keithBud

Thank you.

I updated to DCS 2.7.9.17830 Open Beta today and can no longer rotate the top selectors for both VOR ILS and TACAN. It only rotates the lower portion, such as the "A" to "M" on the left VOR ILS or the "X" to "Y". It does not work on all four of the selectors. I tried it in missions and the campaign. Thanks in Advance.

RAF_LOKE, Someone told me how to do it. It is on the axis controls screens, just scroll to the bottom and there are wheel break axis controls.

I recently purchased the Logitech Flight Rudders and they are by default bound to the different DCS aircraft. I issue is that the toe buttons are bound to pitch and roll as joy x and joy y. I want to bind them to the left and right brakes, but it won't let me do that. Is there something I need to do to change it from an axis control to a button? Powerspec G700 AMD Ryzen 7 1700 8-Core Processor 3.0GHz NVIDIA GeForce GTX 1070 8GB GDDR5 32GB DDR4-2133 RAM 480GB Solid State Drive and 960GB Solid State Drive Thanks in advance, Keith

Thanks. I am talking to Thrustmaster to see if it can be resolved. Keith

My Thrustmaster T16000M RZ axis is pulling to the right. In DCS, you can see the rudder jumping over to the right side. This is not specific to DCS. I went in to the device manager and could see the bar for the RZ axis popping up and then going down and popping up again. I cannot turn it to the left. Any thoughts on fixing this? Thanks in advance, Keith

My Thrustmaster T16000M RZ axis is pulling to the right. In DCS, you can see the rudder jumping over to the right side. This is not specific to DCS. I went in to the device manager and could see the bar for the RZ axis popping up and then going down and popping up again. I cannot turn it to the left. Any thoughts on fixing this? Thanks in advance, Keith

Chuck, That seems to fix it. Thanks for your help and the guides; they are extremely helpful. I guess I have to do some practicing this weekend. Thanks, Keith

I am having challenges with the CCIP Bombing in the M-2000C. I select the fusing, the number of bombs, and the interval. The radar is on and radar altimeter is on. I select Master Arm, the BF1 and TAS. The radar does not go black with the TAS. It just keeps operating as normal. I have done both training missions in the Caucasus and NTTR, along with the instant action missions. Read the manual, Chuck's guide, and watched some videos. What am I missing? Thanks in advance, Keith

Thanks. That helps. Keith

I was playing the Mission 1 today and during the alignment I entered the 466M is the left window and the altitude in the HUD showed -280. I remembered the left was for feet. I restarted the mission and then entered it in the right window and it stilled aligned to -280. The third time I did nothing since 466 was already in the right window and still the HUD still showed -280. Did I miss something, is this a bug, or something else? Everything else seemed fine and I fully completed the mission. I am running Open Beta 2.5.5.33184. Thanks in advance, Keith

I had some time this morning to work on it. This definitely seems much better. Thank-you to the both of you.

For about a week or so, I have been getting a screen stutter or pause when flying about any module. My specs are: Processor AMD Ryzen 7 1700 processor OS Windows 10 Pro 64-bit System Board ASUS PRIME B350-PLUS System Board System Memory 32GB composed of 2- 8192MB DDR4/2133 DIMMS Hard Drive 480GB SATA Solid State Drive Video NVIDIA GeForce® GTX 1070 PCI Express / 8GB GDDR5 memory I am also using Track IR5 and TacView. I have updated the video drivers. The attached screenshot is showing a fps of 77. Any thoughts? Thanks in advance. Keith

Thanks. I will look at the TARGET software. Keith

Downloaded and loaded another profile in the control options. Only the buttons on the bases and axis commands show up for the joystick; none of the buttons or controls and the top. The throttle only has the axis commands; no buttons or switches. Thanks, Keith

I downloaded an F/A-18C T16000 profile for the joystick and Thrustmaster throttle. I tried to "load the profile" on the configuration page, but it does not look like it is there when I go look at it. Should the files be copied to a DCS folder somewhere? I am planning to switch around a few items. Thanks in Advance, Keith PowerSpec G700 AMD Ryzen 7 1700 8-Core Processor 3.0GHz; NVIDIA GeForce GTX 1070 8GB GDDR5; 16GB DDR4-2133 RAM; 480GB Solid State Drive / 2T Disk Drive