TheCrusader Posted October 7, 2010 Share Posted October 7, 2010 (edited) Hi all, I have issues of very low quality textures in the cockpit, irrespective of what graphics settings I use. This goes so far as making reading the switch lables impossible. Here is a screenshot: http://www.pictureupload.de/originals/pictures/071010232124_ScreenShot_004.jpg System specs are: Intel i7 920 @stock, 6GB triple channel ram, ATI 5970, Windows 7 64Bit Newest ATI driver, newest DirextX update, running 32 / 64 bit applicaton (tested both) with administrator rights. Whats weird is that when I first started the Sim the textures where fine, then the application crashed from alt-tabbing in fullscreen mode, problem seems to persist ever since. I also deleted the TEMP folder in between and checked the config files and reg entries, but no hint whatsoever so far. Cheers, Crusader Edited October 8, 2010 by TheCrusader Link to comment Share on other sites More sharing options...
Pilotasso Posted October 7, 2010 Share Posted October 7, 2010 Noticed the zip files got corrupted on mine to the point even the buildings didnt show, I had to reinstall everything. Worth of note my PC almost died last night with symptoms that resembled an overheating GFX causing the system to freeze while playing. Dont think it had to do with DCS (also happened spontaneously and randomly on desktop) however upon diagnosing the problem I found out some of DCS files were indeed corrupt though the SIm played without complaints, just didnt display the after-mentioned items. [sigpic]http://forums.eagle.ru/signaturepics/sigpic4448_29.gif[/sigpic] My PC specs below:Case: Corsair 400C PSU: SEASONIC SS-760XP2 760W Platinum CPU: AMD RYZEN 3900X (12C/24T) RAM: 32 GB 4266Mhz (two 2x8 kits) of trident Z RGB @3600Mhz CL 14 CR=1T MOBO: ASUS CROSSHAIR HERO VI AM4 GFX: GTX 1080Ti MSI Gaming X Cooler: NXZT Kraken X62 280mm AIO Storage: Samsung 960 EVO 1TB M.2+6GB WD 6Gb red HOTAS: Thrustmaster Warthog + CH pro pedals Monitor: Gigabyte AORUS AD27QD Freesync HDR400 1440P Link to comment Share on other sites More sharing options...
nihalmurth Posted October 8, 2010 Share Posted October 8, 2010 Was attempting to do the CCIP/CCRP bombing training mission and had the HUD disappear on me after the portion where you are supposed to dive to see the CCIP pipper. After diving and pulling out I could no longer see the HUD. I checked the switches on the left side of the cockpit dash, but couldn't find anything obviously wrong/off. The other electrical equipment was working fine. I am running with all the settings at low. Computer Specs: Windows XP SP3 Intel C2D E6550 2.33GHZ 2.5GB RAM ATI RADEON 4800 Link to comment Share on other sites More sharing options...
Blaze Posted October 8, 2010 Share Posted October 8, 2010 Nellis @ Night - Remove Bright Orange Textures If you like me have flown Nevada at night, you probably have seen the bright orange squares around the cities. It's a texture that shows up when a texture is missing from the game. To get rid of it, go into your "Bazar\TestTextures" folder and delete the texture "missing_texture.bmp" and your bright orange blobs on the ground will be gone. :thumbup: BEFORE AFTER Happy Flying! :) i7 7700K | 32GB RAM | GTX 1080Ti | Rift CV1 | TM Warthog | Win 10 "There will always be people with a false sense of entitlement. You can want it, you can ask for it, but you don't automatically deserve it. " Link to comment Share on other sites More sharing options...
vrv Posted October 8, 2010 Share Posted October 8, 2010 Thanks. When I first took off during a night flight I was surprised to see giant slabs of cheese below me. Are NVG"s in the beta? I haven't tried them out yet. [sIGPIC][/sIGPIC] EtherealN: I will promptly perform a sex change and offer my hand in marriage to whomever Link to comment Share on other sites More sharing options...
Blaze Posted October 8, 2010 Share Posted October 8, 2010 Yep the NVG's work. Hit "RShift+H". ;) i7 7700K | 32GB RAM | GTX 1080Ti | Rift CV1 | TM Warthog | Win 10 "There will always be people with a false sense of entitlement. You can want it, you can ask for it, but you don't automatically deserve it. " Link to comment Share on other sites More sharing options...
Icarus2 Posted October 8, 2010 Share Posted October 8, 2010 Here is my rear view. I seem to have aquired a third stablizer. Link to comment Share on other sites More sharing options...
