Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by HipoxiK

  1. Hi All, After a break from DCS I have done the 2.7 update. Now my left hand Reverb G2 controller joystick controls the aircrafts flight stick and interferes like when you have multiple joysticks for the same aircraft assigned. I can’t find out how to turn this off or ‘un-assign’ without turning the controller off. I’d like to use the controller to click around the cockpits still until the day that PointCTRL finally arrives…if ever. Any ideas? Cheers
  2. Haha yes that is true, wasn’t sure if that is a limit of the sim or not. Either way I only look under the NVG’s to look inside the cockpit like normal so I don’t pay much notice to that.
  3. NVG image blur when looking in cockpit is accurate. This is because ANVIS goggles can be focused between about 40cm to infinity. When you focus your goggles you normally set the optimal clarity about 30 - 50ft away from you so that you can most clearly see obstacles when conducting confined area operations (primarily helicopters) and you can't see detail in objects hundreds or thousands of feet away anyway. When you do this anything within around 3ft or closer will be blurry hence cockpit gauges are blurry through NVG's. Can we alter the size of the NVG ring though as it's cutting into the sweet spot of the Reverb G2's making it harder to see the gauges under the NVGs. Although not realistic it would be helpful to have no ring or a very thing ring around the NVG's. Cheers
  4. I have pre-orded and can't wait to get a set of these. I'm sick of having to pick up a VR controller to click around the cockpit then put it back down. Would it be posible to add/sync the DCS VR hand models to these devices? I can imagine the immersion being better again if your hand is moving around the cockpit as it does when using VR controllers in DCS. Cheers and thanks for this amazing piece of tech.
  5. Stock NVG settings with the VR Shaders mod actually works almost perfect with the Reverb G2. Don't need Tacca's NVG mod now. One question though, can the blurryness (is that a word) be dialed down around the NVG ring so it's a clean NVG circle? I see in C:\Program Files\Eagle Dynamics\DCS World OpenBeta\Bazar\shaders\deferred\_HMD.hlsl you can make adjustments. Will one of these affect blurryness outside of the NVG ring? Cheers
  6. Thanks guys look forward to testing these. Hopefully Tacca's NVG mod works over the top as well. Trying to get a proper NVG look is a nightmare with the Reverb G2's dual displays.
  7. I know we can get mission kneeboards to load onto VRK but can we get the module specific kneeboards like for the F-14 and AV-8B or is this not possible. It's immersion breaking to have to bring up the stock DCS kneeboard to see these pages. Cheers love the application.
  8. If you guys aren't aware check out VRKneeboard. This allows us VR users to have a virtual kneeboard that is customisable including taking notes like 9-lines.
  9. I believe that was just the 'pause' TrackIR key what ever you had that bound to. +1 for VR head tracking not moving the gun around.
  10. Yeah I like to dive into the Performance Data section and plan. I'll be interested to see how the Polychop simulation goes and if the predicted TQ's in the manual are accurate enough to use in the sim. The Huey is a bit out but I believe they are working on new flight dynamics and engine model for it.
  11. Thanks mate, appreciate the info. I thought better safe then cop a forum ban.
  12. No as I'd rather keep the axis of the throttle instead of it emulating key strokes.
  13. Yes exactly. I have a twist throttle on my custom collective with an idle stop detent but I can’t use it on the Huey and was hoping the Kiowa module will cater for this.
  14. This is true. Maybe there could be 2 throttle axis options that users could choose from depending on the peripherals you have at home. Another good option. This would also work with the Huey.
  15. Hi Polychop, Are you going to model the throttle axis to go below the idle detent so that users can use physical detents on realistic collective/throttles, maybe using custom axis curves to adjust the position. The DCS UH-1h Huey doesn't allow the throttle axis to go below the idle stop detent which means you have to use keys or the mouse to shut the acft down or do proper start ups breaking immersion. Cheers
  16. Links removed as they could not be verified as unclassified or non ITAR's controlled IAW forum rules.
  17. Hi All, I recently searched for some documentation for the OH-58D and had some success finding free downloads of the following. I wanted to start a topic and share this for those that weren't aware these documents were out there for download. Google the following and you should be able to find free downloads, I didn't provide direct links as they may change in the future. TM 1-1520-248-CL - Operator's and Crewmember's Checklist OH-58D TM 1-1520-248-10 - Operators Manual OH-58D TC 1-248 - Aircrew Training Manual OH-58D (This will be useful for those wanting to do training missions) Not sure if the KW guys used mission cards or mission packs on their kneeboards but if anyone knows about this and has a template I'd appreciate that. This would be a great addtion on the VRKneeboard. Thanks to CasmoTV and Barundus for some great in depth YouTube videos on the KW. As an ex Blackhawk/Chinook Crewman/Maintainer and now EMS B412 Crewman here in Aus I found them very insightful. I look forward to learning this module in DCS. Enjoy!
  18. I think this is a great move fella's. Nothing worse then all the beta releases these days and having to deal with crashes and half functioning systems for months. It will be much better and well worth the wait to jump into a mission ready Helo. Cheers
  19. Fixed - Just had to remove and reload the mods through JSGME
  20. Great mod. My VR experience was much smoother. However now the NVG mod I was using (Tacca's NVG Mod) no longer works. It seems to default back to the standard DCS NVG which is the entire render being NVG instead of a more realistic NVG tube in the centre which the NVG mod provides. Any work around for this? Cheers
  21. Any more progress on your Huey cockpit? I'm starting to design a centre and upper console to make DCS more fun and would love to see your progress.
  22. All of the items I used are listed on the Thingiverse page that I linked where I put all the information required to make the cyclic so check that page out mate.
  23. Yeah being that it's reasonably cheap to make it's great fun to use. It's still a cheap option using old FFB technology but it's so much better to use a non spring centering stick when flying rotary wing. You can also use the force trim switch correctly in the Huey to switch the FFB on and off for easier hovering or stick position hold...although again it's not perfect as the Microsoft FFB is old tech.
  24. If you follow the link I provided to the thingiverse page you can download the .stl files for 3D printing.
  25. This is slightly off topic from the TACAN but my ILS power selector seems to be opposite. When I turn it to 'OFF' on Helios it goes to 'Power' in the acft. When I set it to 'Power' on Helios it goes to 'OFF' in the acft. Any ideas?
  • Create New...