Rainmaker Posted April 17, 2019 Share Posted April 17, 2019 I initially thought the same, that they dont change. Then I realized that they didnt change either in wags video. Must be WIP. Correct, they have to be changed manually currently...the programs will not individually identify to the stations. I.E. you have to manually reselect the program you want at the time of release. If you have more than one quatity boxed, they will drop simultaneously and only for one program instead of the independent programs you identify when you are setting them up. As it sits, there really isn’t a quantity release unless you want them to all drop on the same DMPI. @Nineline. I haven’t forgot about the track request, I just haven’t flown since that was posted. Link to comment Share on other sites More sharing options...
Gierasimov Posted April 17, 2019 Share Posted April 17, 2019 In video... I initially thought the same, that they dont change. Then I realized that they didnt change either in wags video. Must be WIP. No, in video stations change initially when Wags is setting up PPIs but don't change when he goes through them later. For me no change whatsoever. Also, same settings and drop parameters - speed and altitude, give different results between JDAM types - normal vs. penetrator warhead. I will stay away from JDAM as it is clearly WIP Intel i7-13700KF :: ROG STRIX Z790-A GAMING WIFI D4 :: Corsair Vengeance LPX 64GB :: MSI RTX 4080 Gaming X Trio :: VKB Gunfighter MK.III MCG Ultimate :: VPC MongoosT-50 CM3 :: non-VR :: single player :: open beta Link to comment Share on other sites More sharing options...
emibat Posted April 18, 2019 Share Posted April 18, 2019 drop a JDAM to a high altitude target. Hi dudes, I've tried to hit a big building placed in Kerman area (Iran), about 5750 feet of altitude, but the bomb wrong totally the target. Flight level about 25K. (QFE at 29.92) GBU-31. I used the right coordinate format DD°MM'SS.ss''. I've tried in feet and also in meters, but nothing has changed. Than I used the same configuration to a target at sea level and everything it's ok. Any idea? Cheers [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
_mu110_ Posted April 18, 2019 Share Posted April 18, 2019 Make sure that you’re definitely within the release zone for the JDAM, the indicator on the HSI is currently bugged, and maybe trying to target something at a high altitude is exacerbating the issue. Check out my skins and mods on the User Files. Link to comment Share on other sites More sharing options...
kengou Posted April 19, 2019 Share Posted April 19, 2019 I used some JDAMs on a quick mission using TOO mode, and edited waypoints to be directly over the targets I wanted to hit. I only used the coordinates and elevation I got from the F10 map input directly into the UFC. As long as I didn't release at max range or anything I got bang-on direct hits. Seems good to me. Virpil WarBRD | Thrustmaster Hornet Grip | Foxx Mount | Thrustmaster TWCS Throttle | Logitech G Throttle Quadrant | VKB T-Rudder IV | TrackIR 5 AMD Ryzen 5 3600 | Nvidia GTX 1060 6GB | 32GB DDR4 3200 | SSD Link to comment Share on other sites More sharing options...
Jackil Posted April 20, 2019 Share Posted April 20, 2019 Mine crashes also upon GBU-38 release. Rig: i7-7700K, ASUS Strix Z270E mb, EVGA 1080GTX, 16GB DDR4 3000, Samsung 960 EVO M2.1 TB SSD, Corsair Hydro Cooler H115i, Win 10 64 Link to comment Share on other sites More sharing options...
MarcosPrt Posted April 21, 2019 Share Posted April 21, 2019 Hey, i have a problem, when i throw the bombs whit JDAM [in MULTIPLAYER and SINGLEPLAYER] (GBU-31(V)3/B , GBU 31 and GBU-38 ) the game crash, i dont know why this happend, i follow the same process than Matt Wagner, my mate, and i´m sure than the selected QTY station and the selected wingform selected station match, i tried all the possibilities to throw the bomb, and the strangest thing it´s than when i trhow the bomb it´s to random, sometimes dont crash and sometimes yes. Lo importante no es la caida, es el aterizaje Link to comment Share on other sites More sharing options...
delevero Posted April 21, 2019 Share Posted April 21, 2019 try to enter Meters instead of feet when you program the bombs. I never had a problem when i used meters. Link to comment Share on other sites More sharing options...