71st_Mastiff Posted October 8, 2010 Share Posted October 8, 2010 Here is my rear view. I seem to have aquired a third stablizer. thats your canopy line they have those painted on . " any failure you meet, is never a defeat; merely a set up for a greater come back, " W Forbes "Success is not final, failure is not fatal, it is the courage to continue that counts," Winston Churchill " He who never changes his mind, never changes anything," MSI z690MPG DDR4 || i914900k|| ddr4-64gb PC3200 || MSI RTX 4070Ti|Game1300w|Win10x64| |turtle beach elite pro 5.1|| ViRpiL,T50cm2|| MFG Crosswinds|| VT50CM-plus rotor Throttle || G10 RGB EVGA Keyboard/MouseLogitech || PiMax Crystal VR || 32 Samsung|| Link to comment Share on other sites More sharing options...
sungsam Posted October 8, 2010 Share Posted October 8, 2010 (edited) Come on now, is there really any need for that :D Oh god :doh: Edited October 8, 2010 by sungsam DCS F16C 52+ w JHMCS ! DCS AH64D Longbow ! Link to comment Share on other sites More sharing options...
hassata Posted October 8, 2010 Share Posted October 8, 2010 thats your canopy line they have those painted on . Matt said the is an actually correct. I asked if it was related to electronics or something but never got a response Woops, should read carefully before i post lol. Thanks for clearing that up. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
CrashEd Posted October 8, 2010 Share Posted October 8, 2010 (edited) Flickering textures at the nevada terrain... Only in the citys.. dont know if its a bug... Here are some pictures: http://img827.imageshack.us/gal.php?g=screenshot000gp.jpg Kind Regards Same here, I'm getting flickering textures in both theatres. Mainly triangular shapes on the tops of buildings and around static objects. I'm also experiencing the colour change phenomenon as posted by Pilotasso. It can be seen whilst panning around "Nellis Static Template.miz". I'm also seeing static, vertical lines if I look over my right shoulder in "Shooting Gallery.miz". Will try and post a screen shot... Settings: 1- Windows 7 64-bit 2- i7 920 @2.67GHz 3- 6GB 4- Nvidia GTX460. Driver: v258.96 5- Single monitor @ 1680x1024 Textures = High Scenes = High Civ Traffic = Low Water = Medium Visible Range = Medium MSAA = x4 TSSAA = On Heat blur = Off HDR = On Clutter = 120m Mirrors = Off I've tried setting everything to low and all other options to off, but I still get flickering and the other gfx anomalies. If I run the 64-bit exe, the effects are less noticeable, but are still there. EDIT: Here are some screenies to show the flickering and verticle line anomilies: Edited October 8, 2010 by CrashEd Link to comment Share on other sites More sharing options...
Icarus2 Posted October 8, 2010 Share Posted October 8, 2010 (edited) thats your canopy line they have those painted on . Interesting. Not sure why a real pilot would want a canopy line, but ok. It is on the real one and I never noticed that before. The real one is even longer and goes almost over the pilots head. Edited October 8, 2010 by Icarus2 Link to comment Share on other sites More sharing options...
hollywoody Posted October 8, 2010 Share Posted October 8, 2010 Hi, Not sure if this has been addressed but when Im in the cockpit and on the ground or in the air..when I slew my head left or right it seems that all the graphics/view have a slight fine JITTER through out the slew? though It's smooth within BS. this is while using TIR. any quick fixes? btw, my settings are at MED, with high textures, 512 cockpit,msaa@8, 1900x1200. thanks [sIGPIC][/sIGPIC] http://WWW.VFA-113.COM ________________________ Win 8.1 i5-3570 3.4ghz-Trackir5-TM Warthog - Pro-Saitek Combat Rudders-Viso 43" 4k" Link to comment Share on other sites More sharing options...
Nate--IRL-- Posted October 8, 2010 Share Posted October 8, 2010 Hi, Not sure if this has been addressed but when Im in the cockpit and on the ground or in the air..when I slew my head left or right it seems that all the graphics/view have a slight fine JITTER through out the slew? though It's smooth within BS. this is while using TIR. any quick fixes? btw, my settings are at MED, with high textures, 512 cockpit,msaa@8, 1900x1200. thanks Tearing? Google D3doverrider to force V-Sync in sim. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading Link to comment Share on other sites More sharing options...
hollywoody Posted October 8, 2010 Share Posted October 8, 2010 Tearing? Google D3doverrider to force V-Sync in sim. Nate it's not tearing I beleive but more of fine stuttering/jittering. would this be treated as the same as tearing? Thanks Nate [sIGPIC][/sIGPIC] http://WWW.VFA-113.COM ________________________ Win 8.1 i5-3570 3.4ghz-Trackir5-TM Warthog - Pro-Saitek Combat Rudders-Viso 43" 4k" Link to comment Share on other sites More sharing options...
