Orsi Posted October 23, 2020 Share Posted October 23, 2020 Exported displays are darker than in cockpit displays. Hope that ED fix this issue soon 1 Link to comment Share on other sites More sharing options...
LeCuvier Posted October 24, 2020 Share Posted October 24, 2020 I export the two MFCD's to a second monitor and they display with the same brightness as on the primary monitor, and with good contrast. You need to provide more specifics. Like, 1. which displays? 2. what kind of monitor do you export to? Is it of the same type & Spec as the primary screen? 3. Under which daylight conditions do you have the issue, day, night, twilight? 4. did you try to increase brightness settings for the second mnitor? LeCuvier Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5 Link to comment Share on other sites More sharing options...
Mr. Wilson Posted October 24, 2020 Share Posted October 24, 2020 Why does the brightness drop so dramatically when exporting displays to a second monitor? Earlier it was announced that the dependence of brightness on the environment was added, but why is it then not taken into account when exporting displays? Link to comment Share on other sites More sharing options...
Mr. Wilson Posted October 24, 2020 Share Posted October 24, 2020 Why does the brightness drop so dramatically when exporting displays to a second monitor? Earlier it was announced that the dependence of brightness on the environment was added, but why is it then not taken into account when exporting displays? Link to comment Share on other sites More sharing options...
Orsi Posted October 25, 2020 Author Share Posted October 25, 2020 1- I’m exporting the mcfds. 2 my main display is a Samsung 27 inch curve 1080p. My mcfds screen are 8 inch hdmi display 1024x768. 3- I’ve tested with all conditions 4 to be near my main screen I need to increase the brightness. color of the text is different too, green is darker at the exported screen. It’s even different to when positioning the exported one over the main screen Link to comment Share on other sites More sharing options...
Ziptie Posted October 25, 2020 Share Posted October 25, 2020 1- I’m exporting the mcfds. 2 my main display is a Samsung 27 inch curve 1080p. My mcfds screen are 8 inch hdmi display 1024x768. 3- I’ve tested with all conditions 4 to be near my main screen I need to increase the brightness. color of the text is different too, green is darker at the exported screen. It’s even different to when positioning the exported one over the main screen I'd love for the MFD's to look like that in VR. You can actually "see" the TAD when the map is enabled. As for the TGP display, that seems a bummer that it is that much darker.. I notice that your brightness rotary selector(s) in game on the dash are set to night - have you tried right clicking them to move them to the day position to see if it changes the brightness on your exported displays? Sorry, only thought I have - while I use TM Cougar MFD's - I use VR and don't have anything displayed to them via external screens.. Cheers, Ziptie i7 6700 @4ghz, 32GB HyperX Fury ddr4-2133 ram, GTX980, Oculus Rift CV1, 2x1TB SSD drives (one solely for DCS OpenBeta standalone) Thrustmaster Warthog HOTAS, Thrustmaster Cougar MFDs Airframes: A10C, A10CII, F/A-18C, F-14B, F-16C, UH=1H, FC3. Modules: Combined Arms, Supercarrier. Terrains: Persian Gulf, Nevada NTTR, Syria Link to comment Share on other sites More sharing options...
Orsi Posted October 26, 2020 Author Share Posted October 26, 2020 I'd love for the MFD's to look like that in VR. You can actually "see" the TAD when the map is enabled. As for the TGP display, that seems a bummer that it is that much darker.. I notice that your brightness rotary selector(s) in game on the dash are set to night - have you tried right clicking them to move them to the day position to see if it changes the brightness on your exported displays? Sorry, only thought I have - while I use TM Cougar MFD's - I use VR and don't have anything displayed to them via external screens.. Cheers, Ziptie The reason why was set to night, is that I was flying at the evening, so I just prepared the aircraft for night flight. I’ll try to recor a video with extracted displays over the mais display. Link to comment Share on other sites More sharing options...
LeCuvier Posted October 26, 2020 Share Posted October 26, 2020 My primary screen is a ACER XB270HU, and the secondary monitor is a ViewSonic VA2226w. I find the exported displays significantly more saturated. The TAD map on the main screen, for example, looks a bit washed out and I find the exported map far more useful. In my opinion, it would be helpful to have a method for adjusting Brightness, contrast and saturation of the exported displays. This should be done in the Viewport specification inside the monitor setup .lua files. Actually, I'm wondering whether that's already possible but we just lack the documentation... 1 LeCuvier Windows 10 Pro 64Bit | i7-4790 CPU |16 GB RAM|SSD System Disk|SSD Gaming Disk| MSI GTX-1080 Gaming 8 GB| Acer XB270HU | TM Warthog HOTAS | VKB Gladiator Pro | MongoosT-50 | MFG Crosswind Pedals | TrackIR 5 Link to comment Share on other sites More sharing options...
OpticalOpal Posted October 26, 2020 Share Posted October 26, 2020 I have the same problem. (Images attached to show issue with DED brightness.) Some sort of brightness offset in the monitor.lua could be an easy fix. LEFT_MFCD = { x = 1680; y = 618; width = 417; height = 417; Brightness = 100%; (then you can change to 150 or 80 depending of other variables.) } Link to comment Share on other sites More sharing options...
jonsky7 Posted October 26, 2020 Share Posted October 26, 2020 +1 Link to comment Share on other sites More sharing options...