[SFS]JDAM Posted April 21, 2019 Share Posted April 21, 2019 Hi, I think I'm not the only one to have DCS freeze when I press the button to drop the JDAM. both solo and multiplayer. I hope this problem will be solved in the next update. Thank you. Link to comment Share on other sites More sharing options...
[SFS]JDAM Posted April 21, 2019 Share Posted April 21, 2019 Many thanks Hornetmadd for the tip, it's great it works. Link to comment Share on other sites More sharing options...
rob10 Posted April 22, 2019 Share Posted April 22, 2019 Hi, I hope this problem will be solved in the next update. Thank you. Since the title of this thread includes [FREEZE FIXED INTERNALLY] (which means that they have it fixed in the code they are currently working on, but has not been release publicly, including to the beta) there is a high likelihood that will be fixed in the next update. Link to comment Share on other sites More sharing options...
jackdaw Posted April 22, 2019 Share Posted April 22, 2019 Game crashes when using GBU-31, 38, 31V/3. Have to use task manager to shut down DCS as it is not responding, this is in single player using the ready on ramp mission. Link to comment Share on other sites More sharing options...
discwalker Posted April 22, 2019 Share Posted April 22, 2019 I hope in the future Align Quality will be not reseted by Maverick mode OR ENTERING AGAIN a/g mode. GTX 1070 8GB, 16GB DDR3, W8.1 on SSD, DCS on another SSD Link to comment Share on other sites More sharing options...
backspace340 Posted April 23, 2019 Share Posted April 23, 2019 I hope in the future Align Quality will be not reseted by Maverick mode OR ENTERING AGAIN a/g mode. Think that's how it is in real life, I wouldn't expect it to change. Link to comment Share on other sites More sharing options...
Harker Posted April 23, 2019 Share Posted April 23, 2019 Think that's how it is in real life, I wouldn't expect it to change. Really? Can you give a source? If find that odd, in my opinion. What would be the reason to lose alignment? Maybe if the initial alignment was done a while ago and has degraded with time, but the way I see it, there isn't another technological reason for the alignment to be lost once initiated. Is power completely cut off from the JDAM's electronics once you select anything else? The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
backspace340 Posted April 24, 2019 Share Posted April 24, 2019 Really? Can you give a source? If find that odd, in my opinion. What would be the reason to lose alignment? Maybe if the initial alignment was done a while ago and has degraded with time, but the way I see it, there isn't another technological reason for the alignment to be lost once initiated. Is power completely cut off from the JDAM's electronics once you select anything else? Can't give a source as it's against forum rules. It's also modelled this way in another game that models a Super Hornet with the same avionics as our Hornet - looks like power is cut off whenever you select anything else, which is why the full re-alignment is needed. Link to comment Share on other sites More sharing options...
drPhibes Posted April 24, 2019 Share Posted April 24, 2019 Really? Can you give a source? If find that odd, in my opinion. What would be the reason to lose alignment? Maybe if the initial alignment was done a while ago and has degraded with time, but the way I see it, there isn't another technological reason for the alignment to be lost once initiated. Is power completely cut off from the JDAM's electronics once you select anything else? Unboxing a JDAM in the stores page cuts all power, and since it doesn't have any static memory for storing GPS and INS parameters, a full transfer alignment must be performed when re-selecting the JDAM. Storing this data in non-volatile memory is a bad idea for a few reasons: 1. INS data would be completely unusable after a short time unless you are flying straight and level at at constant velocity. If the alignment quality is insufficient you will need to perform a full JDAM transfer alignment to rectify this. 2. Storing the keys for the P(y) GPS signal in a form where they may theoretically be recovered from UXO or fragments of the guidance unit is most likely something that the US DoD isn't particularly fond of. Link to comment Share on other sites More sharing options...
kaoqumba Posted April 24, 2019 Share Posted April 24, 2019 JDAM does not explode Link to comment Share on other sites More sharing options...
