The RDN Posted August 1, 2019 Share Posted August 1, 2019 Hi everyone, IR image rendering bug is still here (since months)… first picture TPOD in TV mode, second one in IR mode… very usefull :megalol: seriously don't tell me is not a gamebreaking bug… it's impossible to target Something near a "burning" area. Please ED do Something… thanks Link to comment Share on other sites More sharing options...
some1 Posted August 2, 2019 Share Posted August 2, 2019 Yeah, for me this bug just comes and goes. Yesterday when I first tried the TGP all worked well. Today it's broken again. And been like that for several months. Hardware: VPForce Rhino, FSSB R3 Ultra, Virpil T-50CM, Hotas Warthog, Winwing F15EX, Slaw Rudder, GVL224 Trio Throttle, Thrustmaster MFDs, Saitek Trim wheel, Trackir 5, Quest Pro Link to comment Share on other sites More sharing options...
Turbo Shartz Posted August 4, 2019 Share Posted August 4, 2019 Smoke rendering in IR from explosions/rocket motors/etc The smoke image while in FLIR on the new F-18 TPOD and either white or black hot is way over saturated, making the explosions just blobs of bright white (or black) rather than a realistic looking FLIR image. I understand that the FLIR rendering is being actively worked on, but why does this not occur to some people? I see over saturated blobs that look horrible while others see properly shaded explosions. I borrowed a couple of images a poster on reddit (u/goodman_od) shared. Is this being tracked and actively worked on? Link to comment Share on other sites More sharing options...
Harker Posted August 5, 2019 Share Posted August 5, 2019 It comes and goes for me as well. Worked well for a day, after the last OB patch and then it's all blobs again. The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
goodman.od.ua Posted August 5, 2019 Share Posted August 5, 2019 (edited) I've been messing around with settings for last few days and somehow fixed this issue for me. Still not sure what exactly did the fix (since i tried a lot of stuff), but I'll try to find out and share with you guys. Edited August 5, 2019 by goodman.od.ua Link to comment Share on other sites More sharing options...
Harker Posted August 5, 2019 Share Posted August 5, 2019 I've been messing around with settings for last few days and somehow fixed this issue for me. Still not sure what exactly did the fix (since i tried a lot of stuff), but I'll try to find out and share with you guys. Would very much appreciate it! The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
goodman.od.ua Posted August 5, 2019 Share Posted August 5, 2019 Would very much appreciate it! So i did try different settings today and noticed some pattern with game settings. I made my self a test mission where Abrams destroying Btr-80 right from the start, and i start in A-10C watching all these explosions with a tpod. Notice that today i started with good looking smoke, since i had it fixed few days ago. 1. Start this mission and see good kind of smoke and explosions → http://ipic.su/aCD7h.jpg 2. Quit mission, go to settings 3. Set "Chimney Smoke Density" to 2 (didn't try it with different values other than 0 and 2) 4. Exit DCS 5. Delete folders fxo and metashaders2 in %USERPROFILE%\Saved Games\DCS 6. Start DCS, load test mission 7. See bad kind of smoke and explosions → http://ipic.su/aCD72.jpg 8. Quit mission, go to settings 9. Set "Chimney Smoke Density" to 0 10. Exit DCS 11. Delete folders fxo and metashaders2 in %USERPROFILE%\Saved Games\DCS 12. Start DCS, load test mission 13. Enjoying good flir again :joystick: I reproduced all sequence 2 times just to be sure it works that way. My final settings → http://ipic.su/aCD6s.jpg My PC: i7 4790K, 16gb RAM DDR3, Gainward Phoenix GTX1080TI, SSD480GB + HDD4TB I hope this will help you guys! Link to comment Share on other sites More sharing options...
Zarma Posted August 5, 2019 Share Posted August 5, 2019 Can someone try with other value for chimney smoke density ? Mine is set to 5, would be sad to turn it totally off. i9 9900k, 64 Go RAM, RTX 4090, Warthog HOTAS Throttle & Stick, Saitek Combat Rudder, MFD Cougar, Trackir 5 Pro, Multipurpose UFC and Oculus Rift S (when I want some VR), http://www.twitch.tv/zarma4074 / https://www.youtube.com/user/Zarma4074 Link to comment Share on other sites More sharing options...
Harker Posted August 5, 2019 Share Posted August 5, 2019 So i did try different settings today and noticed some pattern with game settings. I made my self a test mission where Abrams destroying Btr-80 right from the start, and i start in A-10C watching all these explosions with a tpod. Notice that today i started with good looking smoke, since i had it fixed few days ago. 1. Start this mission and see good kind of smoke and explosions → http://ipic.su/aCD7h.jpg 2. Quit mission, go to settings 3. Set "Chimney Smoke Density" to 2 (didn't try it with different values other than 0 and 2) 4. Exit DCS 5. Delete folders fxo and metashaders2 in %USERPROFILE%\Saved Games\DCS 6. Start DCS, load test mission 7. See bad kind of smoke and explosions → http://ipic.su/aCD72.jpg 8. Quit mission, go to settings 9. Set "Chimney Smoke Density" to 0 10. Exit DCS 11. Delete folders fxo and metashaders2 in %USERPROFILE%\Saved Games\DCS 12. Start DCS, load test mission 13. Enjoying good flir again :joystick: I reproduced all sequence 2 times just to be sure it works that way. My final settings → http://ipic.su/aCD6s.jpg My PC: i7 4790K, 16gb RAM DDR3, Gainward Phoenix GTX1080TI, SSD480GB + HDD4TB I hope this will help you guys!You magnificent bas***d! It works! Thank you! The vCVW-17 is looking for Hornet and Tomcat pilots and RIOs. Join the vCVW-17 Discord. F/A-18C, F-15E, AV-8B, F-16C, JF-17, A-10C/CII, M-2000C, F-14, AH-64D, BS2, UH-1H, P-51D, Sptifire, FC3 - i9-13900K, 64GB @6400MHz RAM, 4090 Strix OC, Samsung 990 Pro Link to comment Share on other sites More sharing options...
