Fishface68

Yes turns out it is a bad DIMM, it runs fine on three of my four 16GB DIMMS, Board slots are all fine. MS Memory Test was a complete waste of time! Many thanks for all of your help! Best wishes Pat

Ok uninstalled and reinstalled using DDU in safe mode, now with 457.30. I have the same issue DCS runs for a few seconds then freezes and crashes to the desktop. log file attached. dcs.log

Ok I uninstalled the latest Nvidia driver 497.09 with DDU in safe mode and reinstalled the driver without Nvidia experience. It is still crashing but now just crashing to the desktop so no crash logs yet. I will try to install the previous driver that I was using 457.30 and see what that does.

Ticket raised and crash dump sent with ticket ref. Thanks for the reply I will try to uninstall and reinstall the driver. I have tried this already using DDU but I will try it again and report back Many thanks P

log files added to the original post I will raise a ticket as requested. Many thanks P

HI All, I am having a nightmare getting DCS to run. I have been using DCS no problems in VR with an HP Reverb G2 all ran fine with no issues. I decided to install and M.2 SSD and put some more memory on board Upgraded from 32GB to 64GB (4 x 16GB DIMMS from the ASUS AVL) and since then DCS crashed shortly after I launch the game. I have set up my PC to dual boot so I can separate games from everything else so I have two instances of Win 10 one on each HDD. I have installed 2.7 (not open Beta) and that has the same issue as 2.7 Open Beta. I still have it installed on both drives and it has the same issue in both. I have tried all of the troubleshooting advice that I can find on the forum. I have changed the graphics driver to the latest version. Installed the latest chipset drivers. checked all of my other drivers. I have run and memory test with no issues. I just don't know what to try next? I have attached the full dxdiag text file. system info and diagnostics are as follows. Please Help!! System Information ------------------ Time of this report: 12/21/2021, 12:42:43 Machine name: DESKTOP- Machine Id: {} Operating System: Windows 10 Pro 64-bit (10.0, Build 19044) (19041.vb_release.191206-1406) Language: English (Regional Setting: English) System Manufacturer: System manufacturer System Model: System Product Name BIOS: 1302 (type: UEFI) Processor: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz (8 CPUs), ~4.2GHz Memory: 65536MB RAM Available OS Memory: 65474MB RAM Page File: 14706MB used, 67152MB available Windows Dir: C:\Windows DirectX Version: DirectX 12 DX Setup Parameters: Not found User DPI Setting: 288 DPI (300 percent) System DPI Setting: 288 DPI (300 percent) DWM DPI Scaling: UnKnown Miracast: Available, no HDCP Microsoft Graphics Hybrid: Not Supported DirectX Database Version: 1.0.8 DxDiag Version: 10.00.19041.0928 64bit Unicode dxdiag.txt dcs.log-20211221-124238.zip dcs.log

Does anyone know if there is a way to have the altimeter in feet rather than metres? I am mot worried about english labels but if possible it would be good to have the altimeter in feet and the barometric scale in inches or hectopascals

It did take a lot of work, more than I expected but I am really pleased with the results. It needs some tweaking but It looks pretty close!

ok so I worked it out. Here's the result.

I have started to create a livery for my Yak 52 and I am fine with the graphics element but I am not sure how to configure the .lua file so that I can see the livery? Is there a tutorial that would explain how to create a livery from the DCS downloaded template. I have saved the graphics file as a .DDS file by the way so that isn't the issue. Many thanks best Pat Ok so this is what I have so far So far so good. The only issue I have is that the missing text pixelation is showing through. Does anyone know why it is doing this? what have I done wrong?

This is over rotated, you wouldn't want to do this in the real aircraft. The procedure for take off is trim set for take off (which is slightly nose up) 70% on the brakes, release and smoothly open the throttle. Hold the stick aft of neutral and keep her straight with the rudder. nose should come up at 90, off at 110/120, hold the attitude for positive rate, gear when out of runway. throttle to 800mmHg prop 82% trim for 170kmh and climb away keeping the ball in the centre. I have a good illustrated flight manual that was translated from russian if that would help?

Hi There I would like some help creating a scheme for my Yak52. I have seen some of the amazing skins that people have created and I would like some help working out how to do it. The Scheme is for G-IUII S/N 9111604 picture attached. **I almost forgot it now has a three bladed MTV9K propeller how can I change this also? Many thanks Best wishes Pat