jib Posted February 24, 2012 Share Posted February 24, 2012 jib, I did another version to see if the axes swapping is now correct and the spring stops while holding down the trim button. If any of the axes is still inverted try to see which one, X or Y. Remember that you have to use an actual joystick button. I mean, if you are using logitech's programming tool to send a 'T' with the trim button, my program won't catch any button press. That same joystick button must be configured inside black shark as trim button. Also, remember that you have to launch the program AFTER the mission is completely loaded. Or, if the program is already running, you have to select "Init DirectInput" in the Options menu to steal control of force feedback from black shark 2. But only after the mission is loaded. Thanks for this, I havn't had a chance to test it (I saw the post when I was at work then forgot about it:doh:) Hopefully I can test it out this weekend Mods I use: KA-50 JTAC - Better Fire and Smoke - Unchain Rudder from trim KA50 - Sim FFB for G940 - Beczl Rocket Pods Updated! Processor: Intel Q6600 @ 3.00GHz GPU: GeForce MSI RTX 2060 6GB RAM: Crucial 8GB DDR2 HDD: 1TBGB Crucial SSD OS: Windows 10, 64-bit Peripherals: Logitech G940 Hotas, TrackiR 5, Voice Activated commands , Sharkoon 5.1 headset. ,Touch Control for iPad, JoyToKey Link to comment Share on other sites More sharing options...
jib Posted February 24, 2012 Share Posted February 24, 2012 I can't get this second version to run, it say msvrc100.dll is missing. it did this with the first one until i installed the Visual C++ Redistributable : http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/the-program-cant-start-becuase-msvcr100dll-is/5c9d301a-2191-4edb-916e-5e4958558090 The older 64bit version works still but this new one doesn't. Did you compile it in 64bit? Thanks. Jib. Mods I use: KA-50 JTAC - Better Fire and Smoke - Unchain Rudder from trim KA50 - Sim FFB for G940 - Beczl Rocket Pods Updated! Processor: Intel Q6600 @ 3.00GHz GPU: GeForce MSI RTX 2060 6GB RAM: Crucial 8GB DDR2 HDD: 1TBGB Crucial SSD OS: Windows 10, 64-bit Peripherals: Logitech G940 Hotas, TrackiR 5, Voice Activated commands , Sharkoon 5.1 headset. ,Touch Control for iPad, JoyToKey Link to comment Share on other sites More sharing options...
jib Posted April 18, 2012 Share Posted April 18, 2012 average_pilot Thank you very much for posting an updated 64bit version the axis are now the correct way around:smilewink: and I really like being able to tweak the 3 different force feedback effects. Unfortunately the simFFB app has the some problem with my G940 in that it will not release the pressure until the button is released:mad: it is probebly somthing in the driver that logitech needs to fix. I you can think of a workaround that would be great! Thank you! Mods I use: KA-50 JTAC - Better Fire and Smoke - Unchain Rudder from trim KA50 - Sim FFB for G940 - Beczl Rocket Pods Updated! Processor: Intel Q6600 @ 3.00GHz GPU: GeForce MSI RTX 2060 6GB RAM: Crucial 8GB DDR2 HDD: 1TBGB Crucial SSD OS: Windows 10, 64-bit Peripherals: Logitech G940 Hotas, TrackiR 5, Voice Activated commands , Sharkoon 5.1 headset. ,Touch Control for iPad, JoyToKey Link to comment Share on other sites More sharing options...
PeterP Posted April 18, 2012 Share Posted April 18, 2012 Write a script that will rapidly press and release "t" when you press your trimmer button - maybe this will give you a smoother experience when moving the stick with pressed trim. Link to comment Share on other sites More sharing options...
jib Posted April 20, 2012 Share Posted April 20, 2012 (edited) Write a script that will rapidly press and release "t" when you press your trimmer button - maybe this will give you a smoother experience when moving the stick with pressed trim. This is what I usually do. But with average_pilot's program I will need to write something that repeatedly sends a joybutton 6. Im not sure what program will do this perhaps joytokey? Edited April 20, 2012 by jib Mods I use: KA-50 JTAC - Better Fire and Smoke - Unchain Rudder from trim KA50 - Sim FFB for G940 - Beczl Rocket Pods Updated! Processor: Intel Q6600 @ 3.00GHz GPU: GeForce MSI RTX 2060 6GB RAM: Crucial 8GB DDR2 HDD: 1TBGB Crucial SSD OS: Windows 10, 64-bit Peripherals: Logitech G940 Hotas, TrackiR 5, Voice Activated commands , Sharkoon 5.1 headset. ,Touch Control for iPad, JoyToKey Link to comment Share on other sites More sharing options...
