flynavy154 Posted July 10, 2016 Share Posted July 10, 2016 I feel certain this is likely a problem with my rudder pedals or their settings and not the module, but in the L-39 I'm experiencing sudden uncommanded rudder inputs. For example, I can be in a left standard-bank turn with some slight left rudder applied and suddenly the rudder will snap to the full right position obviously causing a violent yaw and then oscillation while recovering. Any thoughts? Link to comment Share on other sites More sharing options...
msalama Posted July 10, 2016 Share Posted July 10, 2016 Spiky controller pot(s)? Two controllers inadvertently bound to the rudder? The DCS Mi-8MTV2. The best aviational BBW experience you could ever dream of. Link to comment Share on other sites More sharing options...
NeilWillis Posted July 10, 2016 Share Posted July 10, 2016 Also, check you don't have duplicated inputs in the control settings. By default, you will see multiple inputs, and you'll need to go into the settings and delete all the unwanted ones. You have tio do that for every new module installed. Link to comment Share on other sites More sharing options...
Boris Posted February 13, 2017 Share Posted February 13, 2017 Sorry to dig this up, but I'm having the very same issue. The L-39 will yaw abruptly, seemingly at random, in normal, even straight and level flight. I'm certain it has nothing to do with the controllers as this is not an issue in any other module. PC Specs / Hardware: MSI z370 Gaming Plus Mainboard, Intel 8700k @ 5GHz, MSI Sea Hawk 2080 Ti @ 2100MHz, 32GB 3200 MHz DDR4 RAM Displays: Philips BDM4065UC 60Hz 4K UHD Screen, Pimax 8KX Controllers / Peripherals: VPC MongoosT-50, Thrustmaster Warthog HOTAS, modded MS FFB2/CH Combatstick, MFG Crosswind Pedals, Gametrix JetSeat OS: Windows 10 Home Creator's Update Link to comment Share on other sites More sharing options...
JG14_Smil Posted February 13, 2017 Share Posted February 13, 2017 Never seen it in my hundreds of hours of MP flight. Link to comment Share on other sites More sharing options...
Boris Posted February 13, 2017 Share Posted February 13, 2017 I'll check my axis commands again when I get home... PC Specs / Hardware: MSI z370 Gaming Plus Mainboard, Intel 8700k @ 5GHz, MSI Sea Hawk 2080 Ti @ 2100MHz, 32GB 3200 MHz DDR4 RAM Displays: Philips BDM4065UC 60Hz 4K UHD Screen, Pimax 8KX Controllers / Peripherals: VPC MongoosT-50, Thrustmaster Warthog HOTAS, modded MS FFB2/CH Combatstick, MFG Crosswind Pedals, Gametrix JetSeat OS: Windows 10 Home Creator's Update Link to comment Share on other sites More sharing options...
Slazi Posted February 16, 2017 Share Posted February 16, 2017 You can also check your input device on a second screen by diaplaying game controller input. Link to comment Share on other sites More sharing options...
mkiii Posted February 17, 2017 Share Posted February 17, 2017 It's the guy in the back messing with you ;) Link to comment Share on other sites More sharing options...
LeCuvier Posted February 18, 2017 Share Posted February 18, 2017 Sorry to dig this up, but I'm having the very same issue. The L-39 will yaw abruptly, seemingly at random, in normal, even straight and level flight. I'm certain it has nothing to do with the controllers as this is not an issue in any other module. Moin-Moin! As NeilWillis says: check your Options / Controls for multiple bindings (e.g. joystick, throttle, pedals) to the same axes! By default DCS binds axes for every new module to every one of your input devices; and you have to clear out all the unwanted ones. I'm 99% sure that's the origin of your problem. LeCuvier Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5 Link to comment Share on other sites More sharing options...
Recommended Posts