Pman Posted May 13, 2015 Share Posted May 13, 2015 Standard operating for a go around, see the gear going back up? Pilot obviously didnt like something and decided to go around Pman Link to comment
kontiuka Posted May 13, 2015 Share Posted May 13, 2015 Standard operating for a go around, see the gear going back up? Pilot obviously didnt like something and decided to go around PmanWhy is it stand-op to have 1 engine in burner? Link to comment
shagrat Posted May 13, 2015 Share Posted May 13, 2015 May be that was the "something" he didn't like? :D Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore) Link to comment
Eddie Posted May 13, 2015 Share Posted May 13, 2015 It isn't. Nothing "standard" about that really, it's a practice single engine go around, most likely an OCU trainee. Normally go arounds require neither reheat or gear retraction when remaining in the pattern. Spoiler Intel 13900K (5Ghz), 64Gb 6400Mhz, MSi RTX 3090, Schiit Modi/Magi DAC/AMP, ASUS PG43UQ, Hotas Warthog, RealSimulator FSSB3, 2x TM MFDs + DCS MFDs, MFG Crosswinds, Elgato Steamdeck XL Link to comment
Spectre11 Posted May 13, 2015 Share Posted May 13, 2015 Or he simply made a normal touch and go for practise. L/H is at max dry or close, probably reheat followed just moments later. Link to comment
Python Posted May 13, 2015 Share Posted May 13, 2015 It was posted with this description... "Asymmetric approach. Burner on too early." It's a nice photo at any rate. [sIGPIC][/sIGPIC] Link to comment
SilentGun Posted May 14, 2015 Share Posted May 14, 2015 Because the original mesh was for LockOn FC2 and ported to DCS and not good enough quality in our eyes. With DCS2 we can achieve much more with the graphics quality and therefore the model needs to be up to the job, especially with VR systems like the Rift. Yes cockpit is being completely remodelled also. Thanks, Chris. Just a quick question. Are the shots from last year for the typhoon you guys are currently working on or is it an older model your talking about. Link to my Imgur screenshots and motto http://imgur.com/a/Gt7dF One day in DCS... Vipers will fly along side Tomcats... Bugs with Superbugs, Tiffy's with Tornado's, Fulcrums with Flankers and Mirage with Rafales... :)The Future of DCS is a bright one:) Link to comment
Ells228 Posted May 14, 2015 Author Share Posted May 14, 2015 That's the older model. No shots of the new model have been shown yet. Link to comment
Neor Posted May 14, 2015 Share Posted May 14, 2015 Do have somthing what you can show us? Just a wireframe would be enough, or some details. I would love to see something. Link to comment
Ells228 Posted May 14, 2015 Author Share Posted May 14, 2015 This one needs to stay under wraps for a little while longer, sorry ;) Link to comment
outlawal2 Posted May 15, 2015 Share Posted May 15, 2015 This one needs to stay under wraps for a little while longer, sorry ;) That has all the sounds of "We're waiting on EDGE to REALLY showoff the new model" Totally my own guess mind you, but that is also encouraging as they wouldn't delay at this point unless EDGE was somewhere near release... Here's hoping! "Pride is a poor substitute for intelligence." RAMBO Link to comment
Neor Posted May 15, 2015 Share Posted May 15, 2015 This one needs to stay under wraps for a little while longer, sorry ;) I think a have to cry now :cry: What do you think for how long? Link to comment
komemiute Posted June 11, 2015 Share Posted June 11, 2015 Despite having MANY DCS modules the Typhoon is going to be Day one buy. Also probably the only module in which I can really perform, without even glancing at the manual cover! :D Go VEAO! PS: I'd still need the time to make a TARGET profile to convert the TM Warthog into the Typhoon HOTAS... :/ Link to comment
shagrat Posted June 11, 2015 Share Posted June 11, 2015 PS: I'd still need the time to make a TARGET profile to convert the TM Warthog into the Typhoon HOTAS... :/ Which you will immediately share with the community before even starting the engines, of course! :D Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore) Link to comment