PeterP Posted April 20, 2012 Share Posted April 20, 2012 This is what I usually do. But with average_pilot's program I will need to write something that repeatedly sends a joybutton 6. Im not sure what program will do this perhaps joytokey? Ahh -I forgot -that this was the starting point of your "journey" :) Yes - Joytokey/Autohotkey/PPjoy are the obvious suspects for this job. You can choose by favour/liking. Link to comment Share on other sites More sharing options...
average_pilot Posted April 29, 2012 Author Share Posted April 29, 2012 average_pilot Thank you very much for posting an updated 64bit version the axis are now the correct way around:smilewink: and I really like being able to tweak the 3 different force feedback effects. Unfortunately the simFFB app has the some problem with my G940 in that it will not release the pressure until the button is released:mad: it is probebly somthing in the driver that logitech needs to fix. I you can think of a workaround that would be great! Thank you!What does it do exactly? What I'm understanding is: you press, no change. You release and the centring force disappears for an instant and returns. Are you testing it first with Black Shark not running? What does it happen if you move the centring force slider to the minimum? You shouldn't need any trick with the 'T' key if this ends up working as it should. And you should configure the joystick button as trimmer. Link to comment Share on other sites More sharing options...
jib Posted May 1, 2012 Share Posted May 1, 2012 I think it is a problem with the G940 driver because it still happens when black shark is not running. If you but the centering force to 0 it goes all sloppy. If you are thinking what I'm thinking you could programmatically set the centering force to 0 when the button is pressed and put it back to the previous value when released to get around the driver problem. Mods I use: KA-50 JTAC - Better Fire and Smoke - Unchain Rudder from trim KA50 - Sim FFB for G940 - Beczl Rocket Pods Updated! Processor: Intel Q6600 @ 3.00GHz GPU: GeForce MSI RTX 2060 6GB RAM: Crucial 8GB DDR2 HDD: 1TBGB Crucial SSD OS: Windows 10, 64-bit Peripherals: Logitech G940 Hotas, TrackiR 5, Voice Activated commands , Sharkoon 5.1 headset. ,Touch Control for iPad, JoyToKey Link to comment Share on other sites More sharing options...
average_pilot Posted May 2, 2012 Author Share Posted May 2, 2012 I already did that in the last version. The most strange is that it calls the same code when moving the slider and when pressing the button. Maybe it's a problem with the way the driver reports the buttons state, and not with force feedback itself. I'm thinking I could set a small value other than 0, like 10%, and see if it works. And store the settings when closing the program. Link to comment Share on other sites More sharing options...
monsterZER0 Posted June 14, 2012 Share Posted June 14, 2012 Just wanted to drop by and say thanks average_pilot! I downloaded this and it works GREAT with DCS:P-51 and my MSFFB2... This is EXACTLY what MSFFB2 owners need; you should definitely put this up over at SimHQ or Hovercontrol. I'm actually looking forward to flying helo's in Arma2 now, as they used to suck with my FFB stick. :joystick: Please continue to work on this project! I would definitely be willing to pay for more options! Core i5 750 @ 3.4Ghz | 8gb G.Skill Ripjaws DDR3 1600 | ASUS P7P55D | ATI Radeon HD6970 Link to comment Share on other sites More sharing options...
average_pilot Posted June 20, 2012 Author Share Posted June 20, 2012 thanks for the words of support, monsterZERO. I'll try to find the time to continue working on it. Link to comment Share on other sites More sharing options...
PeterP Posted June 27, 2012 Share Posted June 27, 2012 (edited) Nice to hear you will revisit this. As I already said ... a ++ would be to implement the function to add four buttons to trim the stick gradually - so it is also usable for Fixed-wing . And the GUI should look similar like this ;) Further : Is it somehow possible to send different FFB commands to different controllers at same time... ? I have in mind that this function would allow you to to build FFB rudders out of e.g. a Racing wheel. ( :P this would make things much easier for me... see what I'm planing to do to overcome this issue : http://forums.eagle.ru/showthread.php?p=1470471#post1470471) Here is a another fictional GUI that reflects this idea : More ideas: The program should maybe also have something like a timer to initiate (and/or a hotkey). Means that you don't have to alt-tab any-more in DCS to restart the script. So you start the program before a mission - and lets say, after 2min it initiates again. Just in time when you are in the Cockpit. Edited June 27, 2012 by PeterP Link to comment Share on other sites More sharing options...