Zarma Posted August 5, 2019 Share Posted August 5, 2019 Ok just erased FXO and METASHADER2 folders, smoke still on 5, working. i9 9900k, 64 Go RAM, RTX 4090, Warthog HOTAS Throttle & Stick, Saitek Combat Rudder, MFD Cougar, Trackir 5 Pro, Multipurpose UFC and Oculus Rift S (when I want some VR), http://www.twitch.tv/zarma4074 / https://www.youtube.com/user/Zarma4074 Link to comment Share on other sites More sharing options...
SkateZilla Posted August 6, 2019 Share Posted August 6, 2019 It's a Shaders Issue I believe. Windows 10 Pro, Ryzen 2700X @ 4.6Ghz, 32GB DDR4-3200 GSkill (F4-3200C16D-16GTZR x2), ASRock X470 Taichi Ultimate, XFX RX6800XT Merc 310 (RX-68XTALFD9) 3x ASUS VS248HP + Oculus HMD, Thrustmaster Warthog HOTAS + MFDs Link to comment Share on other sites More sharing options...
cabzi Posted August 6, 2019 Share Posted August 6, 2019 It's a Shaders Issue I believe. Why not change this to [REPORTED] or [iNVESTIGATING] so people know this is acknowledged by devs? i7-6850K | GTX1080 | 32GB DDR4 | Windows 10 Pro Link to comment Share on other sites More sharing options...
The RDN Posted August 22, 2019 Author Share Posted August 22, 2019 So i did try different settings today and noticed some pattern with game settings. I made my self a test mission where Abrams destroying Btr-80 right from the start, and i start in A-10C watching all these explosions with a tpod. Notice that today i started with good looking smoke, since i had it fixed few days ago. 1. Start this mission and see good kind of smoke and explosions → http://ipic.su/aCD7h.jpg 2. Quit mission, go to settings 3. Set "Chimney Smoke Density" to 2 (didn't try it with different values other than 0 and 2) 4. Exit DCS 5. Delete folders fxo and metashaders2 in %USERPROFILE%\Saved Games\DCS 6. Start DCS, load test mission 7. See bad kind of smoke and explosions → http://ipic.su/aCD72.jpg 8. Quit mission, go to settings 9. Set "Chimney Smoke Density" to 0 10. Exit DCS 11. Delete folders fxo and metashaders2 in %USERPROFILE%\Saved Games\DCS 12. Start DCS, load test mission 13. Enjoying good flir again :joystick: I reproduced all sequence 2 times just to be sure it works that way. My final settings → http://ipic.su/aCD6s.jpg My PC: i7 4790K, 16gb RAM DDR3, Gainward Phoenix GTX1080TI, SSD480GB + HDD4TB I hope this will help you guys! Hi, I've tried your solution and it smell good … I'll see after several flights but I've tried 4 times and the 4 times I have a pretty good image rendering :thumbup: Initially I have 2 on smoke density, and now I've try with 5 (a friend has this setting and has no bug) and it seems ok. Well done!! you're my new Hero of the Day :megalol::smartass::pilotfly: Link to comment Share on other sites More sharing options...
Freudi Posted August 25, 2019 Share Posted August 25, 2019 TGP Contrast Issue Hello, I have an issue with the Hornet TGP in FLIR mode. Every time there is an explosion/smoke in an area, my FLIR colours go crazy. Screenshots included. Any ideas why this happens and how I can stop it? Thanks, Félix :) Before smoke in TGP view: After smoke in TGP view: Link to comment Share on other sites More sharing options...
Harlikwin Posted August 25, 2019 Share Posted August 25, 2019 Try deleting fxo and metashaders New hotness: I7 9700k 4.8ghz, 32gb ddr4, 2080ti, :joystick: TM Warthog. TrackIR, HP Reverb (formermly CV1) Old-N-busted: i7 4720HQ ~3.5GHZ, +32GB DDR3 + Nvidia GTX980m (4GB VRAM) :joystick: TM Warthog. TrackIR, Rift CV1 (yes really). Link to comment Share on other sites More sharing options...
toutenglisse Posted August 25, 2019 Share Posted August 25, 2019 Hi Félix issue is under investigation : https://forums.eagle.ru/showthread.php?t=246649 For me it works OK since last DCS update + nvidia update (+ what Harlikwin said), but before that I had the issue. Link to comment Share on other sites More sharing options...
Freudi Posted August 25, 2019 Share Posted August 25, 2019 Thanks all - the solution posted here works :) Link to comment Share on other sites More sharing options...
Shadow KT Posted May 22, 2020 Share Posted May 22, 2020 This is still an issue today. 'Shadow' Everybody gotta be offended and take it personally now-a-days Link to comment Share on other sites More sharing options...
Recommended Posts