tallen1250 Posted October 13, 2020 Share Posted October 13, 2020 Newbie here. We are trying to build our first panel for the A10c. Prior to this we had played with a micro switch to arm and disarm the ejection seat with no issues. Now that is not working and we cannot get any of the switch for the electrical panel we are building to work. Seems to jave stopped working when the new version of helios came out but not certain of this. I have read the DCS Bios manual and I am using the code snipets from the console. Everything shows green and connected. Not sire what is wrong or where to look now. Any help would be greatly appreciated. Link to comment Share on other sites More sharing options...
David OC Posted October 14, 2020 Share Posted October 14, 2020 Hi Tallen1250, Better off posting this down in the Input output section. Then under the (home cockpits) etc. Post as much info as you can about the problem. i7-7700K OC @ 5Ghz | ASUS IX Hero MB | ASUS GTX 1080 Ti STRIX | 32GB Corsair 3000Mhz | Corsair H100i V2 Radiator | Samsung 960 EVO M.2 NVMe 500G SSD | Samsung 850 EVO 500G SSD | Corsair HX850i Platinum 850W | Oculus Rift | ASUS PG278Q 27-inch, 2560 x 1440, G-SYNC, 144Hz, 1ms | VKB Gunfighter Pro Chuck's DCS Tutorial Library Download PDF Tutorial guides to help get up to speed with aircraft quickly and also great for taking a good look at the aircraft available for DCS before purchasing. Link Link to comment Share on other sites More sharing options...
Recommended Posts