CyBerkut Posted June 27, 2012 Share Posted June 27, 2012 PeterP, the last thing I remember seeing on multiple FFB devices, was that TriggerHappy had determined that it would not work (as of BlackShark version 1). Like yourself, I was looking at adapting an FFB steering wheel to make FFB pedals to use in conjunction with an FFB stick to pursue getting a Force Trim setup working the way it ought to. Perhaps E.D. has incorporated a remedy to that single FFB device limit, but if so, I'm unaware of it. TriggerHappy's solution was to make controllers whose centering system could free float while the trim button was depressed, and lock down (via solenoids) when the trim button was released. Currently, if I ever get off my butt, that would be the approach I would pursue also. Mine wouldn't be nearly as nice as TriggerHappy's though. I like that rudder pedal design you posted that could accomodate both helicopter and fixed wing style trimming. Very nice concept! [sIGPIC][/sIGPIC] There's no place like 127.0.0.1 Link to comment Share on other sites More sharing options...
Slayer Posted July 7, 2012 Share Posted July 7, 2012 Thus you must merge controllers to get FFB function across controllers. It's the same problem joystick companies face and a remnant of older windows versions....something that has slipped through the cracks because MS no longer is in the FFB game. It's the same reason TARGET merges all controllers to 1. MOST modern day sims support multiple controls easily but poorly written games like battlefield only support 1 control. Currently all FFB implementations only support one control. maybe some ingenious programmer coud somehow use PPJoy or something similar to mix and match FFB controls and reprot them to windows as 1 unified control then it MIGHT work. You would have to make a custom device then a custom FFb file... At any rate it would have to be a custom implementation. You wont get ED to rewrite the FFB standard thats been around forever and MS doesnt care... Might be some help here: http://msdn.microsoft.com/en-us/library/windows/desktop/bb153254(v=vs.85).aspx [sIGPIC][/sIGPIC] System Specs Intel I7-3930K, Asrock EXTREME9, EVGA TITAN, Mushkin Chronos SSD, 16GB G.SKILL Ripjaws Z series 2133, TM Warthog and MFD's, Saitek Proflight Combat pedals, TrackIR 5 + TrackClip PRO, Windows 7 x64, 3-Asus VS2248H-P monitors, Thermaltake Level 10 GT, Obutto cockpit Link to comment Share on other sites More sharing options...
P1KW Posted November 23, 2012 Share Posted November 23, 2012 It's really fantastic. Has a reputation, a beer, or a donation. great job In DCSW fixes a bug, but in X-Plane you added functionality Force-Trim. Incredible! Without your permission I posted your program, in X-Plane.org forum. http://forums.x-plane.org/index.php?showtopic=63292 Hope it's not an inconvenience. I suggest you add a button to it; Make a donation. Greetings! :thumbup: "If adventure is dangerous, try the routine. It is deadly." Paulo Coelho. Link to comment Share on other sites More sharing options...
average_pilot Posted November 25, 2012 Author Share Posted November 25, 2012 Seeing that it's useful for some of you, I'm very sorry not being able to add features to my little program. Specially I'd like to find a fix for G940's strange behaviour. I did one more thing to it. Now it saves options to a file so it loads them at start-up. I didn't post it here yet. x-plane... is there people in that sect still? Link to comment Share on other sites More sharing options...
JEKA-KRbIM Posted December 14, 2012 Share Posted December 14, 2012 (edited) ПОС ЛИ ОБНОВЛЕНИЯ. Я НЕ МОГУ ПОЛЕТАТЬ, И ОТ DCS Я ПОМОЩИ НЕ ДОЖДУСЬ. ПАЦАНЫ ПОМОГИТЕ. ТАК ХОЧУ ПОЛЕТАТЬ. ОСЬ ПО КРЕНУ ТРИММЕРА ПЕРЕПУТАЛИ. ПРОГРАММУ Я ЗАПУСКАЛ НЕ ПОМОГАЕТ SIMFF!!! http://www.youtube.com/watch?v=4DV2tHep6Yo НА ВИДЕО В ПЕРВОЙ КА50 ВСЁ ОК. А ВОТ В КА50 WORLD. PIC whether the update. I CAN NOT fly, people help. So I want to fly. SHAFT TRIMMER messed up the roll. PROGRAM I run does not help SIMFF!!! http://www.youtube.com/watch?v=4DV2tHep6Yo VIDEO IN FIRST KA50 ALL OK. But in KA50 WORLD. Edited December 14, 2012 by JEKA-KRbIM Maximus V Gene Z77. I5 2500K 4.5GHZ.gtx 780 ti windforce. SAMSUNG 55 1920-1080+SAMSUNG 23 2048-1152 ШКВАЛ АБРИС. LOGITECH G940- ПЕДАЛИ С МИ-8. G930. TrackIR 5. Link to comment Share on other sites More sharing options...
