Jump to content

UV Rheostat


golani79

Recommended Posts

  • ED Team

Rheostat shouldn't be at Max position for long time. This position for lamp ignition only. After light in on, you need turn the rheostat a bit counterclockwise or lamp will blow.

Blown lamps can be replaced by repair.

"You become responsible, forever, for what you have tamed.” ― Antoine de Saint-Exupéry, The Little Prince.
Link to comment
Share on other sites

Rheostat shouldn't be at Max position for long time. This position for lamp ignition only. After light in on, you need turn the rheostat a bit counterclockwise or lamp will blow.

Blown lamps can be replaced by repair.

 

impressive detail!

[sIGPIC][/sIGPIC]

My DCS Mods, Skins, Utilities and Scripts

 

| Windows 10 | i7-4790K | GTX 980Ti Hybrid | 32GB RAM | 3TB SSD |

| TM Warthog Stick | CH Pro Throttle + Pro Pedal | TIR5 Pro | TM MFD Cougar | Gun Camera: PrtScn |

Link to comment
Share on other sites

  • 2 weeks later...
  • 4 weeks later...

LoD !!!

 

Get the wheel blocks in place and set your turbine to something above idle...

 

The crew will refuse to take them off again unless you idle, drove me nuts till I found that out as I set for 48Volts right after starting the turbine and disconnect external power. The thing is, they disconnect external power at any power setting ( well, all that I tested, up to 6.5k taxi rpm ) but not the wheel blocks.

 

I think this is great as it adds so much to what I expect from a simulation.

Gigabyte Aorus X570S Master - Ryzen 5900X - Gskill 64GB 3200/CL14@3600/CL14 - Asus 1080ti EK-waterblock - 4x Samsung 980Pro 1TB - 1x Samsung 870 Evo 1TB - 1x SanDisc 120GB SSD - Heatkiller IV - MoRa3-360LT@9x120mm Noctua F12 - Corsair AXi-1200 - TiR5-Pro - Warthog Hotas - Saitek Combat Pedals - Asus PG278Q 27" QHD Gsync 144Hz - Corsair K70 RGB Pro - Win11 Pro/Linux - Phanteks Evolv-X 

Link to comment
Share on other sites

  • 3 years later...
  • 3 weeks later...

Yeah, how many of them i burned before I opened the manual to check on these:-)

Ryzen 7 2700X | MSI Trio 1080Ti | MSI X470 Plus Motherboard | 32GB Kingston HyperX Predator 2933 DDR4 | M.2 XPG GAMMIX S11 Pro SSD | Virpil Mongoost-50 throttle | Thrustmaster Warthog Stick | MFG Crosswind | Rift S

Link to comment
Share on other sites

  • 2 months later...

Instrument Lightning seems definitively broken with DCS 2.5.

rheostat to up to 50 %, wait for a time ( 60-90 sec ), and Nothing change. Wait for two minutes, always Nothing. Up to 100% and down 80 %, Nothing. I can see in the debrief that i haven't blow up the UV lamp.

Unable to fly at nicht

Link to comment
Share on other sites

Instrument Lightning seems definitively broken with DCS 2.5.

rheostat to up to 50 %, wait for a time ( 60-90 sec ), and Nothing change. Wait for two minutes, always Nothing. Up to 100% and down 80 %, Nothing. I can see in the debrief that i haven't blow up the UV lamp.

Unable to fly at nicht

 

Works for me in 2.5.4 stable:

 

Turning rheostat to 100%, when the white line on the panel begins to glow blue, turn down the rheostats a bit.

 

It seems the fluorescent(?) paint on the instruments needs a bit of activation time. See both screenshots, the intensity increases after some time.

 

attachment.php?attachmentid=203594&stc=1&d=1549037799

 

attachment.php?attachmentid=203595&stc=1&d=1549037799

 

edit: fixed typo

Screen_190201_142211_MiG-15_UV_1.thumb.jpg.e9e0673c496d7305215d154b7c62917a.jpg

Screen_190201_171038_MiG-15_UV2.thumb.jpg.2da5de5f606c435d19c7400e4cd19ca9.jpg


Edited by gulredrel
Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...