wraith76

Same here, its a mess now. Can't play DCS at the moment unless I use Virtual Desktop.

Meta Quest 3, having the same issue. DCS will load up to the NVIDIA logo then crash.

Was this resolved? I have the same issue. Was this resolved? I have the same issue.

I seem to always have performance issues. I guess i really need to sit down and go step by step through a performance tweaking guide. I don't think I've ever flown without low FPS and stuttering. My hope is its not as bad in the Beta but I kinda figured it would be with better clouds etc.

I'm about to install DCS again after a long break. I'll be using VR and I am wondering which will be a better experience for me 2.7 or 2.7 beta? HP Reverb G2 Intel 10900k 64GB DDR4 3200Mhz 3080TI 980 M.2 2280

Hi All, A buddy of mine and myself are looking to get a WWII plane and do some flying together in a WWII era campaign or mission. I have no clue about the WWII planes, assets and campaigns. We were looking to get the P-47D however any recommendations would be welcomed. We would prefer the Ally planes. Anyways, my main question is 1. Do we have to buy not just a WWII plane but also the WWII Asset pack and the Channel or Normandy maps as well? Do we get any missions/campaigns that come with just the P-47D that include WWII enemies? 2. Are we able to do WWII campaigns together in coop? Could any of you recommend or offer your opinions on the best route to take for a good WWII experience? Thanks!

You were correct. Thanks man!

That makes sense. I'll give this a try and see.

Hi All, I bought voice attack years ago on steam but never used it. I wanted to get the Viacom Pro plugin so I went to steam and installed Voice Attack. However, when I run the Viacom install I get "Voice attack is not installed" message. Any ideas?

I have this issue as well. It happens when i go above the clouds. RTX 2080TI Reverb G2 Same here, even in single player.

I tried this with no luck. I've noticed that PD .5 has the bouncing clouds issue for me. If I raise it to PD 1 then they it goes away. However, no matter what the PD I set I still get the blurry clouds regardless of low - Ultra Cloud settings. (I selected the default VR settings in DCS then tested PD .5 - 1) FPS is lower than usual but not by a whole bunch. Also, I get the halo effect mentioned in other threads. This halo happens when I go above the clouds. My thoughts are its happening when i have an upper deck of clouds above me and a lower deck. The best way to describe the halo is the outer most area of my vr lens have a slight glow at the top and bottom. HP Reverb G2 (Running Steam VR) RTX 2080 TI Driver 461.92 i9-10900k 62GB DDR4 3600

I've just started learning the Harrier and when It came to launching those Mavericks I about pulled out all my hair haha. I did everything right(or so I though) uncaged, locked, in range etc but It would not fire. After doing some forum and google searching I ran across a post saying you need to have your nozzles at 0. Anything other than 0 the Maverick will not fire or seems to never fire. So far I have been able to fire every time now with the nozzles at 0. Hope this helps.

Sorry, 1k US.

I am looking to buy one of those sim cockpits that consist of a chair and mounts for my flight controls. I also race in iracing so I am looking for something that Can mount a steering wheel as well that is under 1k that can do both flight and racing sims. I don't the cockpits that come with the screen mounts since I will never be adding on monitors, I'm 100% vr. Anyways, I could really use some advice on a quality brand that wont put me over 1k that can handle flying and racing and preferably have a keyboard mount as well. Thanks!

I figured it out. In short I needed to redo the part that has you either select room space or sitting down experience. I selected sitting down and it went back to normal.

I don't think the tracking is the issue for my VR. I can play iracing and MS Flight Simulator with no issues. When I switch over to DCS I lose the ability to move forward/backward left/fight. I can only move my head in a yes or no motions as if my head is fixed in place. I was able to get past the stutter issue. Don't ask cause I don't know how haha. I run Med to high on all the settings and I seem to be able to maintain 90FPS. I'm still trouble shooting the head stuck in place issue and will update if I come up with the solution.

One other question. I have Windows Mixed reality running, I also have Steam VR. Should they both be running or should I uninstall Windows Mixed Reality and leave the Steam VR to do the work? I'm not quite sure how this works.

