alonpet Posted March 6, 2018 Share Posted March 6, 2018 I also have win 7 and warthog of Trustmaster and everything works fine with 2.5 Link to comment Share on other sites More sharing options...
ArturDCS Posted March 6, 2018 Author Share Posted March 6, 2018 Thanks! So it seems to be a Windows 10 issue. I also have win 7 and warthog of Trustmaster and everything works fine with 2.5 DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
pdmarsh Posted March 6, 2018 Share Posted March 6, 2018 Thanks! So it seems to be a Windows 10 issue. Possibly. I'll try to do some testing this evening. I just finished installing Logitech and Thrustmaster Warthog drivers and DCS 2.5 on my new rig, which runs under Windows 10. Paul [sIGPIC][/sIGPIC] DCSFlightpanels - Utility for Saitek Pro Flight Panels for DCS World Custom Saitek B.I.P. Tiles for DCSFlightpanels Saitek Switch Panel Template for DCSFlightpanels Link to comment Share on other sites More sharing options...
pdmarsh Posted March 7, 2018 Share Posted March 7, 2018 I did a quick test and the Radio Panel worked as it should in DCS 2.5 in an A-10C on a PC running Windows 10 and with the Thrustmaster Warthog HOTAS running as well. Paul [sIGPIC][/sIGPIC] DCSFlightpanels - Utility for Saitek Pro Flight Panels for DCS World Custom Saitek B.I.P. Tiles for DCSFlightpanels Saitek Switch Panel Template for DCSFlightpanels Link to comment Share on other sites More sharing options...
BlackLibrary Posted March 7, 2018 Share Posted March 7, 2018 hm thats not good from my point :P i have tryed via the browser app, there i recive data https://forums.eagle.ru/showpost.php?p=3417326&postcount=5 aka WarLord DCSFlightpanels DCS-BIOS Fork DCSFlightpanels arduino-library DCSFlightpanels DCSFlightpanels-Profiles DCS FP / BIOS Discord Server Link to comment Share on other sites More sharing options...
ArturDCS Posted March 7, 2018 Author Share Posted March 7, 2018 (edited) I don't have FC3. I tried on A-10C, open/close canopy and used this : SwitchPanelKey{0SWITCHKEY_CLOSE_COWL}\o/OSKeyPress{FiftyMilliSec,RCONTROL + HOME} and it works. It doesn't help you though. It never picks up RMENU + commands When you use the RMENU button there is always an additional LCONTROL added. Delete this (feature which I can't do anything about inside coding libs) So AltGr + Home in DCS register when pressed in DCSFP as: RMENU + LCONTROL + HOMEso change it to : RMENU + HOMEand it should work. I have added the following boiler plate text to the configuration profiles: #IMPORTANT INFO REGARDING the key AltGr/RAlt (as named in DCS) or RMENU as named DCSFP #When you press AltGr DCSFP will register RMENU + LCONTROL. This is a bug which "just is". You need to modify that in the profile #by deleting the + LCONTROL part. #So for example AltGr + HOME pressed on the keyboard becomes RMENU + LCONTROL + HOME #Open text editor and delete the LCONTROL ==> RMENU + HOME So I am having a lot of troubles with the RMENU + LCONTROL bug for the switch panel thing with the gear handle. I have tried editing the textfile directly to no avail. DCSFP:s log window picks everything up fine. DCS picks up all VK_xxx strokes perfectly fine. It never picks up RMENU + commands, but it does pickup RCONTROL + VK_L, but not RCONTROL+ HOME. What I want is to bind the default key bindings for left and right engine start/stop to the rotary dial, so that it is preconfigured for all FC3 aircraft. I could change the keybind in game for every aircraft individually, but it would be such a quality of life thing to just have a single DCSFP-keyemulator profile to load up rather than rebinding every plane in detail if I need to reinstall stuff. txt-file attached. hlp plx? Edited March 7, 2018 by ArturDCS DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
Almaril Posted March 9, 2018 Share Posted March 9, 2018 When you use the RMENU button there is always an additional LCONTROL added. Delete this (feature which I can't do anything about inside coding libs) So AltGr + Home in DCS register when pressed in DCSFP as: RMENU + LCONTROL + HOMEso change it to : RMENU + HOMEand it should work. [/code] Yeah, that is what I've tried before making the post. It does not work. I am running Win10, which others seemed to have troubles with. :/ Anyways, DCSFP is a very nice piece of software, obviously I do not expect that it will work flawlessly with every imaginable combination of OS and DCS updates. I'll see if I can find an easy work around. Thanks for the answers! Link to comment Share on other sites More sharing options...
