Alkaline

Got a 5700X3D and 64GB of RAM, so it should be fine, ye?

Can i play this on singleplayer? Like, load the mission in singleplayer, or is it required to have a MP server?

Hey guys, I need some help please. PICO 4 AMD Ryzen 7 5700X3D RX 6700 XT 12GB VRAM 64GB RAM ASUS WiFi 6 router on 5GHz band, 1200mbps local speed (The speed that bitrate needs) I use HEVC codec at around 130 mbps. For my standards, i get good quality, a bit low fps at times (30-40), mostly around 55 tho at 72 hz. Graphics in DCS is high, Pixel density 1.2. High settings in VD (U know, the list where top is god mode). I notice latency tho when i move my mouse, its a few milliseconds behind. I only use the mouse during cold starts tho. Is the latency caused by too high bitrate? Will decreasing from 130 mbps cause bitrate artifacts? Can I get some tips regarding the bitrate and codec?

Hi, I am pretty new to the F-16 Viper, so please bare with me, hehe. I used to fly the F-15C for many many years, but I recently purchased the F-16 Viper. The big advantage is the datalink in my HSD. But here to my issue/question. Sometimes, the HSD does not show all bandits. Sometimes, outta nowhere, a bandit can pop-up on my FCR and prior to the popup it wasnt a detection on the HSD. Is this like server lag or something? Because to my understanding, the HSD shows targets because of the AWACS and other aircraft that has datalink? And I always press the datalink button on the HSD so it says "TMOL" i think. I press it one time, I think its like right OSB 5.

Yes, i saw in the original attachment after I wrote my reply, my apologies. Thank you very much for your answer, have a great day sir.

What, I cannot use the FCR with ECM activated? In other words, I cannot have ECM on and engage in BVR at the same time?... Then why the hell do we even have ECM and why can the F15 do that when its several years older?

Hi, Whenever I want to activate ECM emissions, the HUD says "NO RAD". Does anyone knows why? Mode 3. What mode is usually used for air-to-air threats?

Hello, I am a returning player. Due to drug addiction for 7 years, I sold everything i owned, incl my gaming rig. I used to play on the 104th server every single day for a year. My name there was Alkaline, and sometimes Alkaline Love Roids. Here I am, 9 years later with a new gaming rig and just started playing again yesterday. I have to re-learn very much, but I think I will catch up rather quickly. I would love to join a squadron. These aircrafts are my passion and what I love to fly. A-10C F-15C KA-50 F-15C is my favorite on these 3. Just hit me up!

Hi, I have been unable to play for a long time, and I really really miss DCS and all of my friends in DCS.. All players regulars on 104th, Im coming back soon! :) Can this laptop handle this game at all? I mean, can I play for e.x on lowest graphics with decent FPS? See specs below. Packard Bell EasyNote TS CPU: Intel Celern B800 1.50GHz L3 Cache: 2MB Graphics: Intel HD Graphics (Max dynamic Freq; 1GHz 6GB RAM Thanks in advance. Regards, Robin

No probs guys! Everything is set with Helios F15 profile, with the radar perfectly fitted in the blank area! :)

Hi, So, I have the radar configured decent now, so I got room for ~2 more instruments on my 2nd monitor. I want the HDD (Heads-Down-Display) and RWR on my 2nd monitor. I have been researching for hours, but I dont understand how to! I tryed Helios software, it just gave me a WerFault.exe error all the time, I tryed EasyMonitorconfigure software, but that aswell gave me nothing but errors.. Can anyone please tell me how to do, or like, write me a code? Main monitor: BenQ 24'' 144Hz 2nd monitor: BenQ 21,5'' 60Hz My code that im using at the moment is _ = function(p) return p; end; name = _('Camera + LMFCD automatic placement'); Description = 'Camera on primary display and Left MFCD on secondary' if displays and #displays > 1 then primary = { x = displays[1].x - screen.x, y = displays[1].y - screen.y, width = displays[1].width, height = displays[1].height, aspect = displays[1].width/displays[1].height; viewDx = 0; viewDy = 0; } secondary = { x = displays[2].x - screen.x, y = displays[2].y - screen.y, width = 1024, height = 1024, } else primary = { x = screen.width / 2; y = 0; width = screen.width / 2; height = screen.height; viewDx = 0; viewDy = 0; aspect = screen.aspect / 2; } secondary = { x = 0; y = 0; width = 1024 / 2; height = 1024; } end UIMainView = primary LEFT_MFCD = secondary Viewports = {UIMainView}

And...? Should I create a new .LuA file in DCS World/Config/MonitorSetup with that code?

Ah, selected Camera + MFCD (Automatic position), then it worked. Not as expected though... I mean, the radar on the 2nd monitor is full size 21,5'' and kinda ugly... I mean, it looks like Tetris or something.. :/

Hi, I just got a 2nd monitor, and I'd like to use it with DCS, for example, get the F-15 MFCD on my 2nd monitor, or maybe even the radar itself on the 2nd monitor? Both monitors are set to 1920x1080 in Windows My left monitor numbered "2" is my main display in Windows I use "Extend these displays" Main monitor: BenQ XL2411Z 24'', 144Hz connected with Dual-DVI 2nd monitor: BenQ E2200HD 21,5'', 60Hz connected with HDMI GPU: Sapphire Radeon R9 270X 2GB (Overclocked from 1070MHz to 1090MHz) CPU: AMD FX-8320 (Overclocked from 3.8GHz to 4.7GHz) I've been trying different settings in DCS Options, but its aaall messed up. I noticed that I can select 3k resolution aswell when I connected my 2nd monitor. Help is appreciated! :)

Please update :)