Orsi Posted October 26, 2020 Author Share Posted October 26, 2020 just to show what`s going on. Notice the difference between cockpit MFCD and extracted MFCD bellow. Link to comment Share on other sites More sharing options...
Frank Dax Posted October 26, 2020 Share Posted October 26, 2020 Before update of August (OpenBeta) exporting DDIs and AMPCD brightness were ok , after update the brightness has dropped significantly and playing in these conditions is frustrating. I have been waiting patiently for this bug to be fixed but it hasn't been fixed so far. It probably concerns a small part of users but I hope Eagle Dynamics takes care it and It solves as soon as possible . 1 Link to comment Share on other sites More sharing options...
Ziptie Posted October 27, 2020 Share Posted October 27, 2020 ^^ Wow ^^ Yeah that is one heck of a difference. I'm quite out of my element when it comes to exported screens, again the life of a VR user - but I can safely say, I'd kill for the MFD's to look like your extracted ones, in the game. I find the MFDs are far too bright most of the time and require adjusting of the brightness/contrast nearly every time - and then further adjustments as the time progresses throughout the mission. Hopefully a mod or experienced person can give you some valuable input with the issue - as there is a stark difference from the two for sure. Cheers, Ziptie i7 6700 @4ghz, 32GB HyperX Fury ddr4-2133 ram, GTX980, Oculus Rift CV1, 2x1TB SSD drives (one solely for DCS OpenBeta standalone) Thrustmaster Warthog HOTAS, Thrustmaster Cougar MFDs Airframes: A10C, A10CII, F/A-18C, F-14B, F-16C, UH=1H, FC3. Modules: Combined Arms, Supercarrier. Terrains: Persian Gulf, Nevada NTTR, Syria Link to comment Share on other sites More sharing options...
Orsi Posted October 27, 2020 Author Share Posted October 27, 2020 I think the displays in cockpit are to bright too. But the major issue is that they don't match with the extracted. Link to comment Share on other sites More sharing options...
BuzzU Posted October 28, 2020 Share Posted October 28, 2020 I agree the default setting is too bright. Wags even shows how he darkens his. Buzz Link to comment Share on other sites More sharing options...
Orsi Posted October 28, 2020 Author Share Posted October 28, 2020 I agree the default setting is too bright. Wags even shows how he darkens his. do you have a link for that? Link to comment Share on other sites More sharing options...
BuzzU Posted October 28, 2020 Share Posted October 28, 2020 do you have a link for that? It's in one of his new videos showing the new weapons for the new Hog. I forgot which one. It's just him showing how he likes the MFD to look by adjusting the gain/brightness. Nothing you can't do but it does show he thinks the default setting is too bright. Buzz Link to comment Share on other sites More sharing options...
Foka Posted October 28, 2020 Share Posted October 28, 2020 It's by the rocker switches on corners of the MFCDs, you have there rockers for brightness and contrast. But it isn't the problem, problem is that MFCDs on main screen and on exported screen have different brightness level. Yopu won't fix that that way. Link to comment Share on other sites More sharing options...
BuzzU Posted October 28, 2020 Share Posted October 28, 2020 It would be nice if you could adjust the brightness on the exported MFD's. 1 Buzz Link to comment Share on other sites More sharing options...
Orsi Posted October 28, 2020 Author Share Posted October 28, 2020 It would be nice if you could adjust the brightness on the exported MFD's. a way to adjust exported MFD will be verry nice!! 1 Link to comment Share on other sites More sharing options...
dorianR666 Posted October 29, 2020 Share Posted October 29, 2020 It would be nice if you could adjust the brightness on the exported MFD's. good idea. could probably be very easy to implement as bindable to keyboard combination like anything else. CPU: AMD Ryzen 5 1600X GPU: AMD RX 580 Link to comment Share on other sites More sharing options...
Orsi Posted October 31, 2020 Author Share Posted October 31, 2020 I can’t see the reason for exported displays have this kind of color and brightness differences. Hope that someone from ED could have a solution, some times is very difficult to adjust like in cockpit. Link to comment Share on other sites More sharing options...
Silvester.E Posted October 31, 2020 Share Posted October 31, 2020 I kinda have similair problem with cubesim displays. During night operations, the external displays are al the way down on lowest brightness setting. To actually see something on the exported screens, i have to bump up in-game brightness of the mfd’s to it’s max brightness. Not sure if it is a dcs related problem. Link to comment Share on other sites More sharing options...
Silvester.E Posted November 1, 2020 Share Posted November 1, 2020 Having same issue but within the Viper. Exported mfd’s are washed out. In dark night i have to bump in-game brightness all the way up to have normal view on the exported displays.. 1 Link to comment Share on other sites More sharing options...
ED Team BIGNEWY Posted November 2, 2020 ED Team Share Posted November 2, 2020 Hi all, I have merged all the threads here so we can take a closer look at this, it does not seem to be related to one module specifically but to the export process itself. I will ask the team for feedback. thank you 1 Forum rules - DCS Crashing? Try this first - Cleanup and Repair - Discord BIGNEWY#8703 - Youtube - Patch Status Windows 11, NVIDIA MSI RTX 3090, Intel® i9-10900K 3.70GHz, 5.30GHz Turbo, Corsair Hydro Series H150i Pro, 64GB DDR @3200, ASUS ROG Strix Z490-F Gaming, HP Reverb G2 Link to comment Share on other sites More sharing options...
Recommended Posts