BlackLibrary Posted March 9, 2018 Share Posted March 9, 2018 @ Almaril In the attachments, i put my config for FC3 planes. It may help you. About my problem: I serarch some and think its a USB communication problem. PC <-> Panels Mid February was an Patch ( KB4074588 ) for Servicing stack(??) after that many people had problems with usb devices. At 5 March there were two fix patches but it seems not everybody is free of problems. Maybe this is the problem? aka WarLord DCSFlightpanels DCS-BIOS Fork DCSFlightpanels arduino-library DCSFlightpanels DCSFlightpanels-Profiles DCS FP / BIOS Discord Server Link to comment Share on other sites More sharing options...
ArturDCS Posted March 10, 2018 Author Share Posted March 10, 2018 (edited) Test release. SRS Supported (for FC3 pilots mainly) Logitech/Saitek PZ69 Radio Panel can now be used with SRS. Make sure to download SRS version which supports DCSFP. This is a test release that works with Simple Radio Standalone (SRS). Choose KeyEmulator_SRS for this when creating a new profile. KeyEmulator_SRS and KeyEmulator do not need DCS-BIOS. The PZ69 Radio Panel has 5 digit displays so the last cockpit digit cannot be shown. ACT/STBY toggles Guard Frequency 7 radios supported Able to control frequencies / channels Edited March 13, 2018 by ArturDCS DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
HiJack Posted March 12, 2018 Share Posted March 12, 2018 Test release. SRS Supported (for FC3 pilots mainly) Logitech/Saitek PZ69 Radio Panel can now be used with SRS. Make sure to download SRS version which supports DCSFP. This is a test release that works with Simple Radio Standalone (SRS). Choose KeyEmulator_SRS for this when creating a new profile. ACT/STBY toggles Guard Frequency 7 radios supported Able to control frequencies / channels WOW! Good job! :thumbup: Link to comment Share on other sites More sharing options...
-Demon- Posted March 13, 2018 Share Posted March 13, 2018 Hey there ArturDCS, that is a fantastic work. Many thanks. Do you think it is possible to implement the M2000C in some time? Thats my prefered model and the tiny numbers from the radio in VR is a pain in the back. Every model is supported except the M2000C. Any comment to that? Many thanks for ur awsome work!!! Cheers Demon [sIGPIC][/sIGPIC] Founder of the -=VDS=- http://www.virtual-dragon-squadron.de:pilotfly: Link to comment Share on other sites More sharing options...
ArturDCS Posted March 14, 2018 Author Share Posted March 14, 2018 Thanks! No I haven't planned at this point on doing the M2000C. Hey there ArturDCS, that is a fantastic work. Many thanks. Do you think it is possible to implement the M2000C in some time? Thats my prefered model and the tiny numbers from the radio in VR is a pain in the back. Every model is supported except the M2000C. Any comment to that? Many thanks for ur awsome work!!! Cheers Demon DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
-Demon- Posted March 14, 2018 Share Posted March 14, 2018 Thanks! No I haven't planned at this point on doing the M2000C. :crash::doh::no_sad: too sad. But I am thankfull for all the other modules!!! Keep up the great work! Thankx Demon [sIGPIC][/sIGPIC] Founder of the -=VDS=- http://www.virtual-dragon-squadron.de:pilotfly: Link to comment Share on other sites More sharing options...
