Jump to content

Tanuki44

Members
  • Posts

    267
  • Joined

  • Last visited

Everything posted by Tanuki44

  1. No worries, I settled with the same time but in March. The rendering is nice, it gives a good base to fly to instruments without being in the dark night
  2. I confirm but in outside view (F2) we don't have the rain effect like in the 2.5 version
  3. Thanks, I will test this as soon as possible, I am not in VR
  4. Personally, I use a reproduction of the real handle with the brake lever mapped on a axis and with a mechanical latch. I'm not sure what the best solution is with only buttons Good continuation
  5. Yes, see the screenshot, the joystick button #1 is mapped to this command. No, I haven't loaded the module 'Mosquito' yet, I don't have time to try it.
  6. But BTN1 works, press and hold the button, the brake will remain on, I don't understand what's wrong ....
  7. I like the thick fog with the sun, how did you set the weather parameters?
  8. I just tested, on the capture the BTN1 works with a pushbutton and also with a switch ON/OFF This also works if the brake is mapped to an axis (axis on Mini, switch or pushbutton ON) The brake will be on Max until the switch or push button is released.
  9. Only those who have the module could tell us or ED The management of these module it is classified in Miscellaneous, not in VR
  10. Another response from them .... which doesn't really answer the question ....
  11. Here is a response from UltraLeap to whom I asked the question :
  12. I follow the instructions in the manual: During the flight when the cargo swing occurs, damp out oscillations:  when the roll oscillations occurs – make a small roll movement in the same direction where the cargo is moving or reduce a little the collective pitch at the moment when the cargo is close to one of the end points;  when the pitch oscillations occurs – reduce a little the collective pitch at the moment when the cargo is close to one of the end points. You have to feel the imbalance that the load produces to compensate, with each compensation the imbalance decreases, therefore the correction also.
  13. Very interesting, same question ...
  14. I just tested with a joystick x/y on these axes and I have the original keyboard keys: I have no problem as you describe it with the last OB
  15. Too bad it does not work, I can not help you anymore, I only use Promicro and SS495A.
  16. This member is QG 475FG and his Mod : https://www.digitalcombatsimulator.com/fr/files/3317381/
  17. the GEN Pin seems to be B6 on Promicro and Teensy ++ 2.0 https://forum.il2sturmovik.ru/topic/4664-mmjoy2-бесплатная-прошивка-и-софт-для-самодельного-контроллера-джойстика/page/2/
  18. Compared with a connection on Promicro https://simhq.com/forum/ubbthreads.php/topics/4508405/joysetup-mmjoy2 The GEN pin is not connected to MOSI...
  19. What Mod do you use for the F6F Hellcat? If these Mod uses the P51D, it seems normal that there is no problem
  20. Here is a supplement of my tests With the CV8, these AI planes take off automatically after 30" Bf 190k-4 FW-190A8 FW-190D9 MosquitoFBMkVI SpitfireLFMkIX SpitfireLFMkIXCW P-47D-40 P-47D-30 P-47D-30bl1 P-51D P-51D-30-NA TF-51D I-16 ********** With the CV11, only these AI planes do not take off Bf 190k-4 MosquitoFBMkVI SpitfireLFMkIX SpitfireLFMkIXCW I-16 The other AI planes take off automatically after 30" I will test later with the other aircraft carriers
  21. Great job Here are my tests: I put a Spitfire AI on every model of carrier sailing at 27knts : CV13 CV11 CV8 CV6 CV5 The aircraft automatically take off from the CV8 and CV13, but not of others carriers... But I don't know if it's related to the definition of carriers
  22. I use a MOD that I install with OvGME and https://github.com/Quaggles/dcs-input-command-injector/ to correct or modify each module, it goes very fast with each update but the worst is that the opposite has been done in the TF-51D module...
  23. With the latest update, the TF-51D module has been modified identically to the P-51D, so now both modules are broken for the canopy ... I modififed again 'pressed = device_commands.Button_2' and it works now ... ---- I don't remember, I only tried the P-51D with the trial period after the release of the 2.7 and now the period is over. I can just test with the TF-51D module, can you confirm the keyboard shortcuts?
  24. I don't have the P-51D module activated anymore but if the problem is the same as for the TF-51D module, you can try this path
×
×
  • Create New...