Jump to content

mibo

Members
  • Content Count

    93
  • Joined

  • Last visited

Everything posted by mibo

  1. I am an owner of Rift S. As I heard only positive reviews about the G2 especially concerning sharpness of image I bought one and compared the two. (I am not considering price and Facebook..) Rift S + 1. Easier to set up nothing to tweak around. 2. Much better sweet spot. Just put it on and it is ok. You can look at the Hud and without moving the head you can glimpse and read an instrument. 3. Average temperature in gaming (I am in a tropical country) 55°C. Reverb G 2 + 1. A little Lighter to wear but must be adjuste correctly 2. Better sharpness - disad
  2. Thanks Flappie and Bignewy I have cleaned my corsair I 860. It (This was suggested by DCS) wasn't dirty at all. Installing it with all cables, then the issue resolved, No more crashes. DCS said also to lower 50-100 MHz the Core Clock as in Window Event viewer I had Kernel power errors.. Then I looked at my rtx 2080 ti which is factory overclocked and I set through Mis Afterburner a lower core clock by 57 MHzMy Gpu temps are about 83-84 Centigrade (I am in a tropical climate). Then I tried to switch again back to my oculus Rift S where I see that my termps are no more than 55C. So I do no
  3. Thanks Bignewy, As said there are no log files nor crash files probably because the system can't record anything as the game cannot start. Maybe my corsair 860i has not enough power. I cleaned it but it did not need it. My graphic is a fabric overclocked gigabyte 2080 ti.
  4. When this happens no crash files are written therefore I cannot post them. Made the long repair and it remains with the same issue. Have only followed Thud's VR4DCS and downloaded Shader settings. DCS told me to change the DCS folder in Saved Games to Temp. This resolved the first problem I had that it did not load. The small DCS logo at startup became completely black. After doing this change with the TEMP it loads the game e.g. free flight but before I can click fly the computer stops and reboots. Note that this does not happen with other games as Sturmovik or Aerofly Any he
  5. Hi, Want to enable reprojection. Therefore I need to change some settings in Program Files (x86)>steam>steamapps>common, see only 2 files eg: Steam VR and DreamWorks Shared! There should also be: >MixedRealityDriver> Resources>Settings. Therefore I cannot enable Reprojection and make the correction with notepad++.
  6. i7700k not overclocked, 32 memory, 2080 ti Not found out yet best way to start DCS for G2. Loading the game it stutters a lot, then once opened it is ok, but a) I find clarity less good than oculus rift S, it is a little a foggy picture. b) Sweet spot is smaller than Rift S c) Have not found how to reset view (Have made sitting setup only) Comparing it with the Rift S I could not say that Reverb G2 is better.... any idea ?
  7. mibo

    FAQ

    If your commands are not being recognised have you done voice training (page 39 of the manual)? This can take some time but will make a huge difference If the Finish button is yellow then it is always a good idea to press it and follow the steps that are given in the message that appears. Away from PC - sent using Tapatalk Yes I did voice training in Windows and at least 3 times in Vaicom pro. The only words not recognized are the airport names I can't pronounce correctly. Also French names I tend to pronounce as french as I speak and write 5 languages, are not recognized unless I p
  8. mibo

    FAQ

    Hi Hornblower, thanks for your reply. I cancelled everything and installed all new. Now PTT recognizes aircrafts but when I try to speak my commands for example in F5 cold start it does not recognize my commands. Maybe once of 20... the spoken command is listed correctly but a yellow mark says unrecognized command... Have not clicked on the FINISH button on Editor as I suppose this has to be made only if adding new commands. Opening Pencil dot I can see all 526 registered commands a from AAA to Yunga then a few more as Link TunemMap marker,Radio Tune, Tacan tune finally *Chatter* and Transmi
  9. mibo

