Jump to content


  • Posts

  • Joined

  • Last visited

Posts posted by humptydumpty

  1. Try decreasing/increasing distanced of sensor for magnet and/or increasing filter value.


    The Allegro 3144 jumps around even without a magnet , but i will try what you said.


    Thanks again.

  2. What is strange is that in MMjoySetup the USB name are "MMJOY" in your picture:




    So Windows don't should see as 'MMJ-reset" anymore.


    BTW - In MMjoySetup you can't use Arduino pins codes, but the equivalent set in firmware:




    So in MCPU Port instead "A3" select "F4".



    U r a genius :) thanks, it worked. :thumbup: Have a beer or two :)




    The MH 481 sensor seems stable , the Allegro 3144 keeps jumping.




    Now i just need to figure out how to connect it to the pedals :) all home made.




    Think i will use a ball bearing and stick it and put the sensor in the center so only the outer portion of the bearing will move where the magnets will be connected.



    M trying to make an anti torque pedals for the helis. Could be good also for the fixed wings.



    Would love to do a similar thing for the cyclic , for the cyclic i am using an arduino R3 with the MPU 6050 , though for the helis its perfect but it needs to be calibrated all the time.



    Will do the same for the collective , the collective is using a Mega with a pot though its very stable but i can then use the R3 and the Mega for something else.

  3. The status still "MJ-reset" (blank), hit the button "Save settings to device" and after LED blink do a "hard" reset, unplug and plug USB cable.







    I have already done "Save settings to device" and did it again but the LED does not blink. It's the same on both the Pro Micros.



    Also unplugged and plugged it in.



    This what i see in Devices and Printers







    That Axis just doesn't move, gave VCC / GND / Data to the right pins on the pots and also on the sensor , the Data pin i used on the Micro is A3

  4. @Sokol1_br









    I have flashed using the latest MMJoy2 from sites.google.com




    in Devices it will show the device but the axis won't move.




    I have A3 for the sensor and also the pots



    Only have assigned one axis right now for testing.

  5. You did the flash right, so you see the "MMJ-Reset" that is a blank(empty) joystick controller without axes and buttons.


    Now you need use MMJoySetup software and set how many axes will use (pedal is typically 3) and 0 buttons, can set too custom name, custom VID/PID, after hit "save settings for device", and after reboot - see the LED on MMjoySetup changing color, your new controller became visible in Windows Game Controllers and games.


    If will use ordinary Hall sensor in analog (voltage variation) mode, select "IntSensor" in source.


    Set too what pins in Arduino will use for axes inputs.


    See in this video:


    AH thanks, i could get the joystick under windows devices , but the sensor does nothing if i use the magnet , the same sensors work on the logitech connector but it's spiking.


    Think i burnt the MH 481 sensors on the Pro Micro :cry:


    The MH 481 has VCC Data GND


    The Allegro 3144 has VCC GND Data


    Yes these are not the standard sensors used by many. The MH 481 had worked when i tried it long back but then i had no time and with this lock down thought retrying it.


    Gonna tinker some more.



    Connected a Pot but even with it there is no axis movement and i have setup the axis for it , the same pot works on the mega , i have two pro micros and the result is the same , so hall sensor and even with the pot its not working.




    The LED on the Pro Micro remains GREEN even after rebooting / unplugging it doesn't change. Also tried a toggle switch but even that is not working.

  6. Hi,


    I am trying to setup the pedals using hall sensors and a Pro Micro, flashed the Micro with the MMJoy setup and shows up as a MMJ-Reset device , but on double clicking the device in Devices and Printers (joystick) it says its disconnected , The hall sensors that i have are the MH 481 and the Allegro 3144.


    Any help appreciated.

  7. There is some MP connection timer in todays update, for me connecting to MP still no luck , guess 16GB don't cut it anymore. Board doesn't support more than 16GB. damn.


    Or maybe my 2GB VRAM is now of no use even at low resolution for textures.

  8. It's probably not a memory leak, more just poor memory management. They are two different things. Hopefully it is the latter as memory leaks can be extremely hard to find. The reason behind me saying it's probably not a memory leak is that a vast majority of people are fine and hardly anyone else with very large RAM capacity are having issues. If it was a leak then even people with 128gb would eventually crash. By the way, I'm on 16gb DDR3, i7 4930 and a 1080. I can load into all of the large multiplayer servers just fine.


    Apologies if I come across as a dick in this post, it just bugs me when people throw around the term 'memory leak' just because they ram usage is high :)


    agree it seems to be a management issue , either vram or ram .

    • Like 1
  9. Hey guys, this is a private contract map, and not intended for

    distribution at any time. Sorry for the confusion.




    any screenshots ? just to see what it looks like !

  10. I checked after I saw this thread last night, and the Paris map/server was online and password protected with 2 clients on it. Think it was something modded cause you could choose an Alpha jet. Probably something Paris airshow something?


    Yep that's what it was. When i clicked on the server it asked me to purchase the module.

  11. I suspected photoshopped image here... What are you trying to achieve by that?


    What nonsense , photoshopped lol , i can send you the original screenshot which is still on the desktop ?

  12. It's been almost a year since i have used DCS i think. Mig21 was the most flown module by me.


    About the landing , my approach speed was in the envelope of 380-400 Kmph with flaps to landing config maintaining the glideslope , on the threshold the speed reduced was to around 320 and i would kinda let it glide before touchdown at 320. I do remember i used to idle the throttle.


    Correct me if wrong.


    Been using DCS again since the last couple of days and don't remember much now of the 21.


    Was stuck on to the Bell 412 of X-plane.

  13. I can start in SP but when i connect to MP after a few minutes of the loading screen DCS crashes and i get the DXdiag dialog appearing.


    so the dcs crash dump is there.


    This is since the last two updates , was working fine on 8gb.


    Guess time for 8Gb more.

  • Create New...