Jump to content

dbeaty

Members
  • Posts

    82
  • Joined

  • Last visited

About dbeaty

  • Birthday 11/22/1965

Personal Information

  • Flight Simulators
    Falcon, LOMAC Flaming Cliffs, ARMA II, Phoenix RC, DCS: A-10C
  • Location
    SW Florida
  • Interests
    Kayaking & RC Helicopters
  • Occupation
    Video Producer
  1. If you were playing with ultimate realism, and if you were being directed by JTAC to a target, they may lase it for you from the ground or from another aircraft and you would use their code? But even then, in this sim, the preset always has worked for me in SP missions. Otherwise, it's the default setting the crew chief programs for you for your aircraft's TGP at mission start, no user input needed.
  2. It's true. A well camo'ed dug in unit, is going to be hard to spot at 10,000. Use the map, use the steer points, use TAD, use labels if you must ( I modified mine to only to be black specs that show up around 3000 meters and then disappear as I close on them). Hey we still don't have 4K 3D displays yet so we need a crutch.
  3. Got it :thumbup: But I'm not imagining things right? In 0.8 I could just yank on the stick and the wings did not break off. I'm just sayin'
  4. Yup. Bad habits in 0.8 lead to dead in 0.9. I'm clearly fixated on the target, passing 390 indicated this shot is just pulling off the target. 6 Gs ++ it went up to 7
  5. Glad I found this, as I just had this happen. Using the same flying as in .8 I snapped wings off 3 times in a row during gun runs. This was with full load out on Instant Action. Just dive in on the first target and when you pull off hard on the stick the right wing breaks off. Not sure speed, prob around 295. Tried it with speed brakes extended and low throttle, I was able to pull off target and keep my wings. The first couple times I replayed track, not understanding how an unarmed fuel truck could shoot me down! :cry:
  6. I just noticed there maybe a change to the way G forces on the aircraft are modeled. I am not that gentle on the controls and in .0.8 I never had wings rip off like in .0.9. I had to go back and watch tracks to see how come I was losing wings coming off strafing runs. I though perhaps I was getting hit with MANPADS, but no, it's when I yank and bank. Wing rips off. Third time in a row, so it must be I was flying outside the envelope in .0.8 and it caught up to me.
  7. True. You might want to change that color value unless you have psychic ability or are being given intel in some assumed mode during flight briefing as to which side is where. And you hope it's a seal not AAA. It's imperfect because a person or a tank uses the same code. 1000m might be better. But by then, the guns may open up on you. 5000m might just save you if you spot the gun. ColorAliesSide = {0, 0, 0} ColorEnemiesSide = {0, 0, 0}Then everyone looks the same. A speck.
  8. Here's my mod setting's for "Program Files\Eagle Dynamics\DCS A-10C\Config\View\labels.lua" AirFormat = {} AirFormat[1000] = "" AirFormat[10000] = "'" GroundFormat = {} GroundFormat[500] = "" GroundFormat[5000] = "." NavyFormat = {} NavyFormat[1000] = "" NavyFormat[10000] = "." WeaponFormat = {} WeaponFormat[5000] = "." -- Colors in {red, green, blue} format, volume from 0 up to 255 ColorAliesSide = {100, 0, 0} ColorEnemiesSide = {0, 0, 100} PS it's actually (blue, green, red format) for me in the sim. Otherwise your pals will show up RED!!!
  9. The problem I was having was I was getting through the start up procedure and getting airborne before ALIGN was complete. I was able to arm EAC ( the switch the left of the autopilot button) only after getting airborne and waiting for ALIGN to complete. IOW, not on the ground. I was too impatient - not following the rules. Needless to say, the EAC switch must be up (armed) to engage autopilot in V 1.0.0.8. If it flicks back down when you push it, ALIGN is not complete. Or HARS is still selected in the front panel. Otherwise, the problem may be that you are outside of the engage parameters when hitting the autopilot button.
  10. Thanks! I needed that pdf. Plus the symbology info. I still have not learned the various RWR icons. I assume 16 and 18 are F-16 and F-18 and love seeing those appear or AWACS. So Far, I have not seen any of the more deadly SAM's like the SA-6 and SA-8 in the included missions, or maybe that's because I am staying close to waypoints and taskings. I have battled the Strellas and Tungustas. Are these 30-40,000 foot ceiling SAM's around or only in custom missions? I try to stay above 10K usually more like 14.
  11. I was testing CCIP release mode at various altitudes. Pickling the bombs on the middle of the group is the way to go unless they are moving. But there are some hazards with these bombs even though they are supposed to fall behind. Wings are not completely level but the trajectory of the bombs is somewhat random anyway. Sometimes one bomb will fly out 300-400 feet laterally. Again, they are not spinning like in real life. I've been reading that A-10's did use BSU-49's in the Gulf wars. Here's a vid, much higher altitude than I've been using.
  12. Quick question, in the profiles, LGB's default to no auto lase. I was thinking that auto lase at 8 secs was a good thing and make sense in the heat of battle, it takes a while to change the profile mid flight. Wouldn't a data cartridge have an auto-lase as the default and let the pilot disengage that if ground troopers were providing lasing?
  13. Druid, perhaps that is correct, I was following instructions from a previous topic and never did test that out. I just assumed lead vehicle was the release point. Watching tracks from level attacks, pickling at lead target, it seems correct as all vehicles were destroyed in the sim. I am able to take out the line without them falling short. So it's a conundrum. Anyone know if middle of the pack it correct for low level runs in the F-111?
  14. Quote "Why did they plant trees there? C'mon! " .....then a few seconds later, "Got it." LMAO Nice. See you had it all along, it just took a little while. Now get back to reading the manual...twice!
×
×
  • Create New...