    FAQ

    PLEASE HELP No aircraft registered in PTT Have installed Voice Attack and VaicomPro. No aircraft are listed in the Vaicom Pro PTT tab. It shows: "- - - - " and on the PTT green screen there is a "blinking BCN" Have deleted the Export lua file in DCS> Scripts in saved games. Have not used the custom DCS path in Config tab as I am not sure which folder to select. My game is in DCA (A)driver. Should I just select this one or any more subfolders? Think that even this will not be enough to solve the issue. Have also disabled NS 340 module in DCS and made Repair. Sorry if this is not the righ
  10. Have ordered gloves a year ago. Now they say that DCS made an update and since that they do not work anymore. SENSORYX awaits a new update from DCS. Have also sent a ticket to DCS and they said to me they to await their answer. If the gloves work and DCS made the update I'll let SENSORYX send them to me, as they can ship them now. If DCS doesn't make the update I ask a refund. They are about 600$ not 1200€ as written above. As soon I have an answer from DCS I'll post it on this site.
  11. HI MAXsenna, Please find attachment of my TacviewGameExport.lua and see if you can help me TacviewGameExport.lua
  12. So what exactly should I do? Several people have the same problem 1kb files with stationary bullsey only
  13. Have downloaded correctly Tacview and it installed but trying 3 single missions aircraft are not registering. 1. In tacview USB file the missions are there but only 1 KB .zip acmi files. 2. IN User>Saved Games> DCS>Tracks - the same missions are registered. 3. Clicking on either of them a strategic map is shown but paused with no aircrafts of the mission only Bullseye. The Map Title says This Strategic View is available in Tacview Advanced. I have only downloaded the Standard paid version. Have found one user in Dcs having the same issue but no solution to it, the same goes wi
  14. Tacview records only 1kb stationary bullseye only no flight records. What should one do?
  15. Hi, Have a strange problem with F18. During missions or also during training missons the game starts auto stop or auto start randomly without touching any controls. This happens more frequently after I have downloaded Open Betacarrier. In fact I can't repair or upgrade Open Beta. Then doing so everything stops and even game' direct access disappears as if the M2 driver stick would become loose. Can someone please give me a solution? I do not think that I can uninstall open beta as I think it is connected with the game. Should I reprogram all F18 hotas or even on Drive C user file saved game
  16. The above setting is not working. Sound is distorted and has some echo.
  17. Hi to all, PLEASE IMPLEMENT SENSORYX GLOVES and make that all or at least the principal buttons work for coldstart and important flight procedures in all aircrafts. This system is much better than Capto Gloves although expensive 650 Sfr about the same amount in US$) I know that DCS wants to implement them but they should speed up the work. This is an absolute must for VR gaming and adding immersion. PLEASE EAGLE DYNAMICS. See video: PS:. If this is not the right site to post please someone forward it to the right person BEST THANKS
  18. Hi to all, PLEASE IMPLEMENT SENSORYX GLOVES and make that all or at least the principal buttons work for coldstart and important flight procedures in all aircrafts. This system is much better than Capto Gloves although expensive 650 Sfr about the same amount in US$) I know that DCS wants to implement them but they should speed up the work. This is an absolute must for VR gaming and adding immersion. PLEASE EAGLE DYNAMICS. 2::clap_2 See video: PS:. If this is not the right site to post please someone forward it to the right person BEST THANKS
  19. Hi 1. Want to set up Buttckicker Gamer (old one not II) with 2.Simshaker for aviators and add on module version 2.12 3.with Voice Attack, 4. Voicdmeeter banana, all for especially DCS World Sound hardware: a) Realtek high definition from motherboard b) usb headset and micr. -c) Oculus Rift S VR, d) other usb mini for buttkicker only as Dojo described onJan 31 2018. As I am new to all this technical stuff and reading Voicemeeter manual is for me "chinese" Would like someone explain exactly the best and simpliest way for setup possibly with images. Have put the Realtek speakers (2 + woofe
  20. What you say is true. I partitioned a 500 Gb ssd because I wanted at that time the OS and DCS on the same ssd. Now I need more space for OS and especially DCS. I followed what you say above but it did not work for me. The strangest of all that dcs can't install as it always says: Can't create directory L:\Temp\Windows 10\TMP\DCS: (3). . I have no L drive. Time ago it was a DVD lector. But it is disconnected. No one knows how to fix it not even DCS Support. As I said I cannot even install from scratch on my other M2 ssd as explained. So probably I have not only to install DCS that is not
  21. Dcs worl copy/paste from old ssd to new ssd Ok, still no solution. Could wipe out F from old ssd and the remaining 9 Gb; It had a page file. I removed page file and then I could cancel the second partition. It is now named unallocated. Cannot extend the first partition (window 10 OS) as it created by itself a space on the right. Therefore I cannot use the unallocated space for window. I RECOMMEND NOT TO PARTITION DRIVES WHERE THE OS IS ! Game is still not working it does not search for updates and now does not even open. Dos support has given me a list of 11 points to go through. I will
  22. It works but not 100%. When opening dos it works but it does not look if there are updates. Any idea? Thanks for reply.
  23. Thanks to all. Cannot change the letter to F. The old sad had two partitions: the first ©for the OS window 10. The second (F) for DCS. I deleted the files on F but somehow there are about 9Gb left when I look Disk Management. Cannot detete F letter as somehow the system protects it. It is grayed out. Any help or suggestions?
  24. Yes window is intact on the F drive. The F drive has a partition one for window 10 and the second for Dcs world. The second part has been copied and pasted to the new ssd E. The second partition has then been deleted.
  25. Hi, Sorry have looked at forums and on internet and have not found a detailed list of procedures. Have installed new ssd and wanted to copy and past dcs World from the old ssd (drive F) to the new one). I did the following: 1. Copy and Paste the game from F and installed it to E 2.Opened game folder and looked for the exe file (created a shortcut to put on Desktop. (Path is E). 3.Uninstalled, deleted the old drive F game. Have not changed Registry but looked at Regedit (HKEY_CURRENT_USER\Software\Eagle Dynamics\DCS World) there the path shows the old drive:(F:\Program Files\Eaggle Dynam
×
×
  • Create New...