HammerUK9 Posted May 6, 2020 Share Posted May 6, 2020 Dear All, The DCS F/A-18 Emergency Jettison button isn't illuminated in sim. The AV-8BNA has the same control and in that aircraft it is illuminated. Can anyone confirm if the button is illuminated in the actual aircraft? Does it differ between Lots or did the DCS reference aircraft not have illumination? I also have to ask about the circuit breakers and throttle rails, which are illuminated in the sim. Are they illuminated in the real jet? I know the CB label panels are illuminated, I'm referring to the CB's themselves. Cheers! Link to comment Share on other sites More sharing options...
K-lu Posted May 6, 2020 Share Posted May 6, 2020 For the emergency, it look not: For the rest: The throttle i dont know. For the circuit breaker, if i have understud right: generaly, the cross on the top of the panel represent the position of the conection for the backlight, pilot can press on if the backlight don't work well for trie to resovle (need to bee confirmif if it's true). Circuit breacker have this cross so i suppose he is backlighted but it's needed to be confirm. For the others panel wath i konw, EXT PWR and GENTIE don't have backlight. Hope it will help you. Link to comment Share on other sites More sharing options...
HammerUK9 Posted May 7, 2020 Author Share Posted May 7, 2020 Thank you, that definitely helps a lot! I have two further questions - where is your circuit breaker photograph sourced from? I'm always looking for new references! Is that a genuine Ground Power panel? If that is yours, would you be able to measure the edges for me? Many thanks if you can! Link to comment Share on other sites More sharing options...
K-lu Posted May 7, 2020 Share Posted May 7, 2020 Thank you, that definitely helps a lot! I have two further questions - where is your circuit breaker photograph sourced from? I'm always looking for new references! Is that a genuine Ground Power panel? If that is yours, would you be able to measure the edges for me? Many thanks if you can! The circuit breaker picture come directly from me. 10 years ago, i was able to visit the old swiss hornet simulator. For the ext power, it's mine yes and i imagine is a real one (if not, is a realy good reproduction). I will take the measurment but probably not before the weekend. K Link to comment Share on other sites More sharing options...
ward8124 Posted May 7, 2020 Share Posted May 7, 2020 I've got the real switch from a hornet and there's no lamp in mate. EVGA GTX1080TISC2 Black Hybrid Cooler, Asus Strix X399, Water cooled ThreadRipper 1920X, Dominator 32GB 3200Mhz,NVME Samsung 250/500GB SSDs, Corsair Air 740 case, Acer Predator 34' Gsync curved display + 3x Alienware 23inch 120hz monitors. TM HOTAS, RAZER - Tiamat,Blackwidow, Mamba, Tartarus and Oculus Rift CV1/DK2 + TrackIR5, MFG crosswinds Oh and a very understanding wife. Link to comment Share on other sites More sharing options...
K-lu Posted May 10, 2020 Share Posted May 10, 2020 Hei The Ground Power panel: 70mm large. 140mm for the right side. 109mm for the left side. 76mm for the front side. Link to comment Share on other sites More sharing options...
HammerUK9 Posted May 10, 2020 Author Share Posted May 10, 2020 Hei The Ground Power panel: 70mm large. 140mm for the right side. 109mm for the left side. 76mm for the front side. Thank you very much indeed :D Link to comment Share on other sites More sharing options...
K-lu Posted May 11, 2020 Share Posted May 11, 2020 Glad to be able to help you. Link to comment Share on other sites More sharing options...
HammerUK9 Posted May 12, 2020 Author Share Posted May 12, 2020 The angles are within 1 degree and the width is within 0.2mm of what I had worked out from pictures so I'm glad you could confirm that :) Link to comment Share on other sites More sharing options...
DeadMeat Posted May 13, 2020 Share Posted May 13, 2020 Hi-jacking a bit here - K-lu, can you see what the P/N is on the ground power reset switch? Wondering if it is an 8869K10X / MS21353-851 My mods --> Mil-spec upgrades for TM Warthog, Hornet & Cougar grips | Mil-spec upgrade for TM Warthog throttle | Real Tornado gear switch modded into gear and hook lever switches Link to comment Share on other sites More sharing options...
K-lu Posted May 29, 2020 Share Posted May 29, 2020 (edited) Hi-jacking a bit here - K-lu, can you see what the P/N is on the ground power reset switch? Wondering if it is an 8869K10X / MS21353-851 Hei, Sorry for the delay. I also have to ask about the circuit breakers and throttle rails, which are illuminated in the sim. Are they illuminated in the real jet? I know the CB label panels are illuminated, I'm referring to the CB's themselves. Cheers! I was not reading right sorry. You will have answer here ;-) : https://forums.eagle.ru/showthread.php?t=210170 Edited May 29, 2020 by K-lu Link to comment Share on other sites More sharing options...
DeadMeat Posted May 29, 2020 Share Posted May 29, 2020 Thanks! My mods --> Mil-spec upgrades for TM Warthog, Hornet & Cougar grips | Mil-spec upgrade for TM Warthog throttle | Real Tornado gear switch modded into gear and hook lever switches Link to comment Share on other sites More sharing options...
HammerUK9 Posted May 29, 2020 Author Share Posted May 29, 2020 Just looked up the ET switches. I thought the catalogue ones were expensive enough - but these are around $2000 and I can't work out why :eek: Link to comment Share on other sites More sharing options...
DeadMeat Posted May 30, 2020 Share Posted May 30, 2020 Only difference I can tell between 27ET109-T and the more common 27ET61-T is that the former has integrated JANTXV diodes to avoid voltage transients when activating the coil. The rest of the specs look identical. My mods --> Mil-spec upgrades for TM Warthog, Hornet & Cougar grips | Mil-spec upgrade for TM Warthog throttle | Real Tornado gear switch modded into gear and hook lever switches Link to comment Share on other sites More sharing options...
HammerUK9 Posted May 30, 2020 Author Share Posted May 30, 2020 Ah thanks, that's what I was hoping that it was a super specific mil standard. You know your stuff to a scary detail! :worthy: Link to comment Share on other sites More sharing options...
Recommended Posts