SU-25 WHAT THE !!!!!!!!!???

So I finally learned most of the A10, but something about the SU-25 intrigues me

I have the X-52 Joystick, rudder pedals, track IR and all that.

I have a profile for my Joystick that works great with the A10, but I wanna learn the darn su-25

Nothing seems to work right with the A10 profile,

Do I have to redo everything ?? How do I get this set up?

THANKS GUYS!

Nothing seems to work right with the A10 profile,

 

Do I have to redo everything ?? How do I get this set up?

 

THANKS GUYS!

You are aware that each aircraft has its own control settings for each controller?

Your A-10 profiles are not in use when you fly another aircraft. Your TIR profile stays the same, of course, but the others must be set up.

I have a profile for my Joystick that works great with the A10, but I wanna learn the darn su-25

 

Nothing seems to work right with the A10 profile,

 

Do I have to redo everything ?? How do I get this set up?

J

THANKS GUYS!

Yep... I'm affraid you will have to create another profile for the SU-25T, even if you are using Saitek's Profiler, they are different birds and they use different key mapping... but hey don't be worried... the SU-25T isn't modeled at the level of A-10C, so you just need to map a couple of keys to get it going and drop some ordinance

arrrggg, ok thanks guys..

Anyone know if there is an su-25 profile made for the x-52 yet?

arrrggg, ok thanks guys..

 

Anyone know if there is an su-25 profile made for the x-52 yet?

I don't know if this will work but it's worth a try: X-52 Profile for FC2.

Rich

arrrggg, ok thanks guys..

 

Anyone know if there is an su-25 profile made for the x-52 yet?

Don,t know if there are any available... try using search. Btw if you are going to create a profile just be aware that the canon is fired with the "Release selected weapon" or "Fire selected weapon" key, wich is the space bar as far as i can remember... there is a key labeled as "Canon" that is used to selected the canon a current weapon when the hub is in "Ground Mode"

Anyway I,m also learning to handle the Toad so let me know if you need further assistance

I don't know if this will work but it's worth a try: X-52 Profile for FC2.

 

 

Rich

Fast fingers lol

Don,t know if there are any available... try using search. Btw if you are going to create a profile just be aware that the canon is fired with the "Release selected weapon" or "Fire selected weapon" key, wich is the space bar as far as i can remember... there is a key labeled as "Canon" that is used to selected the canon a current weapon when the hub is in "Ground Mode"

 

Anyway I,m also learning to handle the Toad so let me know if you need further assistance

Alright thanks!!

I guess I will make my own profile.

Does anyone have those nice .pdf files that show what keys are needed for the su-25?

Anyone have a guide on whats a must have and whats not needed, key commands that is

Its a bitch because there is no zoom feature or clickable stuff in the su-25

Its a bitch because there is no zoom feature or clickable stuff in the su-25

No zoom ?

You can assign the cockpit zoom to an axis, and the Shkval has 2 levels of zoom, bound to keystrokes.

(assuming you actually mean the Su-25T by Su-25 ?)

Needed for Start Up;

RSHIFT+L = Start APU (put electrical power on, whatever)

L = cockpit instrument lights (for when its dark obviously)

Ctrl + C = close/open canopy

Right Alt + Home = Start ENG #1

Right Ctrl + Home = Start ENG #2

Right Alt + L = taxi/landing lights (take's a while to move down from stowed position under the wingtip speed brakes

W = Wheel Brake

Right Ctrl + L = Navigation lights (steady, alternating Left/Right, off)

Needed for Take-off;

1 = select navigation mode

F = Flaps (cycles between fully retracted and down one "notch" is for take-off)

G = Landing Gear (retract/extent)

Ctrl + ` = cycle waypoints, or cycle airfields when in Return/ILS mode nav mode

Needed for Flying

Assign your axis!!!

` = AP override (is the key left of the 1 on your keyboard)

Alt + 1 = AP Attitude Hold (maintains bank and pitch angle)

Alt + 2 = AP Altitude and Roll Hold (maintains altitude and bank angle)

Alt + 3 = AP Transit Level Flight (panic button, returns aircraft to straight and level flight)

Alt + 4 = AP Barometric Altitude Hold (can still roll the aircraft)

Alt + 5 = AP Radio Altitude hold (can still roll the aircraft, follows terrain, Alt THERE ARE SLOPE LIMITS believe max 5 degrees up)

Alt + 9 = AP Disengage (disengage whatever autopilot mode was selected)

A = Auto Pilot on in selected NAV mode (meaning fly's to next waypoint, fly's to return point, fly's ILS approach, or when in Air to Ground mode and any targeting device lock it will fly to the locked target at the present altitude)

Rctrl + . = Trim UP

Rctrl + / = Trim Right Roll (right wingtip down)

Rctrl + ; = Trimp Down

Rctrl + , = Trim Left Roll (left wingtip down)

Needed for Air to Ground

7 = select Air to ground mode

Shift + E = activate rear hemisphere IR jammer (should help against heat seaking missiles, don't expect magic though)

Space = Launch/fire selected weapon (gun/rockets/bombs/missiles)

Ctrl + V = Salvo Mode (launches selected weapon in salvo, for example 4 rocket pods at same time)

D = Cycle weapon stations

Right Ctrl + O = Mercury LLTV (low light version of Skhval, only if fitted)

C = Select Canon

i = Select Fantasmagoria (needed to lock and launch KH-25MPU and KH-58 Anti Radiation Missiles)

Insert = deploy chaff (only good against radar guided missiles)

Delete = deploy flares (only good against Heat Seaking missiles)

for both, DONT EXPECT MAGIC!

O = Uncage/Cage skhval

; = Skhval UP

/ = Skhval Right

. = Skhval Down

, = Skhval Left

(these also work for the ELINT and LLTV target designators)

Ctrl + W = Jettison Weapons (start whit A-G weapons, outter pylons first working inwards, then continues whit A-A weapons outter pylons first working inwards, pods/jammers can NOT BE JETTISONED)

Enter = Lock Target

Alt + R = Jettison External tanks (also in pairs, outboard stations first then inboard)

V = cycle ripple interval

Ctrl + Space = Ripple quantity

That's just about it i guess, you can download my profile here;

http://forums.eagle.ru/attachment.php?attachmentid=37779&d=1270665727

(both for SU33 and SU25T profile is bit dated so some things may not work anymore)

~S~

***EDIT***

Forgot the following

In options, controls, axis assignments look for I 251 zoom this is zoom of the Skhval and can be bound to a rotary/slider or other axis

Also look for "target box size, gun funnel size, gunpod elevation" this can also be bound to an axis.

E = ECM

There's a better ECM pod you can fit, the MPS-410, usually with the Phantasmagoria if you want to go SAM hunting. It does take time to warm up however, so you need plan ahead.