Hi all So i just built my new computer for flying and racing in VR. Over the last 2 days I am slowly figuring out how to get my system running properly. I followed this post https://forums.eagle.ru/topic/254858-bignewys-reverb-g2-settings-for-high-frame-rate/ and it has helped. I am however running into two issues that I can't seem to figure out. 1. My VR doesn't allow me to move my head around like leaning forward or to left and right, its completely fixed in place, i can rotate my head and look around but that's it. This wasn't the case earlier yesterday when I was able to move in all directions. I tried rebooting and disconnecting the VR. 2. The objects on the ground seem to blur or stutter when i fly by low. This one is strange, if I am looking out the front of the cockpit everything is smooth, if I look to the left or right of the cockpit at the ground the objects stutter for as long as I watch them. When I look back forward its stops. I watched my FPS and it never dropped below 75FPS. Basically I cant look left or right at the ground without crazy jitters. My Settings are the same as the ones posted in the thread above. GIGABYTE Z590 AORUS Elite Intel i9 10900k DDR4 3200 64GB Western Digital WD BLACK SN750 NVMe M.2 2280 1TB SSD - Newegg.com RTX 2080 ti HP Reverb G2 I've updated all my drivers My CPU never gets over 60c I Installed OpenXr I also tried turning shadow off, turning preload radius to 50% but nothing changed. Side note: Pretty damn cool experience so far despite the issues. I quit years ago to wait for a day we could actually see the cockpit details in VR and have FPS over 45.

Well I pulled the trigger and ordered the 10900k. I can see they are already scalping the preorders for the 11900k at around $1100. With that I said F#$% It because I feel it will be just like the GPUs and always sold out. I'm also worried the 10900k price will go up once this happens. Either way I appreciate y'all taking the time to comment. I'll be flying next week and back on the race track in iracing. Can't wait to see what its like to go from a 2.5Ghz System, 1080 GPU and Oculus rift to a 10900k, RTX2080 TI HP REVERB G2 Setup! Its been 3yrs since I touched sims!

Thanks for the response! I'll admit I am fairly knowledgeable with building computers but I guess I don't know as much as I think I do haha. I had assumed at some point no matter what current CPU or GPU combo you would throw at DCS you wouldn't take a FPS hit. I was always looking at it as how can I reach full settings with 45FPS or 90FPS. Could this be done with a 10900k and 3090 if not then which device would be the culprit that is slowing down my FPS, GPU or CPU? I assumed it would be the 10900k and was wondering if the 11900k would solve this problem which was the main point of my thread(My biggest question right now is 10900k or 11900k? ). I've been reading more through the forums and man o man its feeling like Theoretical Physics haha trying to hypothesize the solution to the an ever elusive answer! I wonder if I did a side by side test (10900k/3090) vs (11900k/3090) would they both share the same FPS? I'm sitting here with all my new computer parts delivered minus the GPU and CPU. I will be getting a 3090 but probably not till next year so for now I'll be using my 2080ti. However I am just assuming I have the 3090 since that is my end goal, I am STILL ON THE FENCE on the CPU. I could just buy the 10900k right now and get to flying but I would hate it if I saw that the 11900k boosted the FPS in a meaningful way (15 FPS). I probably should just settle down and wait for somebody to post their experience with their new 11900k and 3090, it's bound to happen soon. hahah I guess after a 3yr wait I'm getting supper impatient.

One more question. Would the M.2 I am buying keep me from suffering any stuttering? I've read that you need a fast ssd to avoid any stuttering as the terrain is loaded in.

Have you tried using older drivers for you graphics card? Does both cards use the Display port or do you have to use an adapter for one card but not the other? Are you running your G2 on 90 or 60hz? Have you tried to toggle between them? Also, try swapping to different ports on your card.

Here is the first single thread Benchmark I found. I'm not a benchmark guy so I don't know if the 11900k is blowing away the 10900k or if this is close in performance? Anybody know?

Hi all, I left DCS about 3yrs ago so I could wait for VR to become more usable in DCS. Well now I have the $$ to finally build a new computer and word is VR is much better these days? My biggest question right now is 10900k or 11900k? Has the 10900k relieved the cpu bottle neck issue if not then I assume the 11900k with its much much faster single core/thread performance will solve this issue? I also wonder if the 11900k with only 8 cores will take a hit when Vulcan is implemented? Here is what I plan on getting. I already have a 2080ti but will get the 3090 once all this BS shortage is over. I'd appreciate any input you guys might have. Thanks! CPU 11900k (If they don't fall into scalper hell) <--- Curious if this is overkill and I should just get the cheaper 10900k? VR HP G2 Reverb Mother Board GIGABYTE Z590 AORUS Elite Mother Board Hard Drive Western Digital WD BLACK SN750 NVMe M.2 2280 1TB PCI-Express 3.0 x4 64-layer 3D NAND Internal Solid State Drive (SSD) WDS100T3X0C Memory TEAMGROUP T-Force Vulcan Z DDR4 64GB Kit (2x32GB) 3000MHz (PC4-24000) CL16 PSU Corsair RMX Series, RM850x, 850 Watt, 80+ Gold Certified, Fully Modular Power Supply (CP-9020180-NA)