ArturDCS Posted March 15, 2018 Author Share Posted March 15, 2018 I've had a discussion with pdmarsh regarding adding some new profiles to DCS-BIOS and I'll do the M2000C if I get enough donations to purchase the module. Be aware though that all airframes are different and as we have seen before some controls could not be implemented or only partially implemented. But I will do my best. :crash::doh::no_sad: too sad. But I am thankfull for all the other modules!!! Keep up the great work! Thankx Demon DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
pdmarsh Posted March 16, 2018 Share Posted March 16, 2018 I've had a discussion with pdmarsh regarding adding some new profiles to DCS-BIOS and I'll do the M2000C... While ArturDCS is working on the M2000C, I'll begin work on a DCS-BIOS profile for the Harrier. If you have the means, please do support ArturDCS with this work. I fly the modules, but his love is the software. The cost of the modules adds up. Thanks, Paul [sIGPIC][/sIGPIC] DCSFlightpanels - Utility for Saitek Pro Flight Panels for DCS World Custom Saitek B.I.P. Tiles for DCSFlightpanels Saitek Switch Panel Template for DCSFlightpanels Link to comment Share on other sites More sharing options...
Hawkeye60 Posted March 16, 2018 Share Posted March 16, 2018 I second this. I have supported him many times. Worth every penny IMHO This program is a must have for VR. Every small donation adds up very quickly! This is what brought us Starways wonderful mods. Please consider a small donation. it is very easy to do. The cost of a cup of coffee...........Is very small! :) "Yeah, and though I work in the valley of Death, I will fear no Evil. For where there is one, there is always three. I preparest my aircraft to receive the Iron that will be delivered in the presence of my enemies. Thy ALCM and JDAM they comfort me. Power was given unto the aircrew to make peace upon the world by way of the sword. And when the call went out, Behold the "Sword of Stealth". And his name was Death. And Hell followed him. For the day of wrath has come and no mercy shall be given." Link to comment Share on other sites More sharing options...
alonpet Posted March 16, 2018 Share Posted March 16, 2018 @pdmarsh On Saitek panel PZ55 something weird after the 2.5 update i noticed that 2 controls in A-10C don't work anymore . i didn't change the DCSFP command line 1. the TACAN mode selector , Command line in DCSFP: SwitchPanelDCSBIOSControl{1SWITCHKEY_LIGHTS_STROBE|TACAN on}\o/\o/DCSBIOSInput{TACAN_MODE|SET_STATE|2|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_LIGHTS_STROBE|TACAN off}\o/\o/DCSBIOSInput{TACAN_MODE|SET_STATE|0|0} The frequency dial on the Radio panel ADF mode also doesn't work anymore, for TACAN frequency. 2. SAS yaw L,R and also SAS pich L,R Command line in DCSFP: SwitchPanelDCSBIOSControl{1SWITCHKEY_PITOT_HEAT|SAS on}\o/\o/DCSBIOSInput{SASP_YAW_SAS_R|SET_STATE|1|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_PITOT_HEAT|SAS Off}\o/\o/DCSBIOSInput{SASP_YAW_SAS_L|SET_STATE|0|0} It worked before the update ,very strange . in the CTRL-REF Page also it doesn't move the integer. Can you look into it? Thanks Link to comment Share on other sites More sharing options...
ArturDCS Posted March 17, 2018 Author Share Posted March 17, 2018 Does DCSFP error log have any info? Close DCS, delete all under C:\Users\<user>\Saved Games\DCS\Logs . After a mission do you see any errors relating to this? @pdmarsh On Saitek panel PZ55 something weird after the 2.5 update i noticed that 2 controls in A-10C don't work anymore . i didn't change the DCSFP command line 1. the TACAN mode selector , Command line in DCSFP: SwitchPanelDCSBIOSControl{1SWITCHKEY_LIGHTS_STROBE|TACAN on}\o/\o/DCSBIOSInput{TACAN_MODE|SET_STATE|2|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_LIGHTS_STROBE|TACAN off}\o/\o/DCSBIOSInput{TACAN_MODE|SET_STATE|0|0} The frequency dial on the Radio panel ADF mode also doesn't work anymore, for TACAN frequency. 2. SAS yaw L,R and also SAS pich L,R Command line in DCSFP: SwitchPanelDCSBIOSControl{1SWITCHKEY_PITOT_HEAT|SAS on}\o/\o/DCSBIOSInput{SASP_YAW_SAS_R|SET_STATE|1|0} SwitchPanelDCSBIOSControl{0SWITCHKEY_PITOT_HEAT|SAS Off}\o/\o/DCSBIOSInput{SASP_YAW_SAS_L|SET_STATE|0|0} It worked before the update ,very strange . in the CTRL-REF Page also it doesn't move the integer. Can you look into it? Thanks DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
BlackLibrary Posted March 17, 2018 Share Posted March 17, 2018 (edited) Hi im back :P after i install windows new, i have connection to DCSBios (turning gear). But the radio Panel goes cracy when i hit the white button. And the multi panel shows nothing in the LCD (Alt+Heading = 0) Video (Radio Panel): https://www.dropbox.com/s/lp4yjve8rkbh1gm/20180313_190036.mp4?dl=0 And my error log Edited March 17, 2018 by BlackLibrary aka WarLord DCSFlightpanels DCS-BIOS Fork DCSFlightpanels arduino-library DCSFlightpanels DCSFlightpanels-Profiles DCS FP / BIOS Discord Server Link to comment Share on other sites More sharing options...
