Ranger79 Base Objects Pack (Hesco's + others)

UPDATED 04/27/2016 (Confirmed working in newest DCS Versions)

For your mission building enjoyment, I present to you Ranger79's Mod Pack:

(Version 2.4.1).

Bugs:

- Some vehicles driver views cannot be used due window material issue.

- Many of the vehicles are not made for CA, but rather to enhance mission builders with a different variation. Please do not ask for driver views, etc if a vehicle is not driveable.

Changes:

Added the Chassis definitions directly in the unit LUA, this removes the dependency on DB_Units_Cars.lua

Removed the Chassis folder and DB_unists_Cars.lua file

Removed Duplicate Sound Files that are already defined by default install of DCS

*Reduced the number of files in the mod to maintenance and changes distinguishable from DCS files

*Removed the _Backup copies of units these have been there a while and we have not needed them, standard maintenance cleanup

JSGME Version for latest DCS Versions as of 4/27/2016 Download Link HERE

(Units located under "Fortifications" unless otherwise specified)

Easily make templates and save for future use!

2.4 includes:

-Static C5 Aircraft

-Patrol HMMV with and without red emergency lights

-OshKosh ATV (CA ready) created by Lilkiki

-Oshkosh MTVR Mk23 (CA ready) created by Lilkiki

-Air Force One Static

• Ammo Crate Pallet
  
• Armored Security Vehicle (Black and Desert)**
  
• Barbwire (8m & 25m)
  
• Barracks Long
  
• Concrete Jersey Barrier
  
• Concrete Wall (various lengths)
  
• Construction Barrier
  
• Fudges Conc Barricade X20
  
• Fudges Conc Barricade X10
  
• Fudges Conc Barricade X3
  
• Fudges Conc Barricade X5
  
• Generator
  
• Green GPM Tent
  
• Green Living Trailer
  
• Hesco Barriers (17m,35m,52m) Single Wide
  
• Hesco Barriers (17m,35m,52m,260m) Double Wide
  
• Insurgent Manpad Unit (located under Air Defense)
  
• Large Tan Tent
  
• Life Raft (located under Ships)
  
• Medium Trailer Facility
  
• Nato 50cal Tower**
  
• Nitrogen Cart
  
• Porta Jon (Blue)
  
• Porta Jon (Green)
  
• Restricted Area Sign
  
• RG31 Mk5 (OD and Desert)** (Created by Stiltman and ExA)
  
• Semi Truck (Blue and Red) (located under Unarmed)
  
• Small Crates
  
• Small Living Trailer
  
• Speed Limit Sign
  
• Stair Ladder A/C
  
• Static Insurgent 12.7mm (DFP and non-DFP versions)**
  
• Storage Hangar Long
  
• Tan Tent 2
  
• Tan Tent 3
  
• Tan Tent 4
  
• Technical 12.7mm (small and large truck versions)**
  
• Traffic Cone
  
• Trash Dumpster
  
• Tree
  
• Windmill (working) (located under Air Defense)
  

** - located under Armor

More pics: HERE

Location / How to Place Units in Mission Editor:

Hope this helps:

The location of all units is under the "Add or Modify Ground Vehicle Group" icon (tank)

Select the icon, choose your faction and go to "Fortifications" for most objects, vehicles are located under "Armor" and "Unarmed." Insurgent Manpad & Windmill are located under "Air Defence"

Place your unit

Very nice!

Yes, very nice indeed.

Looks good, thanks for your effort

Good job! Makes for a more realistic environment.

great work! thanks for sharing! :thumbup:

Thanks for your work and sharing! :thumbup:

thanks for sharing

Great objects for mission design there Ranger! Should be in ED's package so all players got them :thumbup:

WOW Super work, I really love your elements and it's perfect for our airbase who are like a desert, now it's perfect...

A great great thanks for this sharing !!!

Thank you :)

Hello dear Ranger79,

I have one problem to see your elements, in my mission editor I can watch all your elements but when I'm in my simulation I can't see your elements...

In my folder "Tech" I have already three Mods who work fine:

#1: FudgesFortifications

#2: Mods_tech_Helipads

#3: Mi-8_Static_1.2.6

Each Mod is inside one folder but about your Mod I don't know how installed your Mod.

If I put Shapes folder, Textures folder and buildings.lua in my Mod folder I can just watch your Mods in my missons editor but not in my simulation...

And please can you tell me if I must installed this file: addon.lma3, if it's the case where I can installed this file ?

A great great thanks in advance for your help, Skull.

Hello dear Ranger79,

 

I have one problem to see your elements, in my mission editor I can watch all your elements but when I'm in my simulation I can't see your elements...

 

In my folder "Tech" I have already three Mods who work fine:

#1: FudgesFortifications

#2: Mods_tech_Helipads

#3: Mi-8_Static_1.2.6

 

Each Mod is inside one folder but about your Mod I don't know how installed your Mod.

If I put Shapes folder, Textures folder and buildings.lua in my Mod folder I can just watch your Mods in my missons editor but not in my simulation...

 

And please can you tell me if I must installed this file: addon.lma3, if it's the case where I can installed this file ?

 

A great great thanks in advance for your help, Skull.

Use modman to install, may be conflicting with your other mods. The addon.lma3 file is a modman file only. Check the building lua for fudges mods against my lua if the "CXXXX" prefix are the same that might be causing your issue. If Fudge would allow I would add to my pack, or I can make simiar objects.

