tranquillity

as everyone keeps saying, AAR refueling is really not that hard, even I was able to pick it up, just by doing what people keep reiterating in this thread....keep practising and learn to work the throttle...there is no magic there, other than just doing it.

deactivating ACM with NWS button did not work for me, yesterday. This forced me to use osb buttons to leave acm mode, which quickly turned painful. Will try this again later, tonight.

+1 , great communications and constant heads-up updates..... Thank you @eagly dynamics and @wags

guys, he did not ask what acm mode is, his question was, whether it is intended behaviour, that acm gets activcated on weapon selection. It is a good question, as i also think it feels wierd, that acm is activated on selection. I want to press tms fwd if i want it, not have to deselect it every time after selecting a weapon..

Hello dear fellow DCS fans, i am currently in the process of slowly upgrading my equipment, and have just ordered thrustmaster cougar mfd's and a 11,6 inch screen that should be just enough do attach the mfd's with velcro to it and have enough space. I have a pretty good idea how i will have to set the display up, so that i can export mfd's to the screen in the right position- but what I have found no information about, is whether it is possible to easily swap the mfd's contents. As I have 2 mfd's + the respective screen real estate, but 3 mfd's in the hornet, I thought that it would be a nice feature to be able to have the left mfd behave like this: default mode : screen-> shows the left mfd of the hornet osb buttons of the thrustmaster cougar mfd -> bound to the osb buttons around left hornet mfd switched mode: screen-> shows the bottom mfd of the hornet osb buttons of the thrustmaster cougar mfd -> bound to the osb buttons around lower hornet mfd(with a shift button) The button issue will be no porblem, I think I know how to do this in the target software, so that I can select which mfd's osb buttons the thrustmaster cougar mfd has control over- but can an exported mfd be swapped through another mfd in the same viewport? Is this possible? Of course I will have to tinker with that by myself, when the stuff arrives....but I wanted to ask even before whether someone already did something like that? Regards, Tranqu

i updated from 1.5 to 2.5 a few days ago, and upgraded my pc at the same time, and had comfortable 50-60fps all the time, and the game looked great. then i read somewhere, that legacy settings and so on can cause problems, so i deleted anything mod-related, and renamed my dcs folder in "saved games"- and started the dcs_updater.exe with the repair parameter- did all the settings and key bindings again, and now have comfortable 80-90 fps all the time, and, be that placebo or not, the game seems to look even nicer. can highly recommend to do a reinstall.

Because win 10 is just overall superior to 8.1 Gesendet von meinem SM-G935F mit Tapatalk

Win10 Gesendet von meinem SM-G935F mit Tapatalk

Just read that one AMA with the real life a10c pilot, who said the hars is almost the only thing you don't really have to touch in real life :) Gesendet von meinem SM-G935F mit Tapatalk

I think the problem is underlying that the Walkman is played a airplane sound, and not as cockpit sound. You can find out easily if you open and close the canopy while playing a song. It has less to do with hear like in helmet and more to do with that I think. Gesendet von meinem SM-G935F mit Tapatalk

Alright Thanks! :)

Mustang, just a small Question: what does your modification of the FireVehicle do? I am thinking of using the https://forums.eagle.ru/showthread.php?t=119163&highlight=fire&page=7 mod, but it uses the same File and I don't really wish to mess things up. Do I break anything if I use that fire mod, or would you personally advise me not to? I feel like you have a good Judgement of these things :) [url=https://forums.eagle.ru/showthread.php?t=119163&highlight=fire&page=7][/url]

Really nice textures, they create a great mood:) Thank you for your work! Gesendet von meinem SM-G935F mit Tapatalk

So are there any news about this important topic? Wanted to host a game for a friend, but sadly we are both behind dualstack lite tunnels, which make it impossible to connect. Our isp make it a real pain in the ass to get actual dual stack(get business customer contract for 100 euros more a month). Is there some way to play with our working and nice ipv6 addresses? Pretty please? EDIT: Managed to get Hamachi to finally work after a good hour of fiddling. When it is correctly configured you can setup a server and have others join, even if you sit behind a NAT tunnel.

Even better would be if a short tap changes the pressure slowly, while keeping holding it accelerates the change. This would simulate turning the knob slowly for fine tuning, and then holding it to turn it faster to get higher intervals done Gesendet von meinem SM-G935F mit Tapatalk

How is that not clear? Commonly coordinates are entered es latitude / longitude, but the ck37 computer needs longitude / latitude. Coordinates in lat/longitude have 12 digits. X being 6 digits for latitude(left right on the globus), y being 6 digits for longitude(up down on the globus)1. So usually a coordinate is X:Y. The ck37 computer needs coordinates as LOngitude:LAtitude, so Y:X. Does this clear up things for you?

Did work for me aswell, did you remember to select ber after landing and then select the starting airfield again and switch to nav and then start? I could fire 04e's and 15s consecutively. Gesendet von meinem SM-G935F mit Tapatalk

Now this is splendid work, first put outa great module, then even go so far to keep people posted on coming/done fixes, telling them what the next priorities are....awesome! Great work LNS, will buy your stuff 100% of 100% of times;) Kind of sad that the rearming thing did not make it into the update, but next week it then, isn't it?

got the switching thing to work I have no idea what I had done wrong last time I tried. I can create bx8 and select it and it is fine. Only the missiles are bugged when reloading, I hope that will be fixed soon, because always requesting a new plane after landing is off putting. yet, probably the bx8 creation problem was probably my fault

I am trying to reproduce it right now. I got it to work in the editor, the reason my missiles didn't fire before was apparently me being too close to the target. Fingers crossed, will see if I can properly select bx8 now Gesendet von meinem SM-G935F mit Tapatalk

Went onto the server, started up the plane, went airborne, tried to press bx and 8, in akt pos Mode. Won't select the damn bx8. Will try to do a repair, maybe my game is broken. I did a test flight with the editor, I can create bx points there, still could not get the things to launch. I must be retarded.

airplane should be started normally, no warnings/ indications, good nav fix on start. if I want to launch them into an area i do: -switch data panel to IN and TACT. Enter 80 0002. Press LS confirm button thing -switch data panel to OUT and ACT/POS -press BX button + data panel button 8 //now in single player the dest indicator shows bx8. in multiplayer it doesnt. -press fix trigger to detent t1. select radar target with radar stick. press fix trigger TV. -set master mode to ANF. the small cross for bx7 gets displayed, at a ****ed up location. sometimes out of radar range and i have to try my luck to move it to the screen. -press DX + data panel 7. press fix trigger to detent t1. -use radar stick to move it between me and bx8. press fix trigger TV. - both positions are apparently stored, and displayed in the radio, the destination indicator does not show them though in multiplayer. in singleplayer it does. in mulitplayer it keeps showing for example b2. maybe i am actually moving other waypoints instead of the bx'es. -select ATK on weapon selector. wait until in range. the 2 switches on the right by the weapon selection panel are in the upper position, i want to fire both missiles at once. -when hud displays in range, remove trigger safety, hold down trigger -run into problems, like missiles not firing, or only 1 missile firing...and have no idea why can you help me please ? :)

I had this happen twice to me so far. Once, when I only fired one of the two x15 that I carried. Second time i was in full autopilot and then manually rolled out of it but somehow the autopilots input must have gotten stuck because the plane kept rolling and rolling. I think I fixed it by toggling autopilots on and off again multiple times

Bug in the simulations fuel control code, or in the real planes aswell? Is it a thing to switch to manual in reality? (Or was it a thing )

Is there an easy way for us players to reset the computer or something else, other than just switching into a new plane? I would love to use my rb04e several times :) Edit : until the fix is out?