Nate--IRL-- Posted October 8, 2010 Share Posted October 8, 2010 it's not tearing I beleive but more of fine stuttering/jittering. would this be treated as the same as tearing? Thanks Nate No, I was just guessing as to what you meant to be honest. Personally I find checking for jitters easier from an external view looking straight down on a moving aircraft. Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading Link to comment Share on other sites More sharing options...
hassata Posted October 8, 2010 Share Posted October 8, 2010 Anyone else finding the V-Sync is on notwithstanding selection in CCC (I'm on ATI) or non-use of D3D Overrider. It's crazy, and almost the exact opposite of the FC2 and BS problem, but I cant push past the monitor refresh rate. I don't mind as that's what I want anyway, but I just want to make sure triple buffer through D3D or even CCC is working. [sIGPIC][/sIGPIC] Link to comment Share on other sites More sharing options...
hollywoody Posted October 8, 2010 Share Posted October 8, 2010 No, I was just guessing as to what you meant to be honest. Personally I find checking for jitters easier from an external view looking straight down on a moving aircraft. Nate it's not a stutter like if your cpu is trying to catch up with the graphics but more on the lines of a not so smooth pan. when I pan using TIR it looks more like a vibration/jitter though out the pan. thanks [sIGPIC][/sIGPIC] http://WWW.VFA-113.COM ________________________ Win 8.1 i5-3570 3.4ghz-Trackir5-TM Warthog - Pro-Saitek Combat Rudders-Viso 43" 4k" Link to comment Share on other sites More sharing options...
Nate--IRL-- Posted October 8, 2010 Share Posted October 8, 2010 And If you pan with the keys, what's it like? Is it only Tir that's jittery? Nate Ka-50 AutoPilot/stabilisation system description and operation by IvanK- Essential Reading Link to comment Share on other sites More sharing options...
hollywoody Posted October 8, 2010 Share Posted October 8, 2010 And If you pan with the keys, what's it like? Is it only Tir that's jittery? Nate I'll try this tonight after work PST. I keep you updated thanks [sIGPIC][/sIGPIC] http://WWW.VFA-113.COM ________________________ Win 8.1 i5-3570 3.4ghz-Trackir5-TM Warthog - Pro-Saitek Combat Rudders-Viso 43" 4k" Link to comment Share on other sites More sharing options...
Nickentik Posted October 8, 2010 Share Posted October 8, 2010 Is it due to it being a beta that parts of the cockpit are very low textured ? I have a good vid card (HD5830) and all the settings are at high. Parts of the cockpit (front dash and control display unit amongst others) are very detailed. The radio's on the left console however are very badly textured no matter my display settings. The caution lights on the right panel are so bad i can't even read the cautions they display. Link to comment Share on other sites More sharing options...
CrashEd Posted October 8, 2010 Share Posted October 8, 2010 Hi, Not sure if this has been addressed but when Im in the cockpit and on the ground or in the air..when I slew my head left or right it seems that all the graphics/view have a slight fine JITTER through out the slew? though It's smooth within BS. this is while using TIR. any quick fixes? btw, my settings are at MED, with high textures, 512 cockpit,msaa@8, 1900x1200. thanks Getting the same here too. It seems to happen over land mass (the firing range for example). It's like a series of micro stutters, but they are almost unnoticeable. It's hard to explain! Just tried panning around using the keys and the effect seems to be there, but to a lesser extent. You can see my specs in this post: here Maybe it is just that the current beta isn't optimised and it will come out in the wash... I wish NaturalPoint would get their finger out and sort out the 64-bit version of s/w.... Link to comment Share on other sites More sharing options...
TheCrusader Posted October 8, 2010 Share Posted October 8, 2010 @Nickentik: Yeah I get the same too, still searching for the cause though. (and reported a few pages back) Interesting we both have ATI cards of the 5xxxx generation! Cheers Crusader Link to comment Share on other sites More sharing options...
Cp Posted October 8, 2010 Share Posted October 8, 2010 I'm getting black flickering circles that sometimes cover my entire screen when looking in certain directions, mostly when looking into the sun, esp at sunset/rise due to the extra sun glare at that time. the black circles appear only when I'm moving my view and disappears when I hold it steady and only when I have HDR on. I have updated both my DirectX and my video card drivers. (the circle in this picture seems to be originating from the full moon that was behind me) I'm running the 32bit version on vista 64 and I have got an ati hd 4870 1 gb. Link to comment Share on other sites More sharing options...
Tulkas Posted October 8, 2010 Author Share Posted October 8, 2010 Whenever I try to set TEXTURES HIGH the mission won´t load. I get a glimpse of the cockpit, it disappear right away, a glmpse of water, disappears aswell and then the screen is black. But the sim is still working, I can hit ESC an appears a square (exit menu) with white rectangles where the text is suposse to be but there are no fonts to be seen. I click on the rectangle placed where the exit option is and I can get to the main menu and everything works ok. So far playing around with the other graphic options I had no problem. Asus P5Q PRO Intel Core2 Duo E8400 3.00GHz 4Gb RAM Asus ATI 4850 WindowsXP Pro 32b Cheers Tulkas Extending the information in my first post after more testing: -Happends always with TEXTURES set to HIGH in Caucaso theater -Happends always when I load a mission in Nellis NO MATTER the graphics settings, even the lowest. It looks like this after a glimpse of the cockpit: Thos rectangles are suppouse to be the exit menu and the info bar in the ext. view. Regards Tulkas Link to comment Share on other sites More sharing options...
Recommended Posts