PitbullVicious Posted April 24, 2019 Share Posted April 24, 2019 JDAM does not explode Did you set EFUZ to INST? Worked OK for me, once I did that. i9-9900K @ 5.1GHz | MSI Ventus 3X OC RTX3090 24GB | 64GB 3200MHz DDR4 | Asus ROG Strix Z390-E | Asus Xonar DGX 5.1 Sound Card | Virpil T50CM2 base w/ F/A-18C / A-10C / Virpil T50CM2 Grip | WinWing Super Taurus Throttle | MFG pedals | TekCreations Hornet UFC, Landing Panel, Right Console | WinWing Hornet Combat Ready Panel | Buddy Fox UFC | Foxx Mount | 3 x TM Cougar MFD | HP Reverb G2 | Wacom Intuos S (with VRK) | Honeycomb Alpha Yoke | Thrustmaster Warthog HOTAS | CH Fighter Stick Pro & Throttle | MS Sidewinder 2 FFB | Track IR 5 | Oculus Rift CV1 善く戦う者は、まず勝つべからざるを為して、以て敵の勝つべきを待つ。 Link to comment Share on other sites More sharing options...
ac5 Posted April 24, 2019 Share Posted April 24, 2019 DCS crash to desktop when using F-18 CBU's DCS crash to desktop when using F-18 CBU's. Has happened in the training mission and with a miz of my own. ED, Please advise. LOG includeddcs.log-20190424-155634 (2).zip Mainboard: ASUS Maximus X Hero Intel Z 370 CPU: Intel Core i7-8086K @ 4.0 GHz Memory: 32GB Corsair Dominator Platinum DDR4-3000 Graphics Card: ASUS NVIDIA GeForce RTX 3080 10GB Monitor ASUS PA 329 32" @ 4K 1 SSD Samsung 860 PRO 256 GB 1 SSD Samsung 860 PRO 4 TB Windows 10 - 64 V. 2004 CH Pro combatstick, throttle and pedals Link to comment Share on other sites More sharing options...
Rescue Posted April 24, 2019 Share Posted April 24, 2019 https://forums.eagle.ru/showthread.php?t=238556 Link to comment Share on other sites More sharing options...
discwalker Posted April 24, 2019 Share Posted April 24, 2019 "JDAM accuracy increased." how? ME and F10 map still display lat-long in DDMMSS. Don't say I need to use converted lat-long decimal from DD MM.SSS. GTX 1070 8GB, 16GB DDR3, W8.1 on SSD, DCS on another SSD Link to comment Share on other sites More sharing options...
ac5 Posted April 24, 2019 Share Posted April 24, 2019 https://forums.eagle.ru/showthread.php?t=238556 Thanks, but I am on the DCS stable version. Mainboard: ASUS Maximus X Hero Intel Z 370 CPU: Intel Core i7-8086K @ 4.0 GHz Memory: 32GB Corsair Dominator Platinum DDR4-3000 Graphics Card: ASUS NVIDIA GeForce RTX 3080 10GB Monitor ASUS PA 329 32" @ 4K 1 SSD Samsung 860 PRO 256 GB 1 SSD Samsung 860 PRO 4 TB Windows 10 - 64 V. 2004 CH Pro combatstick, throttle and pedals Link to comment Share on other sites More sharing options...
Harker Posted April 25, 2019 Share Posted April 25, 2019 Don't worry, I saw your name . Also me, I've been on DCS for years and the Hornet is the first aircraft I'm so invested in. Mavericks don't have INS, but still require to be boresighted to the aircraft. Otherwise, you can point the seeker somewhere and the triangle on the HUD might point somewhere else, or if you slave the seeker to a TGT point, it might not point exactly there. That can happen if the seeker is not aligned or boresighted. AFAIK, this is part of what happens in those 3 minutes, not just the cooling. I might be wrong though, I'd like for someone with actual experience to confirm or deny this, maybe in a PM. Anyway, when you step away from the MAV in the Stores page, you don't have to wait for anything to use it again, even if you left the seeker uncaged, you'll find it waiting for you the way you left it, ready to go, instantly. Which indicates to me that power is not cut. Unless my said alignment is not happening and it's simply a camera feed. As for the terrain elevation map, I think it's going to come later. The INS is pretty much a placeholder at this point, it doesn't even require proper alignment. The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
Krag6 Posted April 25, 2019 Share Posted April 25, 2019 GBU-31 Multiplayer Pickle Crash To Desktop Gbu-31 is warmed up, fuze set to instant. As soon as I'm in range, pickle, crash to desktop with no error message. Log attached.dcs.rar Link to comment Share on other sites More sharing options...
Recommended Posts