Jump to content

New Capt Zeen F-16C v0.5 Helios profile !!!


Recommended Posts

Hello all !

 

 

I've been very busy lately so i dont have a lot of free time to work on Helios profiles, but everytime i can find a spare time, i put all the effors on this new proyect.

 

Is only the main pilot panel, i am still working on the lateral panels, but meanwhile, you can use this and test it!

 

I promisse to finish it as soon as posible!

 

So... here you got! a brand new F-16C V0.5 Helios profile!

 

 

Zl6tuUg.jpg

 

 

THE NEW CAPT ZEEN F-16C V0.5 PROFILE:

 

 

For this profile i exported all the instruments, lamps, selectors, switches and levers in the F-16C main panel cockpit and alarms lamps.

Of course i added the navigation panel from others profiles, so you can check airport charts, tactical maps, ndbs, etc

 

 

- HELIOS VERSION NEEDED:

 

This new profile uses the Generic interface, so you need to have the Helios version 1.4.2019.1005 or above

You can donwload from here: https://www.digitalcombatsimulator.com/en/files/3302014/

And yes, for the first time in Helios, you can use the mouse weel to rotate rotarys and pots, thanks to BeamRider!

 

- PROFILE FILES:

 

F16C_V0.5.hpf .....................16:10 monitor resolutions

F16C_V0.5b.hpf .....................16:9 monitor resolutions

 

 

- EXPORT FILES:

 

In this version i included a new file organization for the export. Thanks a lot to Crivi, who reorganized all the files and fucntions by planes.

Now, new airplanes can have their own files and do not ineterfere with the helios main export functions.

You need to install those files in your scripts folder.

 

- MONITOR ASPECT RESOLUTIONS:

 

I made two different profiles, v0.5 for 16:10 monitors and v0.5b for 16:9 monitors. Use the one better fit width you monitor resolution.

 

- Thanks:

 

I made the entire graphic art, based on screenshots of the simulator and the textures folder of the game.

I used the airport charts from http://www.virtual-jabog32.de

I used the Persian Gulf Kneeboard pages by Pellelil - https://www.digitalcombatsimulator.com/en/files/3303320/

I used the Nevada/Arizona Airports diagrams V2.3 - http://www.476vfightergroup.com

I used the DCS Normandy Aerodrome Charts V1.0 by Capt Zeen - http://www.captzeen.com

For the export.lua i used the Loophole version, compatible width KA50, A10c and FC3 as a base for all my implementations.

In the export.lua i include a couple of functions by [FSF]Ian to export the digits of the UV26 for the MI-8

Thanks to Crivi, who reorganized all the export files by airplanes and functions.

I want to give thanks to Bluefinbima, for let me include the new helios controls and features, and the new A10C interface.

Thanks to Rashmaninov, for implementing the new helios Trans-rotate control. ¡Gracias amigo!

Thanks to Cylution, yzfanimal, Damien022, Derammo, Piet Van Nes and BeamRider for the good work done implementing new Helios features.

And of course to Gadroc for creating Helios, this great software.

 

 

PROFILE FEATURES

 

 

Main Front Panel:

- All the instruments, switches and lamps

- Empty spaces to visualize the viewport exports for the cockpit

 

Alarms Panel:

- Panel with the alarms indicators

 

Navigation panel:

Aerodromes and visual operation chart v 4.0.3 - http://www.virtual-jabog32.de

Persian Gulf Kneeboard pages by Pellelil - https://www.digitalcombatsimulator.com/en/files/3303320/

Nevada/Arizona Airports diagrams V2.3 - http://www.476vfightergroup.com

DCS Normandy Aerodrome Charts V1.0 by Capt Zeen - http://www.captzeen.com

Custom panel - for user custom images, replace the ones in : Documents\Helios\Images\Capt_Zeen\Kneeboards\custom using the same name of the images

 

- About panel:

- Info about the profile and version.

 

 

 

INSTALLATION

 

-Install Helios if you don't have it yet. https://www.digitalcombatsimulator.com/en/files/3302014/

-Copy the profile on the profiles folder, usualy in user/my documents/helios/profiles

-Copy the folder Capt_Zeen on the images folder, usualy in user/my documents/helios/images

-Run the HeliosProfileEditor, load the profile F16C_V0.5 or F16C_V0.5b, and perform a Reset Monitors from the menu Profile.

