Jump to content

Reccelow

Members
  • Content Count

    31
  • Joined

  • Last visited

Everything posted by Reccelow

  1. Additional: The AI will sometimes park in front of the island resulting in foul deck / other AI crashing into it on landing. The angle of the AI parking needs to be adjusted to keep it behind the foul line
  2. I have the same issue with liveries on the Tomcat. I can change the AI F-18 (from the bazaar dir) fine, but the aft Tomcats stays as the Jolley Rogers regardless which livery I select. Script excerpt: -- ******************************************************** local staticObj = { ["name"] = "MassLaunch Fantail Tomcat 4", -- unit name (Name this something identifiable if you wish to remove it later) -- Copy and paste over this with the units information ["livery_id"] = "VF-41 Black Aces AJ101 (1991)", ["category"] = "Planes", ["offsets"] = { ["y"] = 12.199912370008, ["angle"] =
  3. Reccelow

    AI wingmen

    Be careful tanking with AI. I've been hit 3 times, twice while refueling and once while just about to plug. In the former cases, both times the AI dove off the hose into me. Didn't matter which side I was on, when disconnecting both dove into me. Seems they like to go inboard on disconnect. The last time I was just about to plug and was hit from behind on the left hose even while the right was empty. No indication or call he was there or cleared in. Now I just stay in lose parade until they leave....
  4. I regularly use this (I have Kindle version...) for the F-14 squadrons, deployments, etc. May be of help....."CVW-US Navy Carrier Air Wing Aircraft Volume 1 1975-2105" https://www.amazon.com/CVW-CARRIER-AIRCRAFT-PHANTOM-CRUSADER-ebook/dp/B07PNYVRY2
  5. The last update now incorporates the F14A, and I do see it listed in Moose. However Airboss is not recognizing it. I'm sure it's a naming convention error, how can I verify Moose is including the proper name? AIRBOSS.AircraftCarrier={ AV8B="AV8BNA", HORNET="FA-18C_hornet", A4EC="A-4E-C", F14A="F-14A_tomcat", F14B="F-14B", F14A_AI="F-14A", FA18C="F/A-18C", S3B="S-3B", S3BTANKER="S-3B Tanker", E2D="E-2C", C2A="C2A_Greyhound", }
  6. Indications are that these interfere with the new F-14A update. Perhaps the authors can look into this?
  7. Did the update, loaded up a mission, added in the the A and got....this???? The AI one looks better... Rolled back my version, rebooted, updated to 2.5.6.57949 (openbeta) same thing.
  8. This has been bothersome for some time now. Every now and then when doing A-G in the F-14 I will lose the "Hot Trigger" indicator and cannot drop ordnance. I can switch to AG Guns and it comes on again, switching back to ORD, it goes out and pickle is dead. This happens when switching back from the RIO cockpit. I'll be in the back getting setup for LGB designation and go back up front and the pickle is dead. This can happen after dropping one or two LGB's successfully . I've tried almost every switch and combination, even remap the pickle, just wont come back. Everything else is fine, al
  9. May I add a suggestion to the above? How about "Carrier Qualification" ie: completed the necessary traps within parameters, day/night etc. I remember the P3D program vLSO ( https://cfosfsx.wixsite.com/home/vlso ) had this....
  10. Regards adding DL to CVN-75: "Add CVN-75 to the data link capable carriers" I'm not seeing this as active after the update (prior saved or new mission created). Is there something else to do to enable it? It does not show in the Jester DL Host menu, not sure where to look for the actual freq to input in the RIO pit Has anyone have the DL working for CVN-75? Disregard, I see this will become active after the next update not yesterdays....
  11. Perhaps I'm missing something, is the Data link active on CVN-75? Jester doesn't list it in his options (he does with CVN-71/72/73) I've tried inputting the freq that shows with the other carriers manually in the RIO cockpit, which appears not to work. Is there a script or action that needs to be loaded first in the ME (as in TACAN/ICLS)? This is the system required for ACLS with the F-14 correct?
  12. I've narrowed it to CVN-75, the newest addition to the Supercarrier series. Can anyone confirm if they have AIBOSS working on CVN-75?
  13. Is there an issue with Airboss on the Syria map? I can get everything else to run (RecoveryTanker, AWACS, RescueHelo) . I use the same script for Caucaus and PG, just change whichever CVN number I use. Cannot get it to run on Syria. Script working in other maps: --Basic Airboss change CVN-XX to carrier named and add TACAN ch) local AirbossCVN = AIRBOSS:New( "CVN-XX" ) -- UNIT name of CVN AirbossCVN:SetSoundfilesFolder("Airboss Soundfiles/") AirbossCVN:SetMenuSingleCarrier() AirbossCVN:SetUserSoundRadio() AirbossCVN:SetTACAN(XX, X, CVN) AirbossCVN:SetICLS(11, CVN) AirbossCVN:Se
  14. I see in the F/A-18F folder the models for F, F(A-G), and G. Not seeing the G show up in mission editor, how do I enable it? Not to fly, but would like a Growler on the deck as a static....
  15. Fantastic persistent mission. I've changed the maxairborne down to ease the load. After the initial generation of sorties, after a bit my (Blue) side drops off with no more sorties generated. I've added Airboss in, so do the (Airboss generated) RecoveryTanker, CarrierAWACS, and RescueHelo spawns count as "generated sorties" on my side? What is parameter for inclusion into the maxairborne count? Excellent work, easily my favourite now. Ps, I've made four copies of PP, one starts at dawn, one day, one evening and a night. Doing each in turn creates a "mission day"......I'm on "Day 3" a
  16. Same issues with carriers since update. If i roll incrementally back to 2.5.6.54046, everything works. On my system I have no carriers with the following versions: 2.5.6.55847 BETA 2.5.6 Unified Version - Bug Fixes 2.5 Update Change Logs 10-02-2020 2.5.6.55743 BETA 2.5.6 Unified Version - A-10C II Tank Killer Early Access Launch / Bug Fixes 2.5 Update Change Logs 09-30-2020 2.5.6.55363 BETA 2.5.6 Unified Version - Partner Module Features / Bug Fixes 2.5 Update Change Logs 09-23-2020
  17. Thank you. I can now land and park 4 AI easily. One defies gravity a bit.......ha ha
  18. This is where the first aircraft to land parks...
  19. Fantastic job! I've added the R91 into the US carrier group for strikes on Raqqa using SEM & Rafale. Takeoff from carrier is working very well using "Takeoff from runway" using both catapults. Only one aircraft can land as it parks fouling the deck. How can I adjust the AI parking locations? The aircraft need to be back just a little further to clear the foul line I see this in the .lau, which values are forward/back? GT.TaxiRoutes = -- taxi routes and parking spots (LCS) -- x y z V_target { { -- 1 parking spot {{65.0, 16.25, -25.0}, 3.0}, {{7
  20. This needs to be verified, but I'm pretty sure the Canadian (CF-188) version has civilian ILS capability
  21. Agreed. Rather tired of setting up a mission then getting carrier nicely populated with a few statics, loading up and...."Your flight is delayed please wait..." even with all cats empty...
×
×
  • Create New...