Showtime100

2019. 9th of July on DCS V2.5.5 Brief guide about How to use JTAC on KA-50 1. install "JTAC Coordinates in Lat/Long [uPDATED]" with JSGME prior to "JTAC ka-50" https://www.digitalcombatsimulator.com/en/files/3304451/ Note : in lat/long , you can find 2 types of mods (DD/DMS), which doesn't matter. just pick one of them. 2. then install above "JTAC KA-50 V1.6" with JSGME 3. then you can see the UTM,lat/long being bracsted together in your JTAC communication.

Same problem on me too eventhough i have successfully used IRMV on AV-8B several times, Using DMT or TGP, but sometimes it just couldn't be launched eventhough i press uncage IRMV -> Sensor Select FWD to IRMV -> TDC action several times. including above problem, i think AV-8B has extremely poor quality & lots of bugs.

i am sorry for my broken link. actually it was my first time to use google drive, i might make a mistake. can you try this link again? https://drive.google.com/open?id=16h-AxmYG5wlX7Dwqv8EQoBqiPW5OZvGF https://drive.google.com/open?id=1Y75vPn4XnKpcuzZKLzZtDQxj7lYI0crB

for those who have a problem in shooting AS30L in Mirage F1CT, i just found that there is a little key binding problem & i just changed input files just little bit as below 1. AS30L 1) Please save below file as "default.lua" in your C:\Users"your account name"\Saved Games\DCS\Mods\aircraft\MirageF1CT\Input\MirageF1CT\joystick folder, as replacing pre-exigsting file. https://drive.google.com/open?id=1Y75vPn4XnKpcuzZKLzZtDQxj7lYI0crB 2) Please save below file as "default.lua" in your C:\Users"your account name"\Saved Games\DCS\Mods\aircraft\MirageF1CT\Input\MirageF1CT\Keyboard folder, as replacing pre-existing file. https://drive.google.com/open?id=16h-AxmYG5wlX7Dwqv8EQoBqiPW5OZvGF 3) Then go back to your dcs client & assign keys for "laser ranger on/off", "electro optical system on/off", "night vision (FLIR or LLTV) on/Off" "Target Lock" "Weapon fire", & shoot the missile as same as you shoot the kh-25ml or kh-29l in su-25t 2. LGBs even though we can desiginate the target with laser correctly by solving "key binding problem" as described above, Shkval targeting system installed on su-25T (& Mirage F1CT) provides very limited view range in vertical direction, which means you will lose your laser desigination as you fly over the target & gbu will be mis-guided. ----------------------------------------------------------------------------- Link Edited in 19th, Jan, 2019

Oh, i am sorry. i was confused. Please have a great day

Dear Arthipex, i am huge fan of this mod ever since a first version, & i am appreciating for your contribution for this mod, succeeding Home Fries. with regard to above Ver 1.6, everything works fine, except the coordinate is brocasted in form of UTM, Not L/L, which ka-50 is not compatiable with. unfortunately i can't convert the coordinates to L/L. would you let us know, if there is a good remedy for this issue? Thank you.

For those who have a problem in loading (halt at 10% after applying this mod) (only tested on 1.5.8, ka-50, JTAC only - i don't know if this is working on 2.2 or MI-MTV2 or about AWACS) 1. Download latested 1.5e version in following link (DCS hompage -> Downloads->userfiles) https://www.digitalcombatsimulator.com/en/files/1874700/ 2. unzip it & DELETE "me_action_db.lua" in following position "your JSGME mod file folder\JTAC & AWACS for Ka-50 & Mi-8 (Main)\MissionEditor\modules 3. apply mods with JSGME 1) "JTAC & AWACS for Ka-50 & Mi-8 (Main)" first 2) "JTAC & AWACS for Ka-50 (Module)" I wish this tip might help you. Thank you

Coordinates Mismatch Issue in Nevada ! first of all, i really appreciate "TurboHog" & "St3v3f", "Home Fries" for this great mod. i have used this mod since its earliy version & it have worked great until DCS 1.5, but as i am migrating my DCS version to 2.0, coordinates broadcasted by jtac doesn't match with actual ones, which can be verified in F2 view. (test has been done only in ka-50 module, because i don't know how to communicate in mi-8 even though i have it.) i have tried in both ways as follows 1. 1.5d by Home Fries, downloaded from DCS userfile only 2. 1.5d + St3v3f's tweaked version. Broadcasted coordinates : N37.19.957 E -116.(0)4.539 Actual coordinates : N37.19.57 E -115.55.27 it would be really appreciated if you could leave a single clue for me. Thank you.

[solved] Thank you st3v3f Thank you st3v3f, i can fix the frequency correctly in Mission Editor according to your advice, and i just check that it works fine. Thank you, have a nice day.

(I have searched some threads regarding radio issues, but i couldn't find a right one having a same problem as i do. so forgive me for starting a new thread) I've used "KA-50 JTAC MOD " (http://forums.eagle.ru/showthread.php?t=93228), which makes black shark use a JTAC function, through R-828 VHF 1 radio in 1.2.X and now i just installed 1.5.3 on my computer & found that a VHF 1 radio doesn't work all. i set a frequency of a stryker IFV as 31 Mhz (am/fm both) with reference to following file. C:\Program Files\Eagle Dynamics\DCS World OpenBeta\Mods\aircraft\Ka-50\Cockpit\Scripts\R-828\R-828.lua then made the stryker transmit a message in form of wave file, which sounds perfectly fine through R-800 VHF 2(am/fm) radio. is there any one else having a same issue? it would be really appreciated if you give a little hint or tip for this issue.

Thank you for your mod and simple trouble shooting. Dear TurboHog. Greetings from South Korea. I think that your mod is one of the most brilliant mod that i ever saw, and i am really appreciating for your work. now i am enjoying your mod on 1.2.3 and it is really great. ^ ^ during installation (i installed this mod manually without any other program), i had a same problem just as "mastiff" experienced, which is that no communication menu on screen when i pressed "\" button. i tried the same way as you wrote in end line of "#16", but i couldn't find the "keyboard.lua" on my dcs folder (now i know that file belongs to save game folder, not dcs folder). but i resolve this problem simply by modifying options. OPTIONS->CONTROLS->KA-50 SIMS, RADIO COMMUNICATIONS-> clear the key (normally "\") assigned on "COMMUNICATION MENU". then, re-assign the key on OPTIONS->CONTROLS->KA-50 SIMS, Ins Cyclic Stick->SPU-9 PTT. that's it. it works perfectly. i hope this simple tip would be helpful to other people. once again, THANX TurboHog.