-Save the profile using your custom name

 

As example, here you got a video tutorial where you can see how i do this process on the F18 profile:

 

 

 

RUNNING THE PROFILE

 

 

-Open the Helios Control Center, select the profile and start it.

 

 

 

CONFIGURING THE SECOND MONITOR

 

Included in the package, there is a folder called "DCS Monitor Configuration" width a complete folders structure you can drop on DCS World instalation folder. This structure prepare the diferents lua scripts to export the views to the second monitor to represent the Pilot cockpit.

 

Unless you got my same configuration (two 1920x1080 monitors), you will need to change the coordinates x and y of every viewport and the width and height sizes of them in the DCS Monitor Configuration\Config\MonitorSetup files.

Change it before copy to the game folder, and save a copy of this structure, cause DCS world rewrite this files every update!

 

To calculate the correct position of each viewport, run Helios and start the profile. Take a screenshot and paste the image in any art program. Paint from Windows works well.

Put the cursor over the left-up corners of every empty spaces and write down the coordinates. Drag a box from that point to the right_down corner, and take the width and height of the rectangle.

Modify the 2_monitors-F16C.lua width your correct numbers. and you can now copy the complete "DCS Monitor Configuration" folder to the DCS game folder, or use a Mods control program like OVGME to do it.

 

As example, here you got a video tutorial where you can see how i do this process on the F18 profile:

 

 

 

As always you can download from my site:

www.captzeen.com

 

 

CONTACT

 

discord channel for support:

https://discord.gg/sS66aJf


Edited by Capt Zeen
Link to comment
Share on other sites

...another work of art - we are all so lucky to have you - thank you for another stunning profile

i7-5820K 3.30Ghz | Asus X99-S | Sapphire R290X | R7 240 | 16GB DDR4 PC4 2800MHz | Samsung 850 EVO 500GB SSD (OS) | Samsung 840 EVO 500GB SSD (DCS) | Noctua NH-D14 2011 Cooler | OCZ ZT 750W '80 Plus Bronze' Modular PSU | NZXT Phantom Enthusiast | 3 x IIyama Prolite E2473HDS 24" | 1 x Dell S2240T 21.5" Touch Screen | Windows 10 64-Bit | AMD Eyefinity 5760 x 1080 | TrackIR5 | TM Warthog HOTAS | MFG Crosswind 1771 | Vaicom Pro + VA (Licensed) | Sennheiser Game Zero | Honeycomb Yoke (June 2020)]

Link to comment
Share on other sites

Awesome thanks

 

Question, how do I get the dcs generic interface? When trying to load it, says can not find it? I have Helios ver 1.4.2019.1005 but dont have KA50 interface.. I do have DCS black shark but it wont use it.


Edited by yeldraw1
Link to comment
Share on other sites

Outstanding work there buddy! really appreciate your efforts!

MSI MAG Z790 Carbon, i9-13900k, NH-D15 cooler, 64 GB CL40 6000mhz RAM, MSI RTX4090, Yamaha 5.1 A/V Receiver, 4x 2TB Samsung 980 Pro NVMe, 1x 2TB Samsung 870 EVO SSD, Win 11 Pro, TM Warthog, Virpil WarBRD, MFG Crosswinds, 43" Samsung 4K TV, 21.5 Acer VT touchscreen, TrackIR, Varjo Aero, Wheel Stand Pro Super Warthog, Phanteks Enthoo Pro2 Full Tower Case, Seasonic GX-1200 ATX3 PSU, PointCTRL, Buttkicker 2, K-51 Helicopter Collective Control

Link to comment
Share on other sites

  • 2 months later...
  • 2 months later...
  • 2 weeks later...

Profile works great for me except the DED and the RWR don't show up for me on my 2nd monitor. The EHSI and the left & right mfcd work fine. Any ideas? I know I have the coordinates correct. They just don't show up on either monitor no matter where I set the values.

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...