average_pilot Posted December 14, 2012 Author Share Posted December 14, 2012 (edited) Try this version and let me know how it goes. First, try it without launching DCS. If it doesn't work as expected, make a video using simffb so I can understand the problem.simFFB_32.zipsimFFB_64.zip Edited June 5, 2013 by average_pilot Link to comment Share on other sites More sharing options...
P1KW Posted December 15, 2012 Share Posted December 15, 2012 Alright. While holding the trimmer button, there is no tension on the spring force. Well, well. Thank you very much for your work. Greetings! "If adventure is dangerous, try the routine. It is deadly." Paulo Coelho. Link to comment Share on other sites More sharing options...
average_pilot Posted December 15, 2012 Author Share Posted December 15, 2012 Alright. While holding the trimmer button, there is no tension on the spring forceWhich joystick? 1 Link to comment Share on other sites More sharing options...
P1KW Posted December 15, 2012 Share Posted December 15, 2012 Which joystick? G940. :smilewink: The save function works perfectly. The only thing is that I have detected a vibration when trimming in all back position. If I can this weekend, I make a video to show it. Thanks again for your work, greetings! "If adventure is dangerous, try the routine. It is deadly." Paulo Coelho. Link to comment Share on other sites More sharing options...
jib Posted January 19, 2013 Share Posted January 19, 2013 The attachments link is no longer working for the 64 bit version any chance of a new link? Mods I use: KA-50 JTAC - Better Fire and Smoke - Unchain Rudder from trim KA50 - Sim FFB for G940 - Beczl Rocket Pods Updated! Processor: Intel Q6600 @ 3.00GHz GPU: GeForce MSI RTX 2060 6GB RAM: Crucial 8GB DDR2 HDD: 1TBGB Crucial SSD OS: Windows 10, 64-bit Peripherals: Logitech G940 Hotas, TrackiR 5, Voice Activated commands , Sharkoon 5.1 headset. ,Touch Control for iPad, JoyToKey Link to comment Share on other sites More sharing options...
average_pilot Posted January 19, 2013 Author Share Posted January 19, 2013 (edited) I'll upload as soon as possible. The 32 bits version should work the same anyway. EDIT: Done Edited January 20, 2013 by average_pilot Link to comment Share on other sites More sharing options...
jib Posted January 21, 2013 Share Posted January 21, 2013 Thank's very much average_pilot. I never got either version working properly on my windows 7 system, but now I have re-installed with windows 8 I works great! I can fly my Black Shark again!:joystick: Thank you. Mods I use: KA-50 JTAC - Better Fire and Smoke - Unchain Rudder from trim KA50 - Sim FFB for G940 - Beczl Rocket Pods Updated! Processor: Intel Q6600 @ 3.00GHz GPU: GeForce MSI RTX 2060 6GB RAM: Crucial 8GB DDR2 HDD: 1TBGB Crucial SSD OS: Windows 10, 64-bit Peripherals: Logitech G940 Hotas, TrackiR 5, Voice Activated commands , Sharkoon 5.1 headset. ,Touch Control for iPad, JoyToKey Link to comment Share on other sites More sharing options...
Jaximus Decimus Posted May 16, 2013 Share Posted May 16, 2013 I know I'm way late to the party here, but I've just got to chime in and say this program is amazing. My G940 has never felt better. Truly an excellent job you have done, AP. My only regret is that is doesn't seem to work with Take On Helicopters. I spent some time yesterday trying to get it working, but ToH just won't relinquish FFB control. The two programs just kind of fight each other and I never was able to figure out a way to completely kill ToH's FFB. WHat a shame, because this is really excellent. I give it an 11 out of 10. Link to comment Share on other sites More sharing options...
Recommended Posts