SSD Samsung EVO with LG  TV screen 40"  in 3840x2150 -  cockpit scale 1:1

- MS FFB2 Joystick  - COUGAR F16 throttle  - Saitek Pro Flight Rudder Pedals

 

Link to comment
Share on other sites

I had tried that before when I found that video. I just tried it again and it's a big improvement.

 

Maybe only 3-4 stutters for 5 min flying. In my system all the boxes were checked, so I had to remove some. The opposite of what the guy in the video did. The problem is it won't hold the setting.

 

It has to be done every time I enter a game.

 

I also turned off game mode that came with the Creator update. That helped some too.

 

My CPU is supposed to be 4.2, but in the performance tab in task manager it says 4.45. No mention in advertising this system it was OC'd.

 

 

Re: The above video and cpu affinity:

 

  1. You can achieve the same thing with DCSW itself, by changing or making an autoexec.cfg file in the config directory, sample of only the cpu affinity options to include listed below.

 

Re: Window file Indexing service:

 

  1. Turn off Windows Search service to stop windows indexing files, due to DCSW creating new files everytime you run a mission, it seems to active a new scan and re-index, taking valuable HDD resources and creating a hug FPS hit in DCSW.
  2. Instructions on how to: (http://www.online-tech-tips.com/computer-tips/simple-ways-to-increase-your-computers-performace-turn-off-indexing-on-your-local-drives/)

 

Re: Nvidia graphics card Drivers:

 

  1. Uninstall all Nvidia software if you have upgraded drivers over the top of existing ones, run a manual cleanout of directories and registry entries as per these instructions (http://www.overclock.net/t/1150443/how-to-remove-your-nvidia-gpu-drivers-new-2016)
  2. Last 2-3 versions of the drivers for my GTX-780 caused a lot of frame rate issues, so going back to and older version may help (378.66 and 378.78 work for me).

 

Results for myself:

 

  1. Runs butter smooth in DCSW v1.216, DCSW v1.56, DCSW 2.05.

Hope this of some help.

 

Regards, Ian.

 

 

--[[
Old graphics.cfg is gone and replaced with graphics.lua.

New method for overriding options is to create (or edit) a file

C:\Users\<YOUR-LOGIN>\Saved Games\DCS\Config\autoexec.cfg

or 

C:\Users\<YOUR-LOGIN>\Saved Games\edModelViewer\Config\autoexec.cfg

(for model viewer)

and place your changes there.

Note:
- autoexec.cfg settings will override the options set via GUI.
- Graphic options in autoexec.cfg should be prefixed with options.graphics.
- file encoding should be UTF-8 without BOM
--]]


-- *******************
-- *******************
-- *** Begin Changes ***
-- *******************
-- *******************
--
options.graphics.render3D = true;    -- Set this to false for a standalone Server Setup.
options.graphics.maxfps = 200;        -- DCS 1.2x 0=unlimited FPS, DCS 1.5x or 2.x 0=0 FPS for load screen, news screen jerky.
affinity_mask = 85;                    -- Only use Real 4 cpu cores and not HyperThreading cores
-- *******************

--[[
-----------------------------
affinity_mask setting sample
-----------------------------
DCS Only uses 2 cores, one for the main calcs, the other for the sound engine
ATTENTION:- (affinity_mask=0) - (Means all cores, default) - good

If you have an I7 or Eqiv AMD you have 8 cores:-
------------------------------------------------
(CPU 0,2,4,6) - Physical Cores
(CPU 1,3,5,7) - HyperThreading Cores

--------------------
CPU  7 6 5 4 3 2 1 0
--------------------
Flag 0 0 0 0 0 1 0 1 (binary) = 0x05 (hexadecimal) = 5  (decimal) good
Flag 0 1 0 1 0 0 0 0 (binary) = 0x50 (hexadecimal) = 80 (decimal) bad
Flag 0 1 0 1 0 1 0 1 (binary) = 0x55 (hexadecimal) = 85 (decimal) good
Flag 0 1 0 0 0 0 0 1 (binary) = 0x41 (hexadecimal) = 65 (decimal) good
Flag 0 0 0 0 1 1 1 1 (binary) = 0x0F (hexadecimal) = 15 (decimal) bad
Flag 1 1 1 1 0 0 0 0 (binary) = 0xF0 (hexadecimal) = 240 (decimal) bad
Flag 1 1 1 1 1 1 1 1 (binary) = 0xFF (hexadecimal) = 255 (decimal) bad
--]]

autoexec.cfg


Edited by MadDog-IC
  • Like 2

Asus p877v-pro, Intel I7 3770k 4.2ghz, 32gb Ripjaw X ram, Nvidia RTX-2070 Super, Samsung 32" TV, Saitek x52 pro Joystick and Combat rudder pedals, TrackIR 5, Win8.1 x64 with SSD and SSHD protected by (Avast AV).

 

DCS Tech Support.

Link to comment
Share on other sites

I tried the suggestions on here as well but unfortunately I am still experiencing stutters with no sign of improvement. I also watched the video posted above regarding engaging all cores, but my settings already showed that all 4 of my cores were selected, so not much gain there...

 

Can someone show me where I can find the logs so that I can also send it to the developers? A path to your log would be a good example for me to follow. I located the DCS folder in file explorer but am having trouble identifying which is the log file.

 

Thanks all!

System Specs || CPU: Intel i5-4690k 3.5 GHz Quad-core / GPU: Gigabyte GeForce GTX 1060 G1 Gaming 6GB / RAM: Corsair Vengeance DDR3 4GB x 2 / SSD: Samsung Evo 850 500GB and PNY 240GB / OS: Windows 10 Pro

Flight Equipment || Stick: Logitech Extreme 3D Pro / Throttle: CH Pro Throttle / Pedals: MFG Crosswind / View: Track IR 5

Link to comment
Share on other sites

You don't want all the cores checked. Just 0.2.4.6. Uncheck the others.

 

I wouldn't bother sending in your log. I haven't heard a peep from them. I'm betting I won't, because they don't have an answer.


Edited by BuzzU

Buzz

Link to comment
Share on other sites

Delete the whole DCS folder? Isn't that like deleting the game? All my settings are in there. This is the 3rd install and they all stuttered.

Even with new install you could have corrupt file in Saved Games folder. Before deleting it you copy and rename it so you can then place folders back into it like control settings.

Can someone show me where I can find the logs so that I can also send it to the developers? A path to your log would be a good example for me to follow.

!

Copy, zip, and attach Logs from here-Windows C. / Users / (your named folder) / Saved Games / DCS / Logs


Edited by cthulhu68

 

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...