Jump to content

Bungle_uk

Members
  • Posts

    228
  • Joined

  • Last visited

Personal Information

  • Location
    UK

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Most likley a Gain/Contrast issue on the MFD itself. If you haven't already, try messing with those. Also, under special settings for the harrier, you can pre-set these to certain values. However I personally find that I need to significantly reduce gain for the EHSD and increase it for the TGP/DMT
  2. They rotate around the Tail plane actuator. Since there is more weight behind than in front, they get pulled down to the position you see above. Again, should point out I have not worked on the aircraft or anything like that, but have seen similar effects with other hydraulic equipment ( forklift, JCB etc..) Its not something you will see in movement as it is very slow and can take days to get to full deflection.
  3. Not 100 % sure but its possible the weight pulls them down over time when there isn't sustained hydraulic pressure due to the system not running. This happens with most hydraulic systems.
  4. You have a invisible farp available as static object which should also also work in MP. You still need to add the 2 units for refuel and rearm I believe. Truck M939 Heavy and refueler M978 HEMTT.
  5. Iron Mike has confirmed this is a bug. The sweep is not going into Emer and getting stuck, its just showing you that it is via the flag. It should still be possible to move the wings with normal wing sweep operation either auto or manual assuming your not outside parameters (too high Mach)
  6. Well. I always thought that was just to enable the controls overlay display but apparently not. What's weird is I have never had this issue before and hadn't changed anything. So yeah, problem solved thank you admiki
  7. I did have a look in there but never noticed anything. Ill take a look when i get home cheers.
  8. Bit of a weird one this and its only affecting the Hind. Petrovich (I think) is applying cyclic and rudder inputs to my aircraft while I am in the pilot seat. In the track provided, at no point do I apply anything other than collective inputs. You can see as soon as I enter the pit, the cyclic is back and right. As I add collective, both rudder and cyclic are applied from somewhere but it isn't me. At first I thought it was cross controls but no. Also tried a full repair but with no luck. Any help appreciated. Petro auto.trk
  9. I see. Looks like I need to find another way then. I have done some experimenting with the percentage value on the unit itself which seems to work better for my needs. Thx for the responses. Its more clear to me now.
  10. When setting random as a condition for trigger, it is constantly re-evaluated as if it were a continuous action even though the trigger is set to "once" In the mission and track provided, there are 2 triggers: First is set to "Once" "Time more, 10 seconds" and "Random, 1%" with an action of message to all 1 Second is set to "Once" "Time more, 20 seconds" and "Random, 1%" with an action of message to all 2 What happens is a message of "2" appears around the 2 minute mark and a message of "1" at about 2:20 This suggests to me that the conditions are constantly evaluated instead of just once at that time. Reading the manual, that's not how it should work it seems "RANDOM. The Random condition allows you to set a percentage chance of action(s) assigned to the trigger from happening. Use the left and right arrows or type directly into the field to adjust the value. Values can range from 0 (no chance) to 100 (certain) as a percentage. The most common action you will use this condition with is Activate Group. This will allow you to set a random appearance of units in a mission." testrandom.miz random.trk
  11. Unit type SAM SA-3 s-125 TR SNR (SA3 tracking radar) is showing as SAM SA-2 TR SNR-75 Fan Song (SA-2 tracking radar) Both on the HUD and MFD RWR. Tested with other aircraft and is identified correctly as "3" on RWR sa3.trk
  12. I had a system with less specs than that. I5 3570K with 24gb DDR3 ram 7970 card and it ran absolutely fine (Both F14 and AV8B) Yes you will have to tone some of the heavys down (MSAA for example). Really heavy servers may be a little rough but for the most part you'll be fine n dandy. Both the F-14 and AV8B are well worth it at the current price.
  13. With the new option under special, this is now fixed for me. Thanks for looking into it :D
  14. A lot of steps there. Appreciate the guide but I think ill wait for a fix on this one. Until then the tomcat is grounded for me.
×
×
  • Create New...