Faman

I've found the solution for my problem, it was indeed a matter of turning the force feedback off. I am using the Thrustmaster T-Flight instead of the Logitech G940 FF I have because the latter is not supported anymore in DCS(!): the trim wasn't working and the stick is not centered for many planes. The Thrustmaster has sensitive control for the Ka-50 and you must use soft inputs. And I can fly the Ka-50 now without a crash or kamikaze! I hope ED updates the support for my Logitech G940 because it's such a shame it is not fully supported.

Is it KAmikaze-50 or KA-50 KRASH? I don't care about the autopilot but it just flies lousy. I do believe that the system works if the nose is pointing more straight: now I have waggly nose that goes up and down with very unsure stick movement, and then you constantly have to correct the autopilot as it is not valid anymore after a correction. Then you easilly exceed the 300 barrier and your rotor breaks..

I'm trying to fly this helo but it doesn't fly at all! It is already oversensitive with slight corrections to the autopilot with trim, nose waggling up and down. Is the Ka-50 only an autopilot trim helicopter with dangerous corrections? I expect some more joystick action just like Battlefield 4 but then you're likely to crash. Seems there's no pilot at all in this helo, only an autopilot that trims… What about the turning rate of all the aircraft, you almost can't roll and pull back on the stick at all for a sharp turn. My Thrustmaster T-Flight joystick responds well and trim is working which isn't the case with my Logitech G940 FF joystick. The latter doesn't seem to be supported by DCS anymore! The trim button just ain't working. It's not centered either with A-10c and only works fine with the Su-25T. I enjoyed a training flight with the Ka-50 this morning after turning on MSAA+SSAA to high which I somehow had forgotten, and had beautifull graphics in DCS 2.5! It still has long loading times first time and ocasional stutter and needs to be optimized.

I owned the Blackshark 1 to Blackshark 2 module which required an installed and activated Blackshark 1 first. Now I found an option in my ED profile to REPLACE both the serial number of BS1 and the BS2 upgrade to a full BS2 UPGRADE serial number which doesn't need to install Blackshark 1 first. I don't know if the Blackshark 1 serial number is still valid for play? Also the new serial number for BS2 isn't mentioned anywhere in my profile, fortunately I copied it at once after REPLACE. Can ED take notice of this, and don't forget to update the Logitech G940 Force Feedback stick as it is not centered anymore (with the A-10C). Also the 2.5 version is poorly optimized yet, long loading times the first time. Does someone know ED's email address for sure?

Sorry, I forgot to mention I found a correct older version of the LGS5.10 but it didn't help with the DCS 2.5 center stick problem.

Hey, has anyone noticed that the Logitech Gaming Software 5.10 has become corrupt too with a lousy calibration menu? THEN you know what I mean...

I understand you don't understand what I mean as a bot. No Problem I'm used to that as the only human in this botworld. No, the G940 does not center properly in 2.5 and Yes, I have adjusted the controls. Actually you can't fly most planes with the G940 in DCS 2.5. Too bad because I own 2 G940's and my Thrustmaster which has no problem with centering has too few options.

Although I had no problems with 1.5 there's a serious problem with centering the stick with the G940. Even large deadzones won't help to overcome this problem. The A-10C definately has a problem, the SU-25T not. Btw. Like the entire automatization there's no control and DCS seems more like an automatized updated project today with no one there. It's only bots that play that game. It's Obvious that problems and stupidity seem to rise automatically that way. Of course no one knows besides me playing those stupid bot games. :pilotfly: The internet is poorly updated compared to the past but what do you expect otherwise? The bot doesn't need much

I was tryin to configure my G-940 for DCS world when I noticed you can't configure the three trim buttons on the joystick. The left trim slider however does respond ingame and is very sensitive to roll movement. I can't turn this annoying feature off either. Does anyone of you have a similair problem and/or came with a solution?