ArturDCS Posted March 17, 2018 Author Share Posted March 17, 2018 OK, I can see that DCSFP fails to convert a text received from DCS-BIOS to number format. Hmm.. How do I replicate this? Can you do the same test and have debug turned on & debug to file? Hi im back :P after i install windows new, i have connection to DCSBios (turning gear). But the radio Panel goes cracy when i hit the white button. And the multi panel shows nothing in the LCD (Alt+Heading = 0) Video (Radio Panel): https://www.dropbox.com/s/lp4yjve8rkbh1gm/20180313_190036.mp4?dl=0 And my error log DCSFlightpanels dcs-insight dcs-bios DCSBIOSBridge BIOSBuddy Link to comment Share on other sites More sharing options...
alonpet Posted March 18, 2018 Share Posted March 18, 2018 Does DCSFP error log have any info? Close DCS, delete all under C:\Users\<user>\Saved Games\DCS\Logs . After a mission do you see any errors relating to this? ok i will check , tanks Link to comment Share on other sites More sharing options...
pdmarsh Posted March 18, 2018 Share Posted March 18, 2018 @pdmarsh On Saitek panel PZ55 something weird after the 2.5 update i noticed that 2 controls in A-10C don't work anymore... Can you look into it? Thanks Sorry for not responding sooner. I'm afraid that I was not able to reproduce the problems you are seeing. Hopefully, the log files you are providing to ArturDCS will help get to the root of the problems. Paul [sIGPIC][/sIGPIC] DCSFlightpanels - Utility for Saitek Pro Flight Panels for DCS World Custom Saitek B.I.P. Tiles for DCSFlightpanels Saitek Switch Panel Template for DCSFlightpanels Link to comment Share on other sites More sharing options...
og_wolf Posted March 18, 2018 Share Posted March 18, 2018 Hi! I recently bought few saitek panels and today I started to play with DCSFP. It's a bit overwhelming at start to configure everything from scrach. Are there any preconfigured profiles somewhere? Looking especially for P-51D. Link to comment Share on other sites More sharing options...
alonpet Posted March 19, 2018 Share Posted March 19, 2018 Does DCSFP error log have any info? Close DCS, delete all under C:\Users\<user>\Saved Games\DCS\Logs . After a mission do you see any errors relating to this? absolutely no any entry in DCS.log, DCS-bios.log Link to comment Share on other sites More sharing options...
pdmarsh Posted March 19, 2018 Share Posted March 19, 2018 Hi! I recently bought few saitek panels and today I started to play with DCSFP. It's a bit overwhelming at start to configure everything from scrach. Are there any preconfigured profiles somewhere? Looking especially for P-51D. HI og_wolf, I have attached my P-51D profile. You will have to change the hardware IDs in a text editor to match your own panel ID numbers. I don't recall how well I labeled each configuration, but there should be some indication of what button or switch does what. Let me know of any questions. Thanks, PaulP-51D.zip [sIGPIC][/sIGPIC] DCSFlightpanels - Utility for Saitek Pro Flight Panels for DCS World Custom Saitek B.I.P. Tiles for DCSFlightpanels Saitek Switch Panel Template for DCSFlightpanels Link to comment Share on other sites More sharing options...
Recommended Posts