Jump to content


  • Posts

  • Joined

  • Last visited

Personal Information

  • Flight Simulators
    Dcs World
    Dcs A10C
  1. Watching a show video about the anatov an-22 and lo and behold they landed at tiblisi. Got some screen grabs that i'm sure you'll recognize. the three fuel tanks are right where you'd expect them, and the lake after takeoff. really good job on the game from eagle dynamics, even saw the smoke rising from a stack.
  2. US Air Force to keep the ugly, deadly, and uniquely capable A-10 in the air US Air Force to keep the ugly, deadly, and uniquely capable A-10 in the air through 2022 http://www.extremetech.com/extreme/222536-us-air-force-to-keep-the-ugly-deadly-and-uniquely-capable-a-10-in-the-air-through-2022?mailing_id=1564284&mailing=whatsnewnow&mailingID=DF3D2B23AE4089CC36C1EA625934BA55 Still keeps on going.:thumbup:
  3. Same thing as repair dcs world.
  4. What? Recommended to do so? Where? Here's a link for a10c mission you can install your self. and they are free. http://www.digitalcombatsimulator.com/en/files/?arrFilter_pf[filetype]=&arrFilter_pf[gameversion]=&arrFilter_pf[filelang]=&arrFilter_pf[aircraft]=60&arrFilter_DATE_CREATE_1_DAYS_TO_BACK=&CREATED_BY=&sort_by_order=TIMESTAMP_X_DESC&LICENCE_FREE=yes&set_filter=Filter Get your game from eagle dynamics. http://www.digitalcombatsimulator.com/en/downloads/world/stable/ then install the a10c module into it. There is a repair game button in the programs folder that checks for bad or missing files.( this is if you already have it installed). this is what i see when i hit training, then a10c in modules
  5. Hi, You made need to bring the sensitivity down a bit in your pedals. I had to introduce a dead zone and change my curves so they were not so touchy. If you do an outside view on the tarmac and engage nose wheel steering you can move the pedals and see how much travel you get both ways. i also had a habit of overcompensating one way then the other oscillating over the runway.
  6. Its a good gimmick. Like monster cables for better"signal". http://www.cnet.com/news/are-curved-tvs-a-gimmick/
  7. Hi, Does the dcs a10c show up in your installed module page? You can go to dcs world and download the module separately.(http://www.digitalcombatsimulator.com/en/downloads/modules/dcs_a10c_warthog/ ) Once it is "installed" then you can activate it from your module manager,using the installed screen. You have to log in to get that to work.
  8. Hi, There is a module manager in dcs world.It lets you download and activate different modules into dcs world.There is an account login at the top of the right corner that lets you get into you DCS account. Your serial from steam will be fine in the standalone. That's what i did. I recently did a new build and reactivated my modules by logging into the module screen.
  9. I finally went ahead and built a new rig. Best thing I've done for myself in a while. New Specs: CPU: I7 5930 oc to 4.4ghz board: rampage 5 extreme x99 ram: 16gb gskill ripjaws ddr4-3000 GPU: Asus gtx 980 strix Cooling: corsair h110i gt case: phanteks enthoo pro OS drive:Intel 750 ssd 400 gb pcie nvme ssd: samsung 850 evo 1TB psu: Corsair ax 1200i sound: asus sonar dx Os: Windows 7 professional 64 The only thing i haven't upgraded yet is the monitor. I'm still using my 1920 X 1200 samsung sync master 2443 bw( 60MHZ 5ms). The previous specs: CPU: I7 920 oc to 3.6ghz (couldn't get any higher and stay stable) board: rampage 3 extreme ram: 12gb mismatched ram GPU: 2 amd 6970 crossfire Cooling: Cooler Master - Hyper 212 Plus case: antec P182 OS drive:vertex 120 gb ssd psu: Corsair ax 1200i sound: asus sonar dx Os: Windows 7 professional 64 I couldn't get above 60 fps on the ground parked with this one, and it got lower if i looked around down to 20fps.Normally 20 to 30 in the air. The new on with everything on hits 120 sitting, and a 60 to 70 in the air. I've limited the fps to 60 fps to avoid stuttering and tearing and the game is butter smooth. It is still amazing if i down sample from 2560X1620 for a sharper experience.(only problem is it does this for all monitors on the card, so if you have one for mfcd you have to be careful as the screen size will change) With the cooling in place the CPU sits at 30 Celsius idle. I haven't seen it get above 60 in game play. The fans gpu doesn't even turn on till it hits about 60 and i haven't seen that reach past 69 while gaming. It is a lot quieter and cooler than the hot 920 and hotter 6970"s. The only thing i might change is replacing the case fans with 4 pin ones so i can ramp them down when not in use. I spent a lot of time trying to optimize the game to get playable rates. Upgrading sure did that for me.:thumbup:
  10. rtfm hi, i read the ....... manual. It's all good. figured it out.
  11. hi, I'm going to be making a new system from the cpu up and i was wondering what the correct steps are to ensure i dont screw up my installs. I have 2 modules installed now, dcs 10c and huey. Do i need to deactivate them first? (and how do you do that) and will i lose all my stats? or is that stored on the dcs server? and if i deactivate it and then reactivate it on my new system, will it need the keys again? Thanks
  12. Janes f-15 janes ah64d longbow janes longbow2 janes ah64d longbow gold
  13. this is for mustangs terrain,i made the file structure in a folder i called mustangs terrain, in the_MOD folder, and unzipped the terrain modes into the vfxtexture folder. and i copied the high lua into the config/terrain folder. the folders in the vfx texture folder are just the un zipped files.They unzip in their own folders.I do it this way. 1._MOD folder 2.ADD Mustang Terrain folder in _MOD folder 3.ADD Two folders in Mustang Terrain folder---Bazar and Config 4.In Bazar Folder:add Terrain Folder---In Terrain folder:add vfstextures folder-----Put All land textures in here 5.In Config folder:add terrain folder---copy high lua here You can see the difference with it off and on, in jsgme. Hope this helps in some way.
  14. Hi, This isn't a problem for me, i just did it once in target. When i reboot it stays off.
  • Create New...