P3CFE Posted July 3, 2020 Share Posted July 3, 2020 As soon as the skids just slightly touch the ground, there is no pedal input possible anymore. There is no reaction on the pedals input at all then. Even if you are solid on the ground and no collective..it should move a little with full rudder pedal deflection. The Physics are wrong here. This is very noticeable at the moment you lift off. Only at the moment the skids loose all contact with the ground the rudderPedal control is activated it seems. It should be much more transient. Hope it can be fixed. Regards.. Link to comment Share on other sites More sharing options...
RealDCSpilot Posted August 23, 2020 Share Posted August 23, 2020 Atm the mainrotor doesn't produce simulated air pressure for lift. The collective is just an anti-gravity lever, so the skids on ground behave magnetized as long as their collision detection says "true" for contact with ground object. As soon as you use the anti-gravity lever, it shoots the gazelle-thingy straight up and the skids say "false" for any ground contact and completely ignore that there ever was a ground object. i9 13900K @5.5GHz, Z790 Gigabyte Aorus Master, RTX4090 Waterforce, 64 GB DDR5 @5600, Pico 4, HOTAS & Rudder: all Virpil with Rhino FFB base made by VPforce, DCS: all modules Link to comment Share on other sites More sharing options...
Recommended Posts