komemiute Posted June 11, 2015 Share Posted June 11, 2015 HAHAHAHAH Why not- To be honest I started already, it's just that as long as I don't know what command are available I can't go too far... Link to comment
SilentGun Posted June 11, 2015 Share Posted June 11, 2015 (edited) hey Ells, its summer, you promised us something :) Edited June 12, 2015 by SilentGun Link to my Imgur screenshots and motto http://imgur.com/a/Gt7dF One day in DCS... Vipers will fly along side Tomcats... Bugs with Superbugs, Tiffy's with Tornado's, Fulcrums with Flankers and Mirage with Rafales... :)The Future of DCS is a bright one:) Link to comment
Valium Posted June 11, 2015 Share Posted June 11, 2015 Click here to see more pictures of Polish Air Force! Check also my album. Link to comment
Ells228 Posted June 12, 2015 Author Share Posted June 12, 2015 hey Ells, its summer, you promised us something :) With the rain pouring down outside my window right now I'd have to disagree that it's summer...well ok maybe a British summer it is lol I'm just waiting to get the new external model form the mesh artist then I can do some renders. He's sent me some but they are basic Maya ones and not looking that pretty for the skill he's used in the model which is outstanding. Link to comment
Python Posted June 12, 2015 Share Posted June 12, 2015 With the rain pouring down outside my window right now I'd have to disagree that it's summer...well ok maybe a British summer it is lol I'm just waiting to get the new external model form the mesh artist then I can do some renders. He's sent me some but they are basic Maya ones and not looking that pretty for the skill he's used in the model which is outstanding. It's glorious up here today, feels more like Spain! Still, surely the rain down there means more work gets done... And that is good for us lot. :thumbup: OT, but any news on whether the Tucano is confirmed or not yet? It gets lost beneath the Typhoon talk of course but I'm excited for it none the less. [sIGPIC][/sIGPIC] Link to comment
Ells228 Posted June 12, 2015 Author Share Posted June 12, 2015 Well yes I guess this is true, although I'm currently doing financial sheets for the P-40 ready to go on pre-sale ;) Tuc is still on the list but been bumped down due to Tiffy work, sorry. Link to comment
Python Posted June 12, 2015 Share Posted June 12, 2015 Don't apologise for making a Typhoon lol. At least we will see it eventually. I guess it will take a long time to model all of those different sized Tucano airframes anyway ;) [sIGPIC][/sIGPIC] Link to comment
Valium Posted June 12, 2015 Share Posted June 12, 2015 Click here to see more pictures of Polish Air Force! Check also my album. Link to comment
golani79 Posted June 12, 2015 Share Posted June 12, 2015 Well yes I guess this is true, although I'm currently doing financial sheets for the P-40 ready to go on pre-sale ;) Can you roughly give an ETA? :D >> DCS liveries by golani79 << Link to comment
ED Team NineLine Posted June 12, 2015 ED Team Share Posted June 12, 2015 Can you roughly give an ETA? :D I think that is a rough ETA ;) Forum Rules • My YouTube • My Discord - NineLine#0440• **How to Report a Bug** Link to comment
shagrat Posted June 12, 2015 Share Posted June 12, 2015 With the rain pouring down outside my window right now I'd have to disagree that it's summer...well ok maybe a British summer. He says: "summer is coming" - She: "Yep, rain feels warmer!" Shagrat - Flying Sims since 1984 - Win 10 | i5 10600K@4.1GHz | 64GB | GeForce RTX 3090 - Asus VG34VQL1B | TrackIR5 | Simshaker & Jetseat | VPForce Rhino Base & VIRPIL T50 CM2 Stick on 200mm curved extension | VIRPIL T50 CM2 Throttle | VPC Rotor TCS Plus/Apache64 Grip | MFG Crosswind Rudder Pedals | WW Top Gun MIP | a hand made AHCP | 2x Elgato StreamDeck (Buttons galore) Link to comment
Recommended Posts