Great objects for mission design there Ranger! Should be in ED's package so all players got them :thumbup:

+1

CAN'T DOWNLOAD..CHECK LINK PLZ...

THNX RANGER FOR YOUR WORK...

CAN'T DOWNLOAD..CHECK LINK PLZ...

 

THNX RANGER FOR YOUR WORK...

Works fine here, downloading this very second.

Hello Ranger79,

In first I would like to thank you for your answer, I remove all my Mods and I've just installed your Mod but if I can watch your elements in my missons editor, in my simulation I can't see your Mod...

Here one screenshot of my Mission Editor who you can see your elements in my DSC:

I must used Modman for installed your Mod ?

With a simple drag and drop it's not possible ?

A great thanks for all, Skull.

Hello Ranger79,

 

In first I would like to thank you for your answer, I remove all my Mods and I've just installed your Mod but if I can watch your elements in my missons editor, in my simulation I can't see your Mod...

 

Here one screenshot of my Mission Editor who you can see your elements in my DSC:

 

 

I must used Modman for installed your Mod ?

With a simple drag and drop it's not possible ?

 

A great thanks for all, Skull.

Yeah its a modman install. Manual install at your own risk, I would refrain from that if possible.

New Objects...nicely done :thumbup:

Hello Ranger79,

 

In first I would like to thank you for your answer, I remove all my Mods and I've just installed your Mod but if I can watch your elements in my missons editor, in my simulation I can't see your Mod...

 

Here one screenshot of my Mission Editor who you can see your elements in my DSC:

 

 

I must used Modman for installed your Mod ?

With a simple drag and drop it's not possible ?

 

A great thanks for all, Skull.

I can't see your screenshot on my phone, can you provide a direct link.

EDIT:

I can't see your screenshot on my phone, can you provide a direct link.

Yes the "CXXXX" prefix are the same that FudgesFortifications Mod:

Yours:

CWTF = {};

set_recursive_metatable(CWTF, GT_t.generic_stationary)

set_recursive_metatable(CWTF.chassis, GT_t.CH_t.STATIC);

CWTF.chassis.life = 0

 

CWTF.visual.shape = "hesco_db_35m.EDM"

CWTF.visual.shape_dstr = "hesco_db_35m.EDM"

 

--Burning after hit

CWTF.visual.fire_size = 0 --relative burning size

CWTF.visual.fire_pos = {0,0,0};

CWTF.visual.fire_time = 0 --burning time (seconds)

CWTF.time_agony = 180;

 

CWTF.Name = "hesco_db_35m"

CWTF.DisplayName = _("Hesco Double X35")

CWTF.Rate = 1

 

CWTF.DetectionRange = 0;

CWTF.ThreatRange = 0;

CWTF.mapclasskey = "P0091000076";

CWTF.attribute = {wsType_Ground,wsType_Tank,wsType_NoWeapon,wsTypeVAZ,

};

CWTF.category = "Fortification";

 

add_surface_unit(CWTF)

CWTF = {};

set_recursive_metatable(CWTF, GT_t.generic_stationary)

set_recursive_metatable(CWTF.chassis, GT_t.CH_t.STATIC);

CWTF.chassis.life = 0

 

CWTF.visual.shape = "Conc_Bar_tall_x5.EDM"

CWTF.visual.shape_dstr = "Conc_Bar_tall_x5.EDM"

 

--Burning after hit

CWTF.visual.fire_size = 0 --relative burning size

CWTF.visual.fire_pos = {0,0,0};

CWTF.visual.fire_time = 0 --burning time (seconds)

CWTF.time_agony = 180;

 

CWTF.Name = "Conc_Bar_tall_x5"

CWTF.DisplayName = _("Concrete Barricade Tall X5")

CWTF.Rate = 1

 

CWTF.DetectionRange = 0;

CWTF.ThreatRange = 0;

CWTF.mapclasskey = "P0091000076";

CWTF.attribute = {wsType_Ground,wsType_Tank,wsType_NoWeapon,wsTypeVAZ,

};

CWTF.category = "Fortification";

 

add_surface_unit(CWTF)

But I well understand all my Mod but always the same problem, please can you tell me the good version of your Modman and if it's possible the link for the good Modman ?

Thanks again, Skull

EDIT:

 

Link: http://www.flickr.com/photos/37090034@N03/13105240304/sizes/o/in/photostream/

 

 

Yes the "CXXXX" prefix are the same that FudgesFortifications Mod:

 

Yours:

 

And FudgesFortifications Mod:

 

 

 

But I well understand all my Mod but always the same problem, please can you tell me the good version of your Modman and if it's possible the link for the good Modman ?

 

 

Thanks again, Skull

I can fix tonight, very easy, you can try if you like to use notepad++ and replace the CXXXX prefix with something like CWAAA and use that sequence for the other objects with conflicts in my lua.

I can fix tonight, very easy, you can try if you like to use notepad++ and replace the CXXXX prefix with something like CWAAA and use that sequence for the other objects with conflicts in my lua.

Hello again,

Please can you give me the link for download the same Modman like you ?

Thanks again, Skull.

Hello again,

 

Please can you give me the link for download the same Modman like you ?

 

Thanks again, Skull.

I use 